SPL REPAIR TO T- 51, P-13 UNDER 441 (I) SUP PL, SPL REPAIR TO T-52, 6 X DOORS AT

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) post embaded in concrete, brick work masonary, any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams above 4.00 Mtr and upto 8 Mtr

Excavation in post holes in any type of soil each not exceeding 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surface all as specified.

Plain cement concrete 1:4:8, type D2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Mild steel work as in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confirming to IS 1161-1979 grade St 240 with one shop coat of zinc chromate primer paint complete all as specified and directed..

Rolled Mild steel Plates (plain or Chequred) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - O or Fe 310 - O.complete all as specified and directed..

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and directed.

Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed..

Demolition of ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling, built in Cement mortar/ Cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar/ cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed..

Brickwork with modular size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed..

Precast cement concrete solid block masonry using solid block of grade C-5 (1:5:8) exc 10cm in width, built in CM 1:6 complete all as specified and direted.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth (with out using extra cement) complete all as specified and directed.

15 mm thick rendering in CM 1:4 on brick or concrete masonary surfaces other than fair face of brick work surface finished even and smooth (with out using extra cement) complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of chalk whitining complete all as specified and directed .

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed..

Complete removal of existing treatment from old plastered ceiling surfaces and applying two coats of oil bond distemper over one coat of chalk whitening complete all as specified and directed.

Providing, cement concrete type B1 (1:2:4) 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling of wall & ceiling bords (Fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre.including necessary fixing/ repair /replacement of existing elecrical fittings at site complete all as specified and directed.

Hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

Gypsum board 12 mm thick for insulation and accoustic purposes, 60 cm x 60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

Stop cock cast copper alloy, chromium plated, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed of size 15 mm bore, fixed in repairs complete all as specified and directed.

Bib tap, 15 mm bore, cast copper alloy, chromium plated,fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed in repairs complete all as speciified and directed.

Ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (minimum weight 210 gm),fixed in repairs complete all as specified and directed.

Gun metal globe or gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

2000 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top) ISI marked, hoisted and fixed in position as in repairs, complete all as specified and directed.

Towel rail 600 mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs complete all as specified and directed.

Soap dish, vitreous China white, approximate size 160 mm x 160 mm x 90 mm, fixed in position with screws and gutties complete all as specified and directed.

Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) fixed in position complete all as specified and directed.

PVC Connection 15 mm bore, 600 mm long, with PTMT nuts, fixed in repairs complete all as specified and directed.

10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs, complete all as specified and directed.

Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviciable tiles to store and rubbish off the premises all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Cement concrete in 1:4:8, type D-2 using 20 mm graded stone aggregate, 100 mm thick as in floors and pavings finishing surface fair and even complete all as specified and directed.

100 mm thick PCC 1:2:4, type B2, using 40 mm graded stone aggregate as in sub base of flooring finishing surface even and smooth with out using extra cement complete all as specified and directed.

Mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Vitreous china wash down water closet pan ( padestal pattern) any colour P or S trap with and including plastic seat cover with connections, fixed in repairs complete all as specified and directed.

Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed.

Wash hand basin vitreous China white , flat back or angle type of size 580 X 450 mm including pillar tap 15 mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connections as in repairs complete all as specified and directed.

Vitreous china urinal, half stall type white (excluding flushing cistern,flush pipe and bent pipes) including pair of brackets , PVC waste & Vent pipe, and connection, fixed in repairs complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or under floors, as in repairs, complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore,fixed in repairs complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or under floors, as in repairs, complete all as specified and directed.

PVC (SWR) bends any radius with access door of 75 mm bore,fixed in repairs complete all as specified and directed.

75 mm bore PVC (SWR) floor trap plain with gratings including jointing with solvent cement, fixed in position including PCC 1:2:4, type B1 as required complete all as specified and directed..

Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and direted.

3 mm thick sheet glass ordinary quality with oil putty/wooden beading in square not exceeding 0.50 sqm in each pane including hacking out old existing broken glass pieces complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc complete all as specified and directed.

Granite of any type work (table rubbed and polishing) in steps,jambs,pillars,windowcill,cooking platform and like in CM(1:4) including pointing to white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Machine cut cudappah stone slab 20-25 mm thick laid over and including 20 mm thick bedding layer CM 1:6 and jointed and pointed in grey cement slurry with pigments to match the shade of slab including rubbing and polishing complete all as specified and directed.

Hardcore of gauge exc 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) n.exc 1.50 sqm each and removing from siteand making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm but not exc 4 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

2nd class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

35 mm thick second class hardwood, factory made , plain framed ,panelled shutter with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming toIS-710. the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & directed

35 mm thick second class hardwood, gauged & skeleton shutters, factory made open rebated and prepared to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc., size of members of shutter shall be as spd in SSR 1991 Part-I, member shall be kiln seasoned as IS-1141 & chemically pressure treated as per IS-401 complete all as specified & directed.

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004.

Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing of SSR pt II 2010 and fixed complete all as specified and directed.

Mild steel butt hinzes 100 mm long medium weight cold rolled, ISI marked fixed complete all as specified and directed.

300 mm long rat tail helical door spring including roller and roller plate , fixed in repairs complete all as specified and directed.

Aluminum anodised barrel tower bolt 150 mm long of extruded aluminium section, fixed complete all as specified and directed.

Aluminum handle 125 mm long fabricated type, anodised, fixed complete all as specified and directed.

Mild steel sliding door bolts clip type 300 mm long stove enamelled black with bright bolt not less than 16mm dia with & incl a minimum of 6 bolts & nuts four on bolt plate and two on staple plate fixed complete all as specified & directed.

Taking down old steel window / ventilator of any size & type and making good the disturbed surface complete all as specified and directed.

Factory made steel windows or ventilators , fixed type with glazing bars etc complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets etc and removing materials to store for keeping in safe custody or for credit and making good disturbed surfaces of walls, floors etc complete all as specified & directed.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for the following :-

One light/fan point controlled by one switch complete all as specified & directed.

One 3 pin socket outlet 5 Amp on same board with other switches complete all as specified & directed.

One 3 pin socket outlet 5 Amps on independent board complete all as specified & directed.

All as per item No. 2 here-in-before but with 4.0 sqmm copper conductor cable with 2.5 sqmm copper conductor cable as earth wire for socket outlet 15 Amp complete all as specified & directed.

One bell point controlled by one switch complete all as specified & directed.

Socket outlet 2 in 1, 3 pin, 5 pin, 15 Amps, flush type, ISI marked fixed complete all as specified & directed.

Switch piano, flush type, single pole,1 way 5 Amp, ISI marked, fixed complete all as specified & directed.

Socket outlet 2 in 1, 3 pin 5/6A flush type, ISI marked, fixed complete all as specified & directed.

Switch piano, single pole, flush type, 1 way 5 Amp, ISI marked, fixed complete all as specified & directed.

Bell push switch 6 Amp, ISI marked, fixed complete all as specified & directed.

Electric bell AC 230 Volts single pole, ISI marked, fixed complete all as specified & directed.

High efficiency LED 20 W aluminium linear batten type complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size and length fixed in replacement complete all as specified and directed.

LED mirror light fitting 10 W complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size and length fixed in position complete all as specified and directed.

Lamp holder, angle/ batten type PVC / Polycarbonate type with back plate suitable for batten fittings including 10 watt LED bulb/tube complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

MCB isolator TPN 63 Amps, 415 volts, ISI marked complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

MCB DP, 40 Amps, 240 volts, ISI marked complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

Sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way with 200 Amps rated busbar, fixed in replacement complete all as specified and diercted. Make- HPL/Standard/ L&T/Schieder/Legrand

Ceiling rose surface PVC 65 x 50 mm dia, 3 terminals including PVC mounting block, white/ivory finish fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts, fixed in replacement complete all as specified and diercted.Make- HPL/Standard/ L&T/Schieder/Legrand

Sheet metal enclosures with plug and socket, single pole and neutral with two pin and earth plug and with and including one MCB of 20 Amps (SP), fixed in replacement complete all as specified and directed. Make- Standard/ Legrand/ Schenider/HPL

Earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick, buried directly in ground earth pit not less than 2.25 meter in depth with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized iron wire 4 mm dia earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron as required, including watering arrangement with 20 mm bore medium grade GI tubing, funnel and wire mesh, PCC chamber with CI frame and cover , necessary excavation, returning filling and removal of surplus soil, filling of charcoal and salt in alternate layer complete all as shown in plate No 5 of MES Schedule Part I including testing complete all as specified and directed.

Fan regulator electronic 5 step, socket type,230 volts, 450 watts suitable for ceiling fan 1200 /1400 mm sweep, including connecting up and fixed in replacement complete all as specified & directed. Make -Havells / Leader /Vinay/ Anchor.

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade cables 2.50 Sqmm drawn through in and including PVC casing caping of suitable size including 1.50 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Make : Havells/Polycab/HPL/Plaza

Submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100 Volts grade cables 4 Sqmm drawn through in and including PVC casing caping of suitable size including 2.50 Sqmm 1100 Volts grade PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Make : Havells/Polycab/HPL/Plaza

LED ceiling light 40 W of size (2' x 2') complete including proper connections complete all as speified and directed.

MCCB four pole,100 Amp, 50 Hz, 415V with rupturing capacity 35 KA fixed on and including wooden board of suitable size complete all as specified and directed.

Water heater storage type (geyser), electric 25 Ltrs capacity BEE 5 star rating complete including fixing arrangement with achoring bolts, GI pipe of suilable length, PVC pipe and other accessories as per site requirement complete complete all as specified and directed. Make : Havells / Bajaj / Crompton

15 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and directed.

Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body copper wound with self opening and closing louvers for protection from birds and rain water , fixing by means of rugged bolts, nuts and washers etc. and foundation brackets, making connection from ceiling rose to fan with and including 1.5 sqmm conductor cable including making hole in existing stone masonary/ brick wall complete and testing at site complete all as specified and directed.

Bib tap 15 mm bore cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed of size 15 mm bore complete all as specified and directed.

D V Engineers and Contractors Pvt Ltd