Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹43.1 L+₹67,629 (1.59%)Rejected-Finance PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹43.9 L+₹1.4 L (3.42%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIR TO LT POLES, CABLES AND ALLIED WORKS AT LEKHAPANI
2023_MES_613756_1
8755/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class D and category b (i)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹95,000
Yes
6 Oct 2023
14 Aug 2023
18 Sept 2023
14 Aug 2023
11 Sept 2023
28 Aug 2023
Amount
Dismantling ACSR conductors from the disturbed span including jumper, removing the binding from insulator, of any size for LT OH Line/ structures, etc complete all specified and as directed.
Dismantling/taking down old unserviceable cross arms, bracings, support, clamp including nuts, bolts and washers complete.all as specified and directed.
Dismantling insulators any type, any size complete all as specified and directed.
Dismantling of stay assembly complete including bolts, nuts & washers etc. of any description any size and removing from the site complete all as specified and as directed.
Dismantling and taking out broken PSC poles of any type and removing from site complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out/for laying under ground cables/pipes etc and getting out in soft/loose soil complete all as specified and directed.
All as per item No. 06 above, but depth exceeding 1.5 mtr and not exceeding 3 mtr complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n-exc 25 cm complete all as specified and directed.
Removing excavated soil to a distance n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply and spreading fine river sand in trenches for cushioning of under ground cable/filling cable ducts acomplete all as specified and as directed. Note : - Only punned thickness shall be measured for payment purpose
Supply and lay burnt brick sub class ‘B’ of standard size laid in trenches as protection to cables complete all as specified and directed.
M&L Boring of holes under road, pavement, hard standing by manually technique for 40-80 mm dia pipe all as specified and as directed by Engineer-in-Charge.
M&L for GI grade of sizes 80mm dia (pipe light), ISI marked with all fitting for cable protection, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc complete all as specified and as directed by Engineer-in-Charge.
All as per item No. 13 above but size 50mm dia. complete all as specified and as directed by the Engineer-in-Charge.
All as per item No. 13 above but size 40mm dia.complete all as specified and directed by the Engineer-in-Charge.
M&L for PVC Flexible suction hose pipe (light grade), of 40mm dia, laid in trenches, under coping, bend or fixing on wall/pole/ crossing nallah etc complete all as specified and as directed by Engineer-in-Charge.
Supply, laying & testing insulated XLPE UG cable 1100 volts grade, armoured heavy duty confirming to relevant IS specifcations with aluminum conductor of size 120 sqmm 3.5 core complete all as specified and as directed.
All as per item No. 17 above but 95 sq mm 3.5 core complete all as directed.
All as per item No. 17 above but 50 sq mm 3.5 core complete all as directed.
All as per item No. 17 above but 25 sq mm 4.0 core complete all as specified and directed.
All as per item No. 17 above but 16 sq mm 4.0 core complete all as specified and directed.
All as per item No. 17 above but 16 sq mm 2.0 core complete all as specified and as directed.
All as per item No. 17 above but 10 sq mm 2.0 core complete all as specified and as directed.
M&L Straight through joints (heat shrinkable type) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 25 to 50 sqmm 3.5/4.0 core and testing complete all as specefied and as directed.
M&L Straight through joints (heat shrinkable type) cable joint kit including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 95 to 120 sqmm 3.5 core and testing complete all as specefied and as directed.
M&L Steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP- 31, 9 metres long including erection, painting with two coat of synthetic enamel paint over a coat of red oxide or primer complete all as specified and directed. (Note Excavation earth work and PCC paid and measured seperately)
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in road cutting, pole foundation, stay concrete etc including necessary form work and making good surfaces,complete all as specified and directed.
M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in coping including necessary form work and finishing exposed surfaces with 3 coats of white washing,etc complete all as specified and directed.
S&F Thermo plastic cable terminal box of size not less than 167x125x82mm including terminals with locking arrangments including necessary mounting arrangement of any steel tubular/RCC poles with suitable size of clamps nuts bolts washer etc. fixed with poles including one single pole MCB of capacity 6-32A and PVC connector for cable termination complete all as specified and directed.
S&F Weather proof copper three core cable of size 1.0 Sqmm drawn in and including UPVC conduit medium grade fixed to pole/wall with suitable size clamps or fixing accessories complete all as specified and directed.
S&F Street light bracket decorative type single arm fixing on top of the pole, made of GI pipe light grade pipe size not less than 1.0 Mtr, 32 mm dia as per sample and fixed with suitable size of MS clamps, nut, bolt, washers, welding work as required etc to poles/walls complete all as specified and directed.
S&F LED Street light fitting 1 x 60/70 Watt pressure die cast housing heat resistant toughened glass with frame, IP - 66 protection, uniform distribution connecting up complete with suitable size PVC insulated wire ISI marked, including taking out the existing fully rusted unserviceable fittings and deposit to MES store complete all as specified and as directed.
M&L Street light panel board factory made outdoor type suitable for connecting 6 KW, 3 phase load prefixed with the following accessories complete all as specified and as directed by Eng-in-charge. (a) MCB, 3 Pole, 40 Amp, 50Hz , 415V -01 No. (b) Digital timer switch (24 hrs operation) - 01 No. (c) Contactor 32 Amps capacity three phase, 415 Volts 50 Hz-01 No.
M & L for fabrication of LT feeder pillar box, indoor type, factory made totally enclosed, dust and vermin proof made out of 2.0 mm thick CRCA sheet of size not less then 1200mm x 1000mm x 450mm and mounted on MS angle 50 mm X 50 mm X 6 mm suitable for 3 Phase, 415 volts, AC supply, 50 Hz, aluminium bus bar with colour sleeve, mounted on insulator with opening door both side with rubber bedding, locking arrangement and painting to both internal and External surfaces with powder coating paint in heat process in grey colour comprising the following complete all as specified and as directed by Eng-in-charge. (i) BUSBAR :- Aluminium bus bar for TPN of minimum capacity 400 Amps- 01 (set of 04) (ii) INCOMING :- (a) MCCB, 4P, 400 Amps, 35 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 No. (b) Digital voltmeter 3 Phase( 0-500 volt) 96mm x 96mm having accuracy class 1.0, 4.5 digit LED display - 01 No. (c) Digital Ammeter three Phase having accuracy class 1.0, 4.5 digit 0.5 VA burden with LED display, size 96mm x 96mm with 3 Nos CT (200/5)- 01 No. (d) LED R-Y-B indicating lamps (Set of Three)- 01 set) (e) Instrumental control wiring MCB/fuse min 3 Amps - 03 Nos. (iii) OUTGOING:- (a) MCCB, 4P, 250 Amps, 35 kA rupturing capacity, 415 volts, AC, 50 Hz- 02 Nos (b) MCCB, 4P, 100 Amps, 25 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 Nos (c) MCCB, 3P, 40 Amps, 16 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 Nos (d) Digital timer switch (24 hrs operation) - 01 Nos (e) Contactor 32 Amps capacity three phase, 415 Volts 50 Hz NOTE:- The unit rate quoted deemed to be inclusive of wiring of panel board with copper wire of suitable size, gauge with connector, copper lugs including PCC (1:3:6) foundation 30 cm below GL and the box will be kept nearly 45 cm above GL with earthwork and allied services complete.
M & L for fabrication of LT feeder pillar box, out door type, double door, tent roof, factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made out of 3.15 mm thick CRCA sheet of size not less then 1400mm x 1100mm x 450mm and mounted on MS angle 50 mm X 50 mm X 6 mm suitable for 3 Phase, 415 volts, AC supply, 50 Hz, aluminium bus bar with colour sleeve, mounted on insulator with opening door both side with rubber bedding, locking arrangement and painting to both internal and external surfaces with powder coating paint in heat process in grey colour comprising the following complete all as specified and as directed by Eng-in-charge. (i) BUSBAR :- Aluminium bus bar for TPN of minimum capacity 400 Amps- 01 (set of 04) (ii) INCOMING :- (a) MCCB, 4P, 320 Amps, 35 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 No.(b) Digital voltmeter 3 Phase( 0-500 volt) 96mm x 96mm having accuracy class 1.0, 4.5 digit LED display - 01 No.(c) Digital Ammeter three Phase having accuracy class 1.0, 4.5 digit 0.5 VA burden with LED display, size 96mm x 96mm with 3 Nos CT (200/5)- 01 No (d) LED R-Y-B indicating lamps (Set of Three)- 01 set.(e) Instrumental control wiring MCB/fuse min 3 Amps - 03 Nos. (iii) OUTGOING:-(a) On load changeover switch, capacity 315A, 415 volts, AC, 50 Hz- 01 Nos.(b) MCCB, 3P, 63 Amps, 16 kA rupturing capacity, 415 volts, AC, 50 Hz- 06 Nos. NOTE:- The unit rate quoted deemed to be inclusive of wiring of panel board with copper wire of suitable size, gauge with connector, copper lugs including PCC (1:3:6) foundation 30 cm below GL and the box will be kept nearly 45 cm above GL with earthwork and allied services complete.
M & L for fabrication of LT feeder pillar box, out door type, double door, tent roof, factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made out of 3.15 mm thick CRCA sheet of size not less then 1000mm x 800mm x 450mm and mounted on MS angle 50 mm X 50 mm X 6 mm suitable for 3 Phase, 415 volts, AC supply, 50 Hz, aluminium bus bar with colour sleeve, mounted on insulator with opening door both side with rubber bedding, locking arrangement and painting to both internal and external surfaces with powder coating paint in heat process in grey colour comprising the following complete all as specified and directed by Eng-in-charge. (i) Aluminium bus bar for three phase with neutral of capacity 400 Amps- 01 set. (ii) INCOMING:- (a) MCCB, 4P, 200 Amps, 35 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 Nos.(b) LED R-Y-B indicating lamps (Set of Three)- 01 set. (iii) OUTGOING:-(a) MCCB, 4P, 125 Amps, 25 kA rupturing capacity, 415 volts, AC, 50 Hz- 02 Nos.(b) MCB SPN 40Amps, 10KA - 8 Nos. (06 Nos for service connection, 02 Nos for Spare) NOTE:- The unit rate quoted deemed to be inclusive of wiring of panel board with copper wire of suitable size, gauge with connector, copper lugs including PCC (1:3:6) foundation 30 cm below GL and the box will be kept nearly 45 cm above GL with earthwork and allied services complete.
M & L for fabrication of LT feeder pillar box, out door type, double door, tent roof, factory made totally enclosed, dust and vermin proof, double leaf shutter in front and rear side made out of 3.15 mm thick CRCA sheet of size not less then 900mm x 800mm x 450mm and mounted on MS angle 50 mm X 50 mm X 6 mm suitable for 3 Phase, 415 volts, AC supply, 50 Hz, aluminium bus bar with colour sleeve, mounted on insulator with opening door both side with rubber bedding, locking arrangement and painting to both internal and external surfaces with powder coating paint in heat process in grey colour comprising the following complete all as specified and directed by Engineer – in - charge. (i) Aluminium bus bar for three phase with neutral of capacity 400 Amps- 01 set. (ii) INCOMING:-(a) MCCB, 4P, 160 Amps, 25 kA rupturing capacity, 415 volts, AC, 50 Hz- 01 Nos.(b) LED R-Y-B indicating lamps (Set of Three)- 01 set. (iii) OUTGOING:-(a) MCCB, 4P, 100 Amps, 16 kA rupturing capacity, 415 volts, AC, 50 Hz- 02 Nos.(b) MCB SPN 40Amps, 10KA - 10 Nos. (08 Nos for service connection, 02 Nos for Spare) NOTE:- The unit rate quoted deemed to be inclusive of wiring of panel board with copper wire of suitable size, gauge with connector, copper lugs including PCC (1:3:6) foundation 30 cm below GL and the box will be kept nearly 45 cm above GL with earthwork and allied services complete.
S&F Bus bar chamber / LT distribution board outdoor top canopy type, made out of 3.15 mm thick CRCA sheet weather/vermin proof, front door open type, 3 phase 4 wire, 440 volts , AC, 50Hz, with TPN aluminium bus bar of capacity 200 Amps rated with PVC insulated colour code sleves, mounted on porceclain insulators, complete with R-Y-B indicating lamps, duly wired including locking arrangement , cable gland for incoming and outgoing cables of suitable sizes, panel size not less than 600mm x 600mm x 450mm, mounting MS angle base frame duly painted with synthetic enamel black paint and totally mounted on PCC(1:3:6) type C1 ( using 20 mm graded stone aggregate) foundation upto a height of 45 cm above ground level including earth work excavation and connecting items complete all as specified and directed by Eng-in-charge
M&L Preparation of surfaces and applying two coats aluminium paint over the exisiting steel tubular poles 7.5 - 9.20 mtrs above ground including cross arms/ bracings/clamps etc and 1.5 meter zebra lines with black & yellow colour paint bottom of the pole, after cleaning the existing poles and making good surface all surrounding and writing the pole numbers with white letters on black background all as specifeid and directed by the Engr-in-charge.
M&L Preparation of surfaces and for painting two coats of cement based paint after cleaning the existing PSC poles of height 7.0 - 9.20 mtr above ground including 1.5 meter zebra lines with black & yellow colour paint bottom of the pole and making good surface all surrounding and writing the pole numbers with white letters on black background all as specifeid and directed by the Engr-in-charge.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways and testing on completion complete all as specified & directed.
M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing on completion complete all as specified and as directed by the Engineer-in-charge.
RIA CONSTRUCTION
MAA COMMUNICATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .