Supplying and fixing Octagonal streetlight poles at nandini layout and drawing of streetlight lines in ward 44 of hubblli division

Supplying and fixing Octagonal streetlight poles at nandini layout and drawing of streetlight lines in ward 44 of hubblli division

Octagonal Poles 7 Mtrs Fabricating, supplying and erection of . ms long hot dip GalvanizedOctagonal hot dip Pole with BSEN 10025 grade S 355 JO steel platefor shaft, IS 2062 for base plate with door o...

M.S.Bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 10...

Mulit strand 2 Core Copper Wire SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitablefo...

LT UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...

Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 2.5 to 25Sqmm. ESCOMs SR 2025-26 Page No 201 Item No 21.05vvvvvv

Earth work excavation For UG Cable In all kinds of soils Depth upto 1.50 m Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specificati...

Pothead Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ESCOMs SR 2025-26 Page No 155 Item No 35.01

GI Pipe B - Class as per IS-1239 GI Pipe - 20 mm Dia BESCOM SR 2021-22 Page No 16 Item No 49.01

PLB Pipe 40/33 mm ESCOMs SR 2025-26 Page No 180 Item No 66.05

MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ...

MCB Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ...

Earth excavation Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as p...

Base Concerete Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as p...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Providing and laying in position Reniforced cement concrete for all foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

MS Box For Street Lights Controling Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provid...

Angle Frame Work Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of

Hylum Sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. Dimension 46x32...

Contactor Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-1394...

Timer Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting. PWD Ele SR 2-23-24 Page:21 Item no 5.4...

Fuse Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A PWD Ele SR 2-23-24 Page No.14 Item code 5.7.3

Wood Board Supply and fixing polished wood board made of not less than

15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs scre...

Lugs Aluminium End Terminal (Lug) 16 Sqmm ESCOMs SR 2025-26 Page No.176 Item code 60.03

RCC Poles RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 ESCOMs SR 2025-25 [Pg.No: 135 I.No:1.01

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ESCOMs SR 2025-26 [Pg.No: 190 I.No:2.02

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil ESCOMs SR 2025-26 [Pg.No: 189 I.No:1.1.1

Spiral Earth Electrodes as per standard technical specification as per BESCOM.

ESCOMs SR 2025-25 [Pg.No: 136 I.No:2.16

LT 2 Pin Cross Arm - GI

ESCOMs SR 2025-26 [Pg.No:136 I.No:2.08]

LT 4 Pin Cross Arm - GI

ESCOMs SR 2025-26 [Pg.No:136 I.No:2.06]

Fixing of 2 Pin & 4 Pin cross arm with Insulator and Braces fixing ESCOMs SR 2025-26 [Pg.No: 192 I.No:5.01

1.1 KV Pin Insulator

1.1 kV Ceramic Pin Insulator (Shell only) ESCOMs SR 2025-26 [Pg.No: 138 I.No:6.03

1.1 kV GI Pin for 1.1 kV Ceramic Shell Insulator ESCOMs SR 2025-26 [Pg.No:138 I.No:6.04]

No. 8 Strain Insulator

ESCOMs SR 2025-26 [Pg.No:138 I No:6.07)]

Rabbit Conductor

(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM ESCOMs SR 2025-26 [Pg.No:138 I.No:7.02)

Stringing of Conductor

Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps. ESCOMs SR 2025-26 [Pg.No:...

Guy Wire & GI Wire as per IS-2141

7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM ESCOMs SR 2025-26 [Pg.No:138 I.No:8.01]

MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2025-26 [Pg.No:137 I.No:5.09]

Turn Buckle (GI)

(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2025-26 [Pg.No:137 I.No:5.11]

Anchor Rod using 12 mm rounds/Guy Rod - MS

(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMs SR 2025-26 [Pg.No:137 I.No:5.12]

Digging of Pit for GUY SET

ordinary soil ESCOMs SR 2025-26 Page No 190 . Item No 1.7.1

Releasing & Restringing Of Conductor Restringing of loose spans, binding, straightening of inclined Pole etc. Note

1. Labour charges for releasing conductor is 90% of the corresponding stringing rates...

Straightening of Slant/Bent Pole 75% of the 8 Mtr. RCC Pole erection charges. ESCOMs SR 2025-26 Page No 198 . Item No 16.0

Bend Clamp Supplying and Fixing.mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL...