WBPWDSS/EE/BNK/NIT-16/25-26

Mobilisation Charges of all tools & Plants along with accessories, material, labour, supervision etc. at site of work required in connection with boring and testing work, including setting up boring rigs and shifting to different Bore-hole points etc. and also including withdrawal of same from the site after completion of work, complete as per direction of Engineer-in-Charge. b) Detailed Investigation

Carriage of all Disturbed & Undisturbed Samples from site of work to the Divisional office or elsewhere including loading and unloading as per direction of Engineer-in-Charge. Detailed Investigation

B Field Investigation: i) Shallow boring by auger and collection of disturbed sample upto 10m. Depth (In Clayey Silty soil) a) 0m.-6.0m.

A. Laboratory Investigation: xiii) Determination of Density Index (Relative Density of cohesion less soil) as per IS 2720 (Part – XIV).

B Field Investigation: xiv) Observation of Water Table

A. Laboratory Investigation: xvii) Laboratory Determination of Permeability as per IS 2720 (Part– XVII).

A. Laboratory Investigation: xxii) Determination of Organic Matter as per IS 2720 (Part– XXII).

A. Laboratory Investigation: xxiv) Determination of pH Value as per IS 2720 (Part– VIII).

A. Laboratory Investigation: xxv) Determination of Total Soluble Sulphate as per IS 2720 (Part– VIII).

A. Laboratory Investigation: xxvii) Determination of Free Swell Index of Soil as per IS 2720 (Part– VIII).

Preparation and submission of report in 6 (Six) copies, giving all relevant information data like site plan, Bore log and water table, test results, calculations, discussions, suggestions and recommendations in respect of suitable foundation etc. including determination of silt factor calculation of waterways and complete design of foundation including analysis of Bearing Capacities and settlements in bound and presentable form complete as per direction of Engineer-in-Charge. b) Detailed Investigation

LLabour for making Bore-Holes of 150mm to 250mm dia. by any standard method to any depth below ground level / bed level in all kinds of soil like clay, , silt, sand, stiff clay, mixed soils etc. except rocks (for the purpose of collecting Disturbed & Un disturbed soil samples, conducting Standard Penetration Test at suitable intervals etc.) including preparation and submission of bore-log as per IRC : 75 and 78 and Clause 2400 of Specifications for Road & Bridge Works (5th Revision), Published by IRC, and also including hire charges of tools and plants complete as per the direction of Engineer-in-Charge. b) When drilling mud “Bentonite of suitable consistency” is used to prevent collapse of bore hole. (i) Depth 0m to 10m (3 no bore hole)

B Field Investigation: iii) Collection of Samples from the bore hole made as per B-a (b) Disturbed (For 2 nos. bore)

B Field Investigation: v) Collection of Undisturbed soil sample from the bore hole to be made by the concerned Division / Party at their cost. (i)0.0m - 10.0m

B Field Investigation: vi) Standard Penetration Tests (S.P.T.) by Split Spoon Sampler in the bore hole as per IS 2131 (i)0.0m - 10.0m

A. Laboratory Investigation:

i) Liquid Limit as per IS 2720 (Part – V).

ii) Plastic Limit as per IS 2720 (Part – V)

iv) Grain size analysis by Hydrometer Method as per IS 2720 (Part – IV).

v) Determination of Water Content as per IS 2720 (Part – II).

vi) Determination of Specific Gravity as per IS 2720 (Part – III)

viii) Determination of Unconfined Compression Strength as per IS 2720 (Part – X). a) Undisturbed.

xvi) Tri-Axial Shear Test. a) Determination of Shear strength Parameters of a specimen tested in Unconsolidated Undrained Tri-axial compression without measurement of pore water pressure as per IS 2720 (Part – XI).

xiv) Determination of Consolidation Properties as per IS 2720 (Part – XIV).

B. (I) FIELD TEST ON ROCKS : Boring and drilling of rocks and collection / recovery of rock core including supplying information on the physical condition and type of rock, length of pieces of core, joints, colour, weathering changes and other effects in the drilling logs as per IS 4464 and IS 5313 complete. a) By Diamond Drills

Sub Total for item no. 1 to 17

Add 18% extra in respect of GST on all items on Sub-Total

Add 1% extra in respect of Labour Welfare Cess on (sub total + GST 18%)

Please Enable Macros to View BoQ information