REPAIR/ REPLACEMENT OF LT UG CABLE, LT PANEL ,JUNCTION BOX AND EXTERNAL ELECTRICFICATION REPAIR AT AF STN THOISE

Amount

Excavation in trenches n.exc. 1.5 mtr wide and n.exc 1.5 mtr deep for foundations of poles/stays/cable etc not exc 10 Sqm area on plan and getting out in Hard/Dense soil complete all as specifed and as directed by Engineer-in-Charge.

Returning filling in including spreading levelling, watering and well ramming in layer each not exc. 25 cm thick in a soft/loose soil complete all as specified and directed by Enginer-in-Charge.

Removing surplus soil to a distance not exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed. Note:-Excavation and earth work to be measured and paid for separately

Sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness of sand shall be measured.

M&L for in repair / replacment XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 16.0 Sqmm, 2-core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and as directed.

All as per Srl Item No 6 above but of size cross-sectional area 16.0 Sqmm, 4 -core.

All as per Srl Item No 6 above but of size cross-sectional area 25.0 Sqmm, 4 -core.

All as per Srl Item No 6 above but of size cross-sectional area 35.0 Sqmm, 4 -core.

All as per Srl Item No 6 above but of size cross-sectional area 50.0 Sqmm, 3.5 -core.

All as per Srl Item No 6 above but of size cross-sectional area 70.0 Sqmm, 3.5 -core.

All as per Srl Item No 6 above but of size cross-sectional area 95.0 Sqmm, 3.5 -core.

All as per Srl Item No 6 above but of size cross-sectional area 150.0 Sqmm, 3.5 -core.

All as per Srl Item No 6 above but of size cross-sectional area 185.0 Sqmm, 3.5 -core.

S & F in replacement Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 120 sqmm, complete all as specified and directed. Make : Denson/ M Seal/ Raychem

Replacement of old unserviceable/ damaged MCCB with new MCCB, four pole, 415 Volts, adjustable thermal and fixed magnetic setting,63 Amps with breaking capacity 16 KA, having indicating lamp, Ics=100% Icu and as per IEC 60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: Schneider cat part No- LV426167 or equivalent in in L&T/ Legrand/ ABB/ Merlin Gerin/ Siemen/ havells

All as per Srl Item No 16 above but of size Capacity 100 Amps with Breaking Capacity 16 KA

S&F LT Junction box for street lights, Sheet Moulding Compound (SMC), hinged door type and locking arrangement, off white colour of size 155 x 155 x 100 mm (internal dimensions) comprising 2 Nos aluminium busbar of adequate capacity including suitable size MS clamps all as directed, including taking down old unserviceable junction box complete. Make: Sintex or equivalent

Attanding day to day complaints for maintenance and repair of LT Network of any type and any specifications or any accessories related to Electric Supply of any descriptions, fitted/ fixed on poles, buildings or watching towers of any heights and any location, and re-fixing the same after necessary repairs/ replacement of defective parts including rectifying the same as per directions by concerned JE E/M and Engineer-In-Charge, at various locations, complete all as specified and directed by Engineer-In-Charge.Note: (i) Cost of T&P, ladder or mechanical lift shall be deemed included in quoted rate. (ii) Supply of spare parts of light fittings shall be measured and paid separately.

Note: The work under subject BoQ (item No. 1 to 18) is meant for maint of External Electric Supply in AF Stn Thoise under GE(AF ) Thoise. The work shall be executed on ground on required basis. Contractor shall deploy sufficient resources to keep smooth working of External Electric Supply in the AF station. Contractor or his representative will daily attend the complaints at E/M complaint cell and in addition any breakdown shall be communicated to contractor or his representative by concerned Engineer-in-charge/JE E/M through phone call, text message, complaint slip and or in writing through site order book or through other means. Non complying of attending breakdown by contractor within 24 hours after notify the complaint, recovery @ Rs 1500/- per day shall be recovered from contractor's payment for each complaint so notified.

EESSI

FANGALIA TRADERS