REPAIRS/ REPLACEMENT OF UNSERVICEABLE ALUMINIUM WIRING INTO COPPER WIRING, REPAIR/ REPLACEMENT OF CONVENTIONAL LIGHT FITTINGS INTO LED FITTINGS AND REPAIR/ REPLACEMENT OF FIXTURE AND FITTINGS, DBS AND CABLES ETC, AT OFFICE COMPLEX, DSC LINE, DSC QUA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting fans etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through existing concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- a). One light point controlled by one 05 Amps switch.

All as per item No. 2 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 2 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 2 above but One socket out multi pin 5 Amps controlled by one switch on same board.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- a). One light point controlled by one 05 Amps switch.

All as per item No. 6 above but One light point controlled by Two Nos of 2 way switch 05 Amps.

All as per item No. 6 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 6 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 6 above but One socket out multi pin 5 Amps controlled by one switch on same board.

All as per item No. 6 above but One calling bell controlled by one bell push

All as per item No 6 here in before but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4.0 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

All as per item No 6 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including rigid PVC conduit/ Casing caping on wall/ceiling with and including provision of MS box of suitable size with 3mm thick laminated hylam sheet cover for housing switch, socket, etc incl provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dolly for following:- a). One light point controlled by one 05 Amps switch.

All as per item No. 14 above but One light point controlled by Two Nos of 2 way switch 05 Amps.

All as per item No. 14 above but One fan/Exhaust fan point controlled by one switch.

All as per item No. 14 above but One socket out multi pin 5 Amps controlled by one switch on independant board.

All as per item No. 14 above but One socket out multi pin 5 Amps controlled by one switch on same board.

All as per item No. 14 above but One calling bell controlled by one bell push

All as per item No 14 here in before but for one socket out let 2 in 1, 5 and 15 Amps or AC point with 4 Sqmm PVC copper conductor and provn of 4.0 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

All as per item No 14 here in before but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor.

M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n . exc 10 cm girth

All as per item No. 22 above but exc 10 cm but not exc 20 cms girth

S & F in repair switch piano 5 Amps one way

S & F switch piano 5 Amps two way

S & F ceiling rose 2 to 3 terminal backelite

Supply and fix bell push 250V,6 amps

S & F socket 6 Amps multi purpose flush type

S & F socket 2 in one, 5 and 15 Amps flush type

S & F Switch 15 Amps flush type

Supply and fix call bell ding dong type.

Supply and fix regulator electronic type 100 watts 5 step huming free operation

S&F modular switch piano flush type 6 Amp single pole one way, one module

S&F modular switch one way , flush type 15 Amp 240 volt complete, one module

S&F modular socket out let 3 Pin 6 Amp, flush type 240 Volt complete, 2 module

S&F Modular socket out let 2 in 1 , 3 pin 5 & 15 Amp , 240 volt, 2 module

S & F Modular bell push

S & F Angle holder PVC batten type suitable for 240 V 50 Hz AC supply

S& F modular Electronic ceiling fan regulator, 120 W , 2 module step type

S & F modular white cover plate with frame 1 module

S & F Modular white cover plate with frame 3 module

S & F Modular white cover plate with frame 4 module

S & F Modular white cover plate with frame 8module

S & F modular metal flush box 1 module

S & F modular metal flush box 3 module

S & F modular metal flush box 4 module

S & F modular metal flush box 8 module, Note : for item No. 24 to 39 Make shall be Anchor/Cona/Leader

S & F in replacement Industrial socket single pole and enclosure with a two pin and earth plug complete with one single pole MCB 20A

S & F rigid non metalic PVC conduit/ casing caping inclusive fixing accessories for fixing on wall/ceiling/beam of 20mm size

S & F rigid non metalic PVC conduit/ casing and caping inclusive of fixing accessories for fixing on wall/ ceiling of 25mm size

Supply and fix in replcement MCB DB double door type single phase with common eath and neutral bus and 200 amps copper bus bars complet , 240 volts ,08 way

All as per item No. 51 above but of 4 way

All as per item No. 51 above but MCB DB double door of 12 way

Supply and fixing in repair TPN DB's 8 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming. Make : ABB/Legrand/Indo Asian/L&T

All as per item No. 54 above but of 4 way and suitable for housing of 100 A/63 A MCCB as main incoming Make : ABB/Legrand/Indo Asian/L&T

S & F MCCB 125 Amps capacity, 4 pole, 16 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and directed. Make : ABB/Legrand/Indo Asian/L&T

All as per item No. 56 above but capacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 16 KA suitable to be fixed in 4 way TPN DB complete all as specified and directed. Make : ABB/Legrand/Indo Asian/L&T

S & F MCB SP 6-32 Amps, 10 KA, 'C' series.

S & F MCB SP 63 Amps, 10 KA, 'C' Series

S & F MCB SPN 63 Amps, 10 KA, 'C' Series

S & F MCB SP 40 Amps, , 10 KA, 'C' Series

S & F MCB SPN 40 Amps, , 10 KA, 'C' Series

Supply and fix in replacement MCB TPN 10 KA 415V, of capacity 63 amps C series Make : ABB/Legrand/Indo Asian/L&T

Taking down old unserviceable aluminium sub main wiring and S & F sub main wiring for circuit of size 10 sq mm 2 core alongwith earth wire of 10 sq mm single core of FRLS PVC insulated unsheathed cable (FR), 1100 volts grade with multistranded copper conductor, conforming to IS-649, 1100 V grade and drawn through and including PVC non metalic rigid conduit/casing of suitable size and conduit/casing accessories run on surface of wall/ceiling etc and connecting terminal ends of suitable size complete all as specified and directed by Engr-in-Charge.

All as per item No. 64 above but with wire 6 sq mm 2 core with 6 sq mm single core as earth continuity

All as per item No, 64 above but with wire 2.5 sq mm 2 core with 2.5 sq mm single core as earth continuity.

All as per item No. 64 above but with wire 4 sq mm 2 core with 4 sq mm single core as earth continuity.

Taking down old unserviceable aluminium sub main wiring, material and labour for sub main wiring complete with 4 runs of 10 sqmm PVC insulated and unsheathed cable with multi stranded copper conductor, conforming to IS-649, 1100 V grade (FR) and drawn through and including PVC non metalic rigid conduit of suitable size and conduit accessories run on surface of wall/ceiling etc and connecting terminal ends including 2 run of 10 sqmm PVC insulated un-sheathed copper conductor cable green colour as contineous earth continuity conductor and connecting to earth dolly complete all as directed.

M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 25x 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 40 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I wire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

M & L earth continuity conductor or main earthing lead fixed to wall or battens or recess or chases or buried in ground in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of 4 mm dia size GI wire

All as per item No. 71 above but of size 25x4 mm Gi strip

S & F in replacement switch piano flush type one way 5 Amps Make : Anchor/Cona/Leader

Supply and fix in replacement and fix ceiling rose three terminal Make : Anchor/Cona/Leader

S & F in replacement socket outlet 2 in 1, 3 pin, 5 Amps Make : Anchor/Cona/Leader

S&F in replacement socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type. Make : Anchor/Cona/Leader

S&F switch piano, flush ype single pole 15 Amps Make : Anchor/Cona/Leader

Supply and fixing in repair Industrial channel light fitting (4') 39 watts, 5700 K, suitable for surface mounted complete all as specified and directed. Cat No. LE10-491XXX-57XX, Make : Wipro or equivalent in Bajaj or Havells.

Supply and fix in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and fixing in replacement electric bell, AC, 230 V, Single pole, multi music type Make : Anchor/Cona/Leader

Supply and fixing in repair bell push flush type 5 Amps Make : Anchor/Cona/Leader

Supply and fixing in repair fan regulator electronic stepped flush type 100 watts, AC 240 Volts complete. Make : Anchor/Cona/Leader

M & L for plain cement concrete 1:4:8 type B-1 using 20mm graded stone aggregate for foundation and road cutting etc, including necessary form work finishing even and smooth without using extra cement, all as specified and directed.

Supply and fix in repair LED roadway luminaire 25 watts with high power, energy saving and environment friendly long life versatile pressure die cast aluminium IP66 with arcylic cover suitale for pole dia 43 mm max complete all as specified and directed by Engr-in-charge. Cat No. LTESSI25WLED of Make : C&S, Cat No : VILUMINA SL25W LED757SASYBOPC of Make Havells, Cat No. LR02-291-XXX-57-XX of Make : Wipro. Note : Rate quoted by the contractor deemed to be included any addition/alteration of existing brackets suitable for fixing of light fittings and provision of three core twisted wire 0.75 sq mm from light fittings to ceiling rose as and where required complete all as directed by Engr-in-charge.

Supply and fix in repair pole/building LED flood light 100 Watts complete with sitable clamps nut bolts etc of suitable sizes incl wiring from pole box to Ftg, Cat No. LTEF100WHPLED, Make : C&S, Cat No. JETA STURDY FL100W LED757SSYMLTG of Make : Havells and Cat No. LF-19-931-60-57-XX, Make : Wipro

Supply and fixing in repair LED street light 90 Watts, 5700 (K), suitable for primary roads, pressure die cast IP 66 LED complete with suitable size GI pipe medium grade suitable for mounting complete with suitable size of MS clamps, nuts and bolts, PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) etc. complete all as specified and directed. Cat No. LR02-781-XXX-57-G2, Make : Wipro, Cat No. LTESS90WLED/LS, Make : C&S, Cat No : ENDURACITY LINERNEO SL90W LED757PASYBOTG of make : Havells,

Supply and fixing in repair LED 36 watts suitable for armstrong/Grid ceiling of size (600 x 600) mm complete connecting to existing ceiling rose with three core flexible wire 0.5 sq mm complete all as specified and directed. Cat No. CRC010R033HP57UGR of make Wipro, Cat No. LTCRP36WLED2X2 of Make : C&S, Cat No. CAT NO : PLANO 2X2 PLR36WLED857S of Make Havells

Supply and fixing in repair LED bollard fitting 8w/9w complete with suitable size of nuts/bolts for fixing arrangement and provision of suitable size PCC foundation for fixing of bollard fitting etc complete all as specified and direction by Engr-in-charge. Cat No. LTGLC9WLED of Make : C&S, Cat No. CONEBL 8WLED857 SSYMTOPC of Make : havells or equivalent in Wipro

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed. LTDC1220WLED/WD ( LTDC161820WLED + LT4F20WLEDT8/WD) of Make : C&S, Cat No. (REGAL BATTENT8U PTO 1X22 WDSBWH + 1213T8 DSTL20W LED 865SGLASS) of Make : Havells.or Cat No. LL20-221-XXX-65NE3 in Wipro

Supply and fixing in repair LED post top 25 watts, 5700 (k), complete with suitable size of GI pipe suitable size of required length duly grouted in existing locations including , PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) complete all as specified and directed. Cat No. CORAL PT25W LED757PSYMTOPC of Make Havells, Cat No. LP07-431-XXX-57-CL of Make : Wipro, or equivalent in C&S

Taking down existing fluorescent tube light fitting of any type/any capacity and refixing the same after carry out repairs such as replacement of existing tube rods with LED tube, by pass arrangement of choke etc and replacement of flexible copper three twin core of size 23/0.0076 mm from ceiling rose to connector all as directed by Engr-in-Charge. Note :- LED tube rods will be measured and paid separately.

Supply & fix in replacement only LED tube rods 20 watts in existing conventional fittings with by pass the existing electronic/copper ballasts complete all as specified and directed. Cat No. 1213T8 DSTL20W LED 865SGLASS of Make : Havells, Cat No. LT4F20WLEDT8/WD of make C&S or Cat No. LL13-181-65SESL of make Wipro

Supply and fixing in repair LED batten 9w with polycarbonate housing and integrated electronic driver complete all as specified and directed. Cat No. LUMILIN EBS9W LED830 SPCWH of Make : Havells, Cat No. LTDC01210WLED/WD of make C&S. or equivalent in Wipro

S&F LED bulb of 9 watt, 240 V 50 Hz. Make shall be Wipro/ Philips/ Crompton

Supply and fix LED invertor bulb 9 watt, 240 V 50 Hz of make Wipro/Philips / Blaze

Supply only bearing make SKF suitable for ceiling/ exhaust/ air circulating fan of the size 6201

All as per item No 96 above but for size 6202

All as per item No 96 above but for size 6203

All as per item No 96 above but for size 6204

Supply and fix in replacement condensor 2.5 MFD ISI marked suiatble for ceiling fan 1200 mm sweep

Supply and fix in replacement condensor 4 MFD ISI marked suiatble for ceiling fan 1200 mm sweep

Supply and fix in repair LED Highbay light 80 W with pressure die cast aluminium housing, complete with all accessories. Cat No LTEF80WHPLED BAYLIGHT of make C&S, Cat No. BAYBRITE FLAREHB 80WLED857SW BBOLTG of make Havells or equivalent in Wipro

Supply and fix in replacement ceiling fan 1200 mm sweep complete with down rod canopy and blades of size 1200 mm sweep,Energy efficient, 5 star rated make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Exhaust fan 300 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Exhaust fan 380 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix Loop in box sintex model GSJB2014 complete with 4 way haevy duty connector 1 No and MCB SP 6 Amp B series 10 KA with din rail mounting complete fixed to poles / wall with clamps nuts bolts etc

M & L for taking town carefully storage type water heater (Geyser) vertical/horizontal type of any capacity and kept aside for necessary repairs at work shop and refix the same in its original postion after carry out repairs as directed by Engr-in-charge.

M & L for opening of geyser assembly and replacement of heating element of (1.5/2 KW), ISI marked to match with the existing including necessary electrical connection etc complete all as specified and directed by Engr-in-charge.

M & L for replacement of thermostat, ISI marked to match with the existing including necessary electrical connection etc complete all as specified and directed by Engr-in-charg.

M & L for opening of geyser assembly and taking out u/s glass wool, taking down carefully water storage drum and made repair, attesting leakage of storage drum by means of brazing and refix the same and filling the new glass wool/insulating material complete testing after carry out repairs all as specified and directed by Engr-in-charge.

S&F stop cock cast copper alloy screwed down high pressure of size 15mm dia.

S&F PVC flexible pipe 12mm dia and 450mm long heavy duty with both ends steel check nut to fixed on 15mm dia GI pipe for cold/Hot water.

Taking down ceiling fan and repairing of fan of any make, 1200 mm/1400 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete.

Taking down Exhaust fan and repairing of Exhaust fan of any make 300 mm sweep dismantling its parts cleaning properly rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, cleaning of fan body and its blade by cleaning agent assembling and testing after fixing of fan blades, refixing at site and connecting complete.

Taking down Exhaust fan and repairing of exhaust fan of any make 380 mm sweep dismantling its parts, cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing, replacing petti items such as split pins, cleaning of fan body and its blade by cleaning agent assembling and testing after fixing of fan blades refixing at site and connecting complete.

supply and fix in replacement high efficeiency mid bay luminaire fitting model LH09-192-060-50-V5 of wipro or equivalent in Philips/ Havells

Supply and fix in replacement Exhaust fan 450 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj ( Old fans will be deposited to factory authorities)

Supply and fix in replacement Air circulators 600 mm sweep complete with ,Energy efficient, 5 star rated make Havells. / crompton / Bajaj ( Old Wall fans will be deposited to factory authorities)

S& F Change over switch disconnector of rated capacity 63 Amp, 415 V, AC, 4 pole, make L&T or its equivalent

Supply and laying and testing cable in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core.

All as per item No. 120 but of size 50 sqmm 3.5 core

Supply and laying and testing cable in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 4 core.

All as per item No. 122 but of size 10 sqmm 2 core

All as per item No. 120 but of size 6 sq mm 2 core

Excavation in trenches in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for pipes and getting out complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.

Supply and lay well burnt brick class B as protection to cable in cable trenches all as specified and directed

Demolition of cement concrete of any description for laying of pipes / cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : providing PCC work will be measured and paid seperately under relevant items.

M&L for MS works for cross arms bracing support clamps and back plate fabricated from structural section and including nut, bolt and washer bending hot or cold drilling holes for bolt of any size and painting with two coat of aluminium paint over one coat of red oxide primer including prearation of surfaces complete all as specified and directed

M&L for taking out cooler grill body of existing desert cooler, of any side of cooler body and S&F of newly desert cooler grill made up of iron body of thickness 1.6mm complete with cooling pads and fixing it in the existing body all as specified and directed

M & L for GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and as directed for the following sizes:- a) 40 mm dia bore

All as per item No. 134 above but of size 50 mm bore

M & L for PCC 1:2:4 type B1 ( with 20 mm graded stone agrregate) in foundation and filling in road cut surfaces

S & F cable jointing kit 1100 V grade cable for straight through joint complete with jointing material and accessories suitable for 4 core XLPE Armoured aluminium conductor cable of size upto 50 Sqmm 3.5 core

Taking down of RO filter unit of capacity 15LPH, and repair/ replacement of carbon and sediment filter cartridge and refixing the same at its original location after carrying out necessary service work for smooth running of RO unit complete all as specified and directed by Engr-in-charge

Taking down of RO filter unit of capacity 20 LPH, and repair/ replacement of carbon and sediment filter cartridge and refixing the same at its original location after carrying out necessary service work for smooth running of RO unit complete all as specified and directed by Engr-in-charge

IMPEX TRADERS

S.D.TRADERS

Manoj Electricals