REPAIR, REPLACEMENT OF TILES FLOOR, WALL, PLASTERING, PLUMBING FITTING, JOINERY AND REPAIR TO TOILET, KITCHEN IN CERTAIN MD , OTM ACCN UNDER AGE BR-I OF GE(AF) ADM AREA AT AF STN AGRA.

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed.

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces concrete surface of ceiling in cement mortar 1:3 including dubbing coat required at site, finished even & smooth (without using extra cement) complete all as specified and directed.

M&L two coats of distemper oil emulsion on newely plastered wall surfaces including preparation and 3mm thick wall care putty complete all as specified and directed.

M&L for preperation of newly plastered wall surface & applying three coat of white wash on wall surface complete all as specified & directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Demolition of PCC in ground floors & pavings not exc. 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.50 mm graded stone agg) as in flooring finished even & smooth without using extra cement, complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone agg) as leveling course, complete all as specified & directed.

M&L for glazed ceramic designed coloured tiles 300 x 450 mm x 7 mm/ 450 x 350x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M & L for vitrified colour tiles of 10mm thick first quality (square / rectangular) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM 1:6, including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 15mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed and including dismentling of existing stones.

Taking down door shutter and re-fixing in same opening after necessary alteration to door shutter of size exc 1 sqm and not exc 2 sqm complete all as specified and directed.

Use and waste formwork fair finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L TMT bar 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and directed.

M&L for RCC (nominal mix) type B-1 (1:2:4) using 20 mm graded stone aggregate as in shelves supported on walls etc complete all as specified and directed and including demolition of existing RCC complete all as specified and directed.

M&L for cement concrete type E-2 (1:5:10) (using 40mm thick graded stone aggregates) as in foundations, sunken portion filling and mass-concrete including demolition of existing PCC complete all as specified and directed..

M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in sunken floor for correction of slope/levelling etc complete all as specified and directed.

M & L for rendering wall, floor as in sunken portion 15 mm thick in two layers of 10 + 5 mm in CM 1:6 mixed with Pidi Proof 101 LW(+) of Dr.Fixit (Pidilite) or equivalent integral water proofing admixture @ 200 ml/bag of cement over two coats of super latex 302 of Dr fixit (Pidilite) or equivalant in the ratio (1:4:7) ( One part super latex, 4 part water and 7 part of cement) @ 1.5 Kg of homogenious mixture/Sqm in two coats and finish the surface even and smooth (without using extra cement) complete all as specified and directed. Note : Pidi proof and super latex to be measured and paid seperately as supply only

Supply only Pidi proof 101 LW (+) of Dr Fixit (Pidilite) or equivalent of make Latex/CICO No. 1/Fosroc (India) ltd complete all as specified and directed.

Supply only super latex 302 of Dr Fixit (Pidilite) or equivalent of make Latex/CICO No 1/ Fosroc (India) Ltd complete all as specified and directed.

M&L for cutting holes into or through cement concrete slabs, chajjas, etc. of superfacial area n exc 100 Sqcm for inserting pipe in sunken floor portion to facilitate drainage including packing with PCC 1:3:6 and making good to match existing surface complete all as specified and directed.

S&F 50 mm GI pipe, medium grade in isolated length of 400 mm long inserted in to wall surface as in water drainage spout complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings including cutting chases of wall wherever required and making good the surface to match the existing or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings including cutting chases of wall wherever required and making good the surface to match the existing or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.

M&L for 15 mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe for concealed pipe lines in walls and including taking down of existing GI pipe complete all as specified and directed. (Note : The rates for pipes in RM including short lengths, with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls etc..) and cutting chases, pinning in, brick walls and making good to facing where required and pointing in CM (1:3) to ends or edges and making good cutting not exc 10 cm girth

S&F in repairs plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 900mm X 750mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern complete all as specified and directed.

S&F in repair stainles steel sink with draining board made out of stainless steel 1.00mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm incl waste pipe etc complete all as specified and directed.

S&F in repair PVC 32/40mm dia flexible waste pipe 800mm long with socket fixed with sink/Wash basin waste coupling complete all as specified and directed.

S&F in repair Bip tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms) complete all as specified and directed.

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm angle stop value chromium plated fancy type complete all as specified and as directed.

S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S & F in repairs vitreous china wash down water closet ( pedestal pattern), white, including PVC seat cover white with hinging device etc complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F in repair wash hand basin vitreous china wash basin white flat back size 550x400 mm including supplied and fixed angle iron brakets errecting stand, CP waste coupling, waste pipe complete all as specified and directed.

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed.

S&F Waste fittings 40mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed.

S&F in repair CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Chromium plated Towel rail 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

S&F in repairs 100mm dia stainless steel gratings complete all as specified and directed.

S&F in repair Plastic water closet seat, white ISI Marked, closed pattern with flat bottom and cover and mild steel chromium plated hinges device complete all as specified and directed.

S&F in repair PVC health facet suitable for Europian western commode (EWC) including PVC connection 15mm size with PTMT nuts and washer, of length 900mm complete all as specified and directed.

S&F in repair 15 mm CP wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe complete all as specified and directed.

S&F in repair CP wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, oval shaped of size 100 x 50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.

S&F in repair tripple layer white rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) including dismantling of existing water tanks complete all as specified and directed.

S&F sheet glass corner self of 3 tier assembly consisting of 5.5mm thick sheet glass self 15cm radius with chromium plated bracket guard and rail and fixed with CP screws and wood cleats with wall complete all as specified and directed.

S&F in repairs Toilet paper holder, with flat recessed type stainless steel complete all as specified and directed.

S & F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm with tinned tacks or galvanised wire staples windows complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm with tinned tacks or galvanised wire staples windows complete all as specified and directed.

M&L for dismentling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for 7mm thick designer PVC hollow plank ceiling including aluminium section grid work with hanging arrangement to roofing shed and connecting and perimeter beading all as per manufacturer specification and making holes for providing fancy light fitting complete all as specified and directed (Note : Pattern of design will be decided by GE)

M&L for anodised aluminium snap grid size 605mmx605mm frame work for false ceiling all as specified complete all as specified and directed.

M&L for 6 mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) not exc 1.5 sqm complete all as specified and directed.

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

S&F solid WPC door frames of size 100mm x 50 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F for factory made fully glazed/ wire gauge (single/double piece) both side PVC prelam door shutter 33-35 mm thick (Style) consisiting of frame made out of mild steel tubes of size 19mmx 19mm (19 gauge) for top and bottom rails and 19mmx19mm (19mm gauge)in styles. Single pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails. PVC sheet strip of 20 mm width stuck inside with solvent cement for styles & plain coloured PVC Sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail. Panel will be wire gauged and tighten firmly and fitted as per manufacturers instructions including stainless steel wire cloth, 0.25 to 0.36 mm nominal dia of wire and average width of aperature 1.4 mm to 2.0 mm and Aluminium XPM in rhombus shape in one peice from top rail to bottom rail complete all as specified and directed. Note : All screws shall be self tapping chrome plated.

S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board/kitchen cabinets front shutters complete fixed in position in all respect complete all as specified and directed.

S&F figured glass 3.0mm thick, pin head type & glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel hinges of 100mm size for for PVC door shutter complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F Stainless steel tower bolt of 100mm size for kitchen cabinet and bed room cupboard shutter complete all as specified and directed.

S&F Stainless steel handle of 100mm size for kitchen cabinet and bed room cupboard shutter complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) is 30 mm complete all as specified and as directed.

S&F Stainless steel hasp & staple for 100 mm size size for kitchen cabinet/ bed room cupboard shutter complete all as specified and directed.

S&F auto closing hinges 35mm of O crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutter complete all as specified and directed.

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall including taking down of existing rain water pipe incl fittings complete all as specified and directed.

S&F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall including taking down of existing rain water pipe incl fittings complete all as specified and directed.

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor including taking down of existing pipe incl fittings complete all as specified and directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair PVC floor trap 125/110mm dia including jointing to waster pipe fixed in cement conccrete type- B1 (1:2:4) complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) branch piece single (Single Y) equal or unequal any radius complete all as specified and directed.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.

S&F steel tank cover with zink coating, dia of cover 500 mm and height 150mm of cut spherical shape and gas welded of spikes 2mm dia and 50mm length at 50mm c/c both bay in zig zag motion with ms hinges, hasp and staple fixed to existing PVC water water starage tank of any capacity and binded with barbed wire 2mm dia and 2.24mm barbs 75mm c/c all around of tank including dismantling of old pvc water tank cover complete all as specified and as directed.

Sethi Brothers (BID ID -3070915)

deva engineers (BID ID -3061283)

GIRENDRA SINGH AND CO (BID ID -3061430)

C P Singh and Co (BID ID -3070956)

rohan traders (BID ID -3070541)

M/s M S Sharma and Co. (BID ID -3061836)

Sukaba Enterprises (BID ID -3059977)

BUILDTECH ASSOCIATES (BID ID -3059708)

M/S SINGH ELECTRIC CO (BID ID -3061697)