Construction of DSP camp office cum Residence with development works at Cuddalore New Town in Cuddalore District under announcement made by Honble Chief Minister during the Police demand held on 20.04.2023

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

WATER SUPPLY ARRANGEMENTS 51.2: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

51.3: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 2000 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

Electrical arrangements 72 : Box type Fibre Fan hook

73.1 : 6 way - D.B

74 : Charges for fixing of "Fan"

77.3 : S&F of TV/Telephone line Socket of size 8" x 6" x 4"

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112 : S & F of Exhaust Fan 300 mm dia

238 : Anticorrosive treatment for steel grills

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.9.1 : PCC 1:3:6 for foundation & basement using 40mm metal (using crushed stone sand)

6.5.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor Floor

c) In First Floor.

d) In Second Floor.

9.5.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

10.5.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.5.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First floor

15.1.1: Cuddappa slab 20 mm tk.for C/B slab. (using crushed stone sand) a. In Ground floor

b. In First floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

f.Curved surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2100mm (Single Leaf)

b) Door size 900mm x 2100mm (Single Leaf)

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws a. 900 x 2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) including plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(using PVC insulated binding wire)

44.2.1.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M30) a). Providing pit

b) Augering 30cm dia

44.6.1 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe (UPVC special clamp)

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.1.1 : PVC Water supply (ASTM) with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.4.1 : 20mm dia PVC water supply ASTM pipe with UPVC Specials (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (using PVC Box, Fire retardant Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (using PVC Box, Fire retardant Box)

66.1.1: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (using PVC Box, Fire retardant Box)

67.1.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself. (using PVC Box, Fire retardant Box)

68.2.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (using PVC Box, Fire retardant Box)

69.1.1: 15 Amp. Power plug (using PVC Box, Fire retardant Box)

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.8 : Run of 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1: S & F of 450 x 375 x 20mm thick TW plank

85.1 : Supply of G.I pipe 40mm dia 'B' Class

87.1: Supplying and delivery of Three phase ELCB/RCCB

98.3.1 : TW panelled door shutter (with brass fittings) a. 1000 x 2100mm.(single leaf)

b. 1200 x 2100mm.(single leaf)

98.3.2 : TW Double leaves panelled door shutter (with brass fittings) a. 1500 x 2100mm.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

238.1 : Anticorrosive treatment for window grills

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.4.2.1: S&F of Granite slab of size 4'x2', 18 to 20mm thick (Satharlic / steel grey, Ruby red) (Super fine polished with machine cut edges) (using crushed stone sand)

384 : S&F of PVC flushing cistern 10 litres capacity

448.2: Supply and fixing 32mm dia PVC Tee with end cap

ANNEXURE - II A1: Providng one coat of Wallputty for new plastered surface

A2: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations.

A3: Supplying and fixing of stainless steel sink 600mm x 450mm x 200mm including cost of all materials and labour charges for fixing etc., all complete.

A4: Supply and fixing of PVC Trims (beeding) etc., all complete and as directed by the departmental officers.

A5: Supplying and fixing of CP Angle valve Stop cock including cost of all materials and all labour charges etc complete.,

A6: Supplying and fixing of shower arm 9" with required specials and labours for fixing etc., all complete.

A7: Supplying and fixing of SS Soap Tray including cost of all materials and all labour charges etc., all complete.

A8: Supply and fixing of APP membrance : Basic cleaning of the surfaces to remove dirt, dust, lose particles, providing and supplying a single coat of tar felt liquid membrane completing as per standard procedure and water proofing test etc., all complete and as directed by the departmental officers

A9: Supply and fixing of Stainless Steel Health Faucet approved quality with ISI mark including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

A10: Supply and fixing of 6 way TPMCB DB with Metal Door Cover with IP 42 Protection higher end with 1 No. of 100A 4 pole Isolator MCB as incoming and 18 Nos. of 6A to 32A SP MCB as outgoing including cost of all materials and labour charges etc. all complete and as directed by the departmental officers.

A11: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators

A12: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

A13: Supplying and fixing of SFRC manhole Cover with frame of following size with locking arrangements including of all cost etc., all complete and as directed by the departmental officers. a) 600mm x 600mm

b) 300mm x 300mm

A14: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A15: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A16: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A17: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A18: Providing single nosing to the edges of granite slab of 18 to 20 mm thick including required tools and plants etc., all complete.

A19: Supplying & fixing of Aluminium Dye casting letters with approved Coloured powder coated finishing matt for fixing in position cost and conveyance of all materials. a) 9" height letters

b) 15" height TNPHC Emblem

A20: Supplying & fixing Foam name plate (Acrylic) with stickers of size 24" x 4" and 3mm thick with lettering for identifing the rooms including cost of materials

A21: Supply and fixing of 24"x 8" and 3mm thick plastic foam name plate (Acrylic) with vinyl cutting letters RWH Board with approved colour etc.

A22: Supplying & fixing of 6 lever navtal lock with 2 keys ISI mark etc

A23: Supply and fixing of Hydraulic Door Closer of various sizes of approved quality including cost of all materials and labour charges for fixing ect., all complete.

A24: Supplying & fixing of lucky snow white plastic gate light fitting incl. cost of material and fixing charges etc., all complete and as directed by the departmental officers.

A25: S & F of hard drawn copper (Panel board conductor gauge)

A26: RCC surface putty 3mm tk in Ground floor

A27: Supplying and laying of 3.5 core 50 sq.mm PVC armoured LTUG cable (below GL)

A28: Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. a) 3.5 x 50 sqmm LTUG cable

A29: Supply and fixing of brass cable gland for PVC armoured LTUG cable for following sizes with earth connection a) 3.5 x 50 sqmm aluminium cable

A30: Supplying and laying of following dia GI pipe 'B' class with ISI mark for above ground level a) 80mm dia GI pipe 'B' Class

A31: Supplying and laying of following GI pipe B class with ISI mark (Below Ground Level) a) 80mm dia GI pipe 'B' class

A32: Supplying and fixing 3 Nos 100 Amps 500 volts grade/ well porcelin fuse unit on suitable teak wood plank

A33: Supply & fixing of 100 Amps triple pole main switch for incoming control and 2 no of 16 A etc., complete and as directed by the departmental officers

A34: Supply and fixing of LED flood lamp fitting 250 watts etc., with single piece dia cast aluminium housting and lamp etc., complete.

A35: Supply and erection of 200Amps capacity 440V 50Hz floor mounting LT panel board (Cubical type) with bus bar chamber made up of 14/16 SWG CRCA sheet with bus bar chamber etc., all complete and as directed by the departmental officers. For Power panel board

A36: Supplying and fixing of CP Wall Mixture Tap 3 in 1 system with Hand Showers

A37: Supplying and fixing 6 A to 20 A, 32 A single pole miniature circuit breaker (MCB)

A38: Supply and delivery of 3 HP Open well Submersible pump set (Duty 100X50lpm)

A39: Supply & fixing of Panel board for 3 HP Open well submersible motor with two level guard auto start with ISI mark

A40: Labour charges for erection of submersible pumpset in borewell / Sump / openwell etc., all complete. a) Up to 5 HP

A41: Supplying and laying of following dia GI pipe 'B' class with ISI mark for above ground level a) 50mm dia GI pipe 'B' Class

A42: Supplying, delivery, laying and fixing of following dia GM/PVC/GI specials including cost of pipe and specials with ISI mark of best quality conforming to IS Specification. a) 80mm dia GI Bend

b) 80mm dia GI Elbow

c) 80mm dia GI Hex Nipple

d) 80mm dia GI union

e) 80mm dia Non return valve

f) 80mm dia GI flange set

g) 80x50mm dia GI reducer

h) 50mm dia GI Elbow

i) 50mmm dia GI union

j) 50mm dia GI bend

k) 50mm dia GI Tee

l) 50mm dia GI coupling

m) 50mm dia GI MTA

n) 50mm dia GI Hex Nipple

o) 50mm dia Gun Metal Gate valve

p) 32mm dia Gun Metal Gate valve

A43: Supplying, laying, fixing and jointing the 40mm dia UPVC column pipe Below G.L

A44: Supplying and delivery of following dia UPVC specials of best and approved quality having ISI mark etc., all complete. a) 40mm dia UPVC Ball valve

b) 32mm dia UPVC Ball value

c) 25mm dia UPVC Ball valve

d) 40mm x 32mm dia PVC reducer

e) 32mm x 25mm dia PVC reducer

A45: Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

A46: Supplying and fixing of Teak Wood wrought and put up for frames of doors,including cost of 8mm Thk Sand blasted Glass, Ornamental Design beadings,6" Brass Hinges, 8" Brass Handle,8" Tower Bolt, Brass aldrop, Brass Door topper including the cost of Melamine polish with necessary plugs, rebates for shutters, plaster grooves on all faces etc., including labour charges for fixing hold fasts, complying with relevant standard specifications etc., all complete and as directed by the departmental officers.

A47: Supplying and fixing of 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling

A48: Providing Cornice Work for Gyp Board False Ceiling

A49: Supply, delivery & fixing of Split type Air conditioner 1.5 Ton with 5KVA Capcity automatic votage stablizer , 2HW, 180A, 5 Star with 10 feet of copper tube Etc., with 20mm dia pvc pipe 5m long etc., all complete and as directed by the departmental Officer.

A50: Supply and fixing of MS stand for fixing outdoor unit, including cost of all materials etc., all complete and as directed by the departmental Officers.

A51: Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED INDOOR FITTINGS (LIGHT EMITTING DIODE) LOWER END etc., all complete and as directed by the departmental Officers.

A52: Providing Ordinary Vertical blinds for windows, including cost of materials and labour charges etc., all complete.

A53: Supply, erection, Testing and commissioning of 62.5 KVA AMF Panel generator set.Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

A54: Supplying and laying of 3.5 core 25 sq.mm PVC armoured LTUG cable (below GL)

A55: Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. a) 3.5 x 25 sqmm LTUG cable

A56: Supply and fixing of brass cable gland for PVC armoured LTUG cable for following sizes with earth connection a) 3.5 x 25 sqmm aluminium cable

A57: Supplying and laying of following GI pipe B class with ISI mark (Below Ground Level) a) 50mm dia GI pipe 'B' class

A58: Fabricating Supplying sectioning of PPGI sheet for the specifications. The materials should be PPGI file profile with a blue colour or any other approved design 0.56mm thick 24 gauge having width 1050mm

A59: Supplying of 4 core 1.5 Sq.mm Copper cable including the cost of material and loading unloding & transportation charges etc,

Britto Dhanasekaran

BHARATH BUILDING CONSTRUCTION