Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.9 LAccepted-AOC 27 WESTERN STREET ROOM NO 307 KOLKATA 700012 WEST BENGAL | KOLKATA | KOLKATA | WEST BENGAL | 700012 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹39.6 L+₹1.2 L (3.12%)Rejected-Finance 23 A H4 DAIMOND HARBOUR ROAD NEW ALIPORE KOLKATA 700 053 WB | KOLKATA | KOLKATA | WEST BENGAL | 700053 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹39.9 L+₹1.5 L (4.02%)Rejected-Finance 15 JOGENDRA NATH GHOSAL ROAD P S BELGARIA KOLKATA 700 057 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700057 | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹40.0 L+₹1.6 L (4.23%)Rejected-Finance 33 1 1 GOALAPARA ROAD P O AUTHPUR DIST NORTH 24 PARGANAS KOLKATA 743128 WB | KOLKATA | NORTH 24 PARGANAS | WB | 743128 | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹40.4 L+₹2.0 L (5.28%)Rejected-Finance P 21 MANAS BAG KOLKATA 700 056 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
31 Jul 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
ADDN ALTN IN BLDG NO P 57 AND P 58 AT BAGJOLA MIL CAMP UNDER GE NORTH KOLKATA
2023_MES_608556_1
8250/23-24/GE(N)/KOL/E8 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
BAGJOLA
AS PER TENDERDOCUMENT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹77,600
Yes
25 Aug 2023
10 Jul 2023
1 Aug 2023
11 Jul 2023
31 Jul 2023
24 Jul 2023
Amount
Taking down Chowkhats or frames n exc 1.5 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
S&F powder coated anodised aluminium glazed or gauged shutter for sliding windows (2, 3 & 4 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel, including all necessary fittings such as roller, jointing cleats, glazing clips, rubber packing aluminium screws as required complete all as specified and directed.
S&F powder coated anodised aluminium glass louver/ ventilators with blades of 10mm heavy duty with lever handle complete all as specified and directed.
S&F powder coated anodised aluminium frame for cubical partitions, doors, windows, ventilators (including 2/3 tracks) with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with aluminium beads in square exceeding 0.5 Sqm in each pane for aluminium frame complete all as specified & directed.
Supply and fix 5.50 mm thick sheet glass, ordinary quality and glazing with aluminium beads in square exceeding 0.5 Sqm in each pane for aluminium frame complete all as specified & directed.
Supply and fix 4 mm thick frosted glass, ordinary quality and glazing with aluminium beads in square not exceeding 0.5 Sqm in each pane for metal frame complete all as specified & directed.
S&F in repair pre laminated particle board 12mm thick, interior grade both side decorative choice lamination fixed with screws and beading complete all as specified and directed.
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
Supply and fix 2nd class hardwood, plain, solid, straight chowkhats and frames, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, one face covered with decorative face veener with lipping/ frame to match complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F factory made solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm long butt hinge, medium weight, stainless steel complete all as specified and directed.
S&F 100mm long butt hinge, medium weight, cold rolled mild steel complete all as specified and directed.
Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
S&F rolled mild steel Fe-410-w (grade E-250), quality A, framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for preparation of new steel surface of any description exc 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
S&F in repair 25mm dia powder coated aluminium curtain rod fancy type (length from 0.90m to 1.80m) with fancy type end side brackets and fancy type hanging brackets complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate in floors complete all as specified and as directed.
Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 of each tile in floors, set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) complete as specified and directed.
Material and labour for light shade vitrified tiles 10mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 of each tile in skirting etc. set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 10mm thick rendering as backing coat in CM (1:4) complete as specified and directed.
Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors laid over 15mm thick screed bed in CM(1:6) including set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles (350x250) x7mm / 450x 350x 7 mm thick as in skirting/ dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25 mm thick laid over cement screed bed 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement bed 10mm thick in CM 1:4 as in backing coat and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (rienforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L for Reinforced Cement Concrete 1:1.5:3 (using 20 mm graded crushed stone aggregate) type A1 as in chajjas and like complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for Reinforced Cement Concrete 1:1.5:3 (using 20 mm graded crushed stone aggregate) type A1 as in lintel, beams complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Formwork to sides of lintel, roof beams and similar work for rough flat concrete surface complete all as specified and directed.
Formwork to chajjas, troughs and similar items including edges for rough flat concrete surface complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for rough finished surface complete all as specified and directed.
Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.
Material and labour for TMT bar 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.
Material and labour for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders as required complete all as specified and directed.
M&L for 5mm thick plastering in CM 1:3 on concrete surfaces as in sides of column, lintel, beams, chajja, facia, railing, RCC wardrobe etc including finishing the surface even and fair without using extra cement complete all as specified and directed.
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof, ceiling, louvers, parapet, column, beam and lintel by hammering with wooden mallets carefully chipping off the old concrete surface and necessary scaffolding if required including cutting of rusted reinforcement if so required, cleaning the surface thoroughly by using wire brush, emery paper etc including cleaning all around the reinforcement by any means as required and applying alkaline rust removing chemical including preparation of surface completely for applying bonding agent and disposal of debris to outside the premises complete all as specified and as directed.
M & L for providing single coat of epoxy bond adhesive to prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm, complete all as specified and directed. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply and application of epoxy zinc rich primer to the prepared steel surface by brush, the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. (Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply, mixing and application of two component structural grade polymer modified reinstatement mortar upto 25 mm average thickness, where local spalling has taken place or shuttering is not possible.The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction.
Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and directed.
Material and labour for rendering 15 mm thick in CM (1:6) on fair faces of brick wall or concrete surface and finished even and smooth with using extra cement complete all as specified & directed.
Material and labour for rendering 5 mm thick in CM (1:3) on concrete surface in ceiling and finished even and smooth with using extra cement complete all as specified & directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty on wall complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty on ceiling complete all as specified and as directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment on plastered surfaces of wall including washing, rubbing down and stopping of old treatment and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment on plastered surfaces of wall including washing, rubbing down and stopping of old treatment and applying 3mm thick wall care putty and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
All as per Item No 60 above but in ceiling complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.
Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof kerb etc complete all as specified and directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed.
Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately.
Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : Pibial Primer of TEXSA or equivalent product of BITUMAT/ BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based mineral finished water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 Kg mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (Note :- Cost of cutting groove to parapet wall for inserting APP membrance and filling groove with cement mortar (1:3) is deemed to be included within the quoted rate.)
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
M&L for Hardcore of gauge exc. 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floors etc. complete all as specified and directed.
Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.
Supply and fix Rotational moulded polythene water storage tank 500 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and as directed.
Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed.
Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and as directed.
Supply and fix 20mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and as directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.
Dismantling cast iron drain pipes 100mm, jointed in CM obtained either from trenches/ wall as required complete all as specified and directed.
S&F 100mm CI (sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specifed and directed.
S&F 100mm CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specifed and directed.
S&F vitreous china wash down water closet pan of padestal pattern, white, with necessary seat cover including connecting to trap and to flushing pipe etc and (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F one-pieced white wash basin with pedestal 550x400 (oval/square pan) a/w brackets or MS nuts and bolts for fixing, fixed with CP waste coupling and connecting waste pipe etc. complete all as specified and directed.
S&F waste fittings 32 mm brass, CP for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair fancy type chromium plated 15mm dia pillar taps copper alloy with capstan heads, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repairs angular stop valves fancy type chromium plated 15mm dia screwed down, high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.
S&F PVC connections 15mm size of length 600mm with PTMT nuts complete all as specified and directed.
S&F vitreous China urinals, half stall semi oval type flat back of size 710x330x450mm white coloured, including chromium plated fancy type urinal spreader with grating and union for discharge pipe and complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F health faucet (ABS body) with 8mm dia 1 metre long flexible tube and wall hook for fixing in 15mm dia pipe complete all as specified and directed.
S&F chromium plated two ways bib cock with wall flange for fixing in 15mm dia pipe complete all as specified and directed.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia pipe for low level cistern including 15mm size PVC connections with PTMT nuts and washer both side of length 600mm complete all as specified and directed.
S&F bib tap of 15mm bore fancy type, chromium plated cast copper alooy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.
S&F in repair chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.
S&F grating doom 125mm dia of PTMT (min wt 25 gms) complete all as apecified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
M&L for brickwork with brick class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth for one light point controlled by one switch complete all as specified and directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).
All as per item No 98 above but for one 3/5 pin 6 Amp Socket outlet on the same board complete all as specified and directed.
All as per item No 98 above but for one 3/5 pin 6 Amp Socket outlet on the independent board complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate).
Supply and fix modular switch 1 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and as directed.
Supply and fix modular switch 1 way, 16A, 1 module including modular white cover plate with frame complete all as specified and as directed.
Supply and fix socket 5/6 A, 2/3 pin combined 2 module including modular white cover plate with frame complete all as specified and as directed.
Supply and fix socket 15/16 A, 3/5 pin combined 2 module including modular white cover plate with frame complete all as specified and as directed.
Supply and fix fan regulator modular type 120 W, 2 module complete all as specified and as directed.
S&F sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug socket and plug top 20 Amp complete with one single pole MCB 20 Amp complete all as specified and directed.
Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.
Material and labour for sub-main wiring (Concealed type) with two run PVC insulated, unsheathed, single core, multistranded copper conductors (FRLS) of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with PVC conduit complete all as specified and as directed. (Note(i):Three run of 4.0sqmm copper conductor and One run PVC conduit shall be measured as one unit i.e RM) (ii) Cutting chases shall be measured and paid separately)
Material and labour for sub-main wiring (Concealed type) with two run PVC insulated, unsheathed, single core, multistranded copper conductors (FRLS) of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with PVC conduit complete all as specified and as directed. (Note(i):Three run of 6.0sqmm copper conductor and One run PVC conduit shall be measured as one unit i.e RM) (ii) Cutting chases shall be measured and paid separately)
Material and labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
Supply and fix TPN DB 4 way double door vertical type suitable for four pole MCCB as incomer including make good the damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.
Supply and fix MCCB 4 Pole, 415 V, 63 Amps with breaking breaking capacity 16 KA with all incoming/ outgoing connectons suitable for fixing 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified and directed.
Supply and fix in repair sheet metal enclosure SPN DBs (Double door) 12 way with 200 amps rated busbar, DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure complete all as specified as directed.
All as per item No 114 above but for 8 way SPN DB complete all as specified and directed.
All as per item No 114 above but for 4 way SPN DB complete all as specified and directed.
Supply and fix MCB single pole & neutral 32 Amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed .
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.
Supply and fix LED light fitting (ceiling) recessed/ surface mounted 600mm x 600mm 36 watt LED provided with high transmission crylic cover cieling including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed. Make - Century LED Ltd Cat No PCV036C /Surya cat no SLE DS 36 W22S/ Wipro Cat no CRCO10S036HP57G2 / Equivalent Model of Make specified in PS here-in-after.
Supply and fix LED light fitting 4 ft , 1x18 watt, 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.
Supply and fix LED light fitting 2 ft , 1x10 watt, 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.
Supply and fixing LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserceable light fitting all as specified and directed. Make:Century LED Cat no. SPSP025C/ Crompton Cat No. LSTS-25-CDL-M/ Jaguar Cat No. LCPRSRT25WXC / Equivalent model of Makes specified in PS here-in-after.
Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 220 CFM with BEE 5 star rating along with electronic regulator & operated with brushless direct current motor (BLDC) complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters 250 mm sweep, 230V, AC 50 Hz, copper winding and mounting accessories complete all as specified and directed.
Supply and fix exhaust fan 300 mm sweep metal body, 230V, AC 50 Hz, with blades frames and louvers complete all as specified and directed.
Supply and fix exhaust fan 450 mm sweep metal body, 230V, AC 50 Hz, with blades frames and louvers complete all as specified and directed.
Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.
Supply and fix 4.0mm dia GI wire as earth continuity conductor including taking down old unserviceable earth wire complete all as specified and as directed.
S&F GI pipe 15 mm bore 'light grade' galvanised for protection of earth electrode including taking down old unserviceable one complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m width or n exc 10 sqm on plan and n.exe 1.5 m in depth for taking out/laying of cable,foundation etc and getting out in soft/loose soil complete all as specified and as directed.
Returning and filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose soil complete all as specified and as directed.
Supplying, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable after taking down old unserviceable cable with stranded alluminium conductors 35 sqmm x 3.5 core,1100 Volt grade, laid in trenches ,compleate all as specified and as directed. Note :- (i) Pipe and bricks for cable protection and sand cushioning and earth work shall be measured and paid separately.
Supplying, Laying,connecting,testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable after taking down old unserviceable cable with stranded alluminium conductors 25 sqmm x 3.5 core,1100 Volt grade, laid in trenches ,compleate all as specified and as directed. Note :- (i) Pipe and bricks for cable protection and sand cushioning and earth work shall be measured and paid separately.
Supply and fix galvanised iron pipe in 50 mm bore, light grade for protection of UG cable, laid in trenches etc complete all as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.
Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and as directed. Note:- Punned depth only shall be measured and paid.
Supply and lay sub class 'B' bricks laid dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and as directed.
SETH GHANSHYAM DAS LAKHMAMI AND CO
RBS Builders
S Majumder and Construction
The Planters Engineering Corporation
SENCO
Rounaq Enterprise
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .