Maintenance of 6 Nos of Generators, Substation, lighting system of Spillway, Street lights on dam top, LBED, RBED, Dyke, Highmast lights, drainage gallery, and electrical section of Narayanpur Dam for two years.

Maintenance of 6 Nos of Generators, Substation, lighting system of Spillway, Street lights on dam top, LBED, RBED, Dyke, Highmast lights, drainage gallery, and electrical section of Narayanpur Dam for two years.

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975-240 Sqmm...

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner Seath, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975-185 Sqmm, (51 GI Wires - 3.15 mm Dia) ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff- LT Cable 120 to 240 Sqmm etc, complete with all lead and lifts ...

Supplying of 11 kV, 400 Amps Double Break GOS etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable-3.5 x 150/185 Sqmm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable-3x240 Sqmm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable-3x240 Sqmm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of PVC Insulation Tapes 19 mm wide and in rolls of 10 Mtr etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of Caution/Danger Board etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing of GOS including wiring (11 kV Double Break 400 Amps) etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing of DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing of Termination Kit etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing of pot heads for HT cable only-Heat shrinkable/Cold shrinkable/Pushon etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing Danger Board etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying and installation of Dehydrating Silicagel Breather Assembly etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of EHV Grade Transformer Oil - New etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Filling of oil to the main tank and OLTC tank, filtering the oil including filtering till attainment of prescribed BDV valves including labour, filtering equipment along with accessories etc, complete...

Supplying & fixing of PG Clamp-Rabbit to Rabbit etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying & fixing of PG Clamp Rabbit to Insulated Wire-185 Sqmm(Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018) etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying & fixing of Heavy Duty Copper Terminal Long Barrel-185 Sqmm Copper Terminal, Apprx Wt: 158 Gm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete etc, complete ...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge...

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever requir...

Finishing walls with water proofing cement paint of required shade : Old work (one coats @ 2.20 kg/10 m² complete. including preparing the surface after thoroughly cleaning the surface to remove all ...

Supplying & fixing of 11 KV metering cubicle insulators etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc, complete ...

Supplying & Laying cable trays including welding, fixing of supports Cable tray of 300 mm width

(suitable for cable duct of D type) etc, complete with all lead and lifts and as per directions of Engin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Painting of existing streetlight pole after scrapping the old paint and painted with suitable colour enamel/ Silver paint including coping/footing of the pole.-8 m and above street light pole. etc, co...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975- 25 Sqm...

Supplying & fixing Aluminium End Terminal (Lug)-25 Sqmm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for worki...

Providing and fixing copper lugs-1.5 Sqmm etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of 50 W LED bulb for post top lantern etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff-LT Cable 2.5 to 25 Sqmm etc, complete with all lead and lifts an...

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection ...

Providing and fixing decorative 75mm dia 3mtr long Galvanized lighting post with Galvanized M.S. double Bracket 40mm dia on either side of post 1.00mtr long for fixing LED street light fixtures and ar...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Painting of existing streetlight pole after scrapping the old paint and painted with suitable colour enamel/ Silver paint including coping/footing of the pole.-upto 5 m street light pole. etc, complet...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Supplying and fixing Bolts / Nuts / Washers ( galvanized general purpose) etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos ...

Fixing halogen/metal halide /SVL /IL /LED flood light fitting over existing pole/wall ceiling including clamps, bolts, nut sand wiring using suitable capacity wires. etc, complete with all lead and li...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Servicing of 125 KVA Diesel generator set including cost of labour, machinery, replacement of engine lubricant, oil filter, fuel filter, air filter, radiator water coolant oil, fuel injector, etc, wor...

Servicng of 30 KVA Diesel generator set including cost of labour, machinery, replacement of engine lubricant, oil filter, fuel filter, air filter, radiator water coolant oil, fuel injector, etc, worno...

Supplying, installation, testing & commissioning of 12V 120AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. etc, complete with all lead and lifts and as p...

Supplying, installation, testing & commissioning of 12V 150AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. etc, complete with all lead and lifts and as p...

Rewiring to Panel board of 30 KV generator including digital meters, MCBs and all acessories complete. etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.-15" Sweep (450 mm) etc, complete with all lead and lifts and as per directions of...

Supply of Magnetic Break Coil, 240Volts 2 phase for spillway motors including cost of transportation etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supply of 40 amps Starter contactor spare kit for 15 HP motor including cost of transportation etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supply of 40 amps Starter contactor coil kit for 15 HP motor including cost of transportation etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supply of 63 amps Starter contactor spare kit for 34 HP motor including cost of transportation etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supply of 63 amps Starter contactor coil kit for 34 HP motor including cost of transportation etc, complete with all lead and lifts and as per directions of Engineer-in-charge.

Supply of 100 amps 4 pin industrial top including cost of transportation etc., complete with all leads and lifts and as per directions of Engineer-in-charge

Supply of 100 amps 4 pin industrial socket including cost of transportation etc., complete with all leads and lifts and as per directions of Engineer-in-charge

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

Supplying & fixing of retro fit type-LED bulb.9 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70percent.efficacy greater than 80 lumen per W, life grea...