Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹44.2 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹49.6 L+₹5.5 L (12.4%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹49.8 L+₹5.7 L (12.8%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹52.6 L+₹8.4 L (19.1%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹54.4 L+₹10.2 L (23.1%)Rejected-Finance 120 144 III PHASE APNA VIHAR JAMMU J K | JAMMU | JAMMU | JAMMU AND KASHMIR | 180010 | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REHABILITATION OF TEMPORARY BUILDINGS INCLUDING GALVALUME SHEET AND ROOF OF CERTAIN BUILDINGS AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_614749_1
GEJC-60/2023-24
Open Tender
Civil Works
Item Rate
150 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
6 Oct 2023
21 Aug 2023
18 Sept 2023
21 Aug 2023
16 Sept 2023
4 Sept 2023
Amount
Providing & Fixing in position suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips incl Dismantling wall and ceiling boards (fibre pulp/insulation ) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixig the same in position after replacing the ceiling complete all as specified and as directed.
Dismantling unframed work timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and as directed.
Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 sq cm in section complete all as specified and as directed.
Demolition of brickwork / stone masonary built in cement mortar including all quoins, arches, pillars, but excluding precast concrete articles complete all as specified and as directed.
Material and labour brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete and fixed complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Suppy and fixing structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or MS tube pipe) including distance pieces, cleats etc Fe-410W (GradeE-250) quality 'A' including shop coat of primer complete all as specified and as directed.
Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc Fe-410W (grade E-250) complete all as specified and as directed.
Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge complete all as specified and as directed.
Material and labour for Asbestos cement sheeting 6mm thick, corrugated or semi-corrugated sheets in roofs, wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Material and labour for Asbestos cement two piece adjustable serrated ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces over newly plastered surfaces finished fair and even without using extra cement from brick or stone walls etc complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on surfaces other than fair faces of brick / concrete surfaces over newly plastered surfaces finished even and smooth without using extra cement complete all as specified.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished fair and even without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for preparation of new / old surface and applying two coats of oil bound distemper over and including a coat of wall putty 1 mm complete all as specified and as directed.
Material and labour for preparation of new / old plastered surface and applying two coats of cement based paint including one coat of alkali primer surface complete all as specified and as directed.
Material and labour for preparing surface of new steel of any description over 10cm width and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for preparing surface of old steel material of any description over 10 cm width or girth treated with one coat of synthetic enamel paint complete all as specified and as directed.
Demoilition of ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specfied and directed
Material and labour for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges and similar places complete all as specified and as directed.
Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/plinth protection laid in suitable panels finished even and fair all as spd. 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.
Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 nos GI tank nipple complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 nos GI tank nipple complete all as specified and directed by Engineer-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/S MANJIT SINGH AND SONS
M/S A TO Z ENGINEERS
bamral builder
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .