GES/PKT/104/2025-26 SPECIAL REPAIR TO TOILET AND BATH, SUNKEN TREATMENT TO ARREST LEAKAGE/ SEEPAGE INCLUDING CERTAIN MISC B/R WORKS IN JCO/ORs MD ACCN AT DHANGU COMPLEX UNDER GE SOUTH PATHANKOT

Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed.

M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastometic liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

M&L for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregates aggregate, as in sunken floors and mass concrete complete all as specified and directed.

M&L for damp proof course 15 mm thick in cement mortar 1:2 including mixing with WPC @ 3% by weight of cement complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of walls, finishing the surfaces even and smooth without using extra cement and curing the surface, complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface in CM 1:3 in ceiling, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for two coats of white wash on old plastered surface, as in ceiling including preparation of surfaces, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of primer as on walls surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surface, as in ceiling including preparation of surfaces, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of 2-3 mm thick wall care putty (JK/Birla) on new plaster surface of walls after -preparation of surfaces.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed.

S&F in repair 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked, complete all as specified and directed.

S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked, complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required .

S&F PVC (SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors, 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore any radius complete all as specified and directed.

S&F PVC (SWR) bends of 75mm bore any radius complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specifed and directed.

S&F in repairs 10 liters PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F 20mm bore GI tubing medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls and ceiling or laid in floors including dismantling of the existing pipe complete all as specified and directed.

S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings, fixed to walls and ceiling or laid in floors including dismantling of the existing pipe complete all as specified and directed.

S&F bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair stop valve/ angle valve (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed.

S&F vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over marble slabs or mild steel brackets complete all as specified and directed.

S&F Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S&F in repair shower PTMT 100mm fixing with 15mm pipe (minimum weight 40 gms) incl shower arm 15mm size with flange of PTMT any colour (minimum weight 40 gms) complete all as specified.

S&F in repair 32mm bore corrugated PVC waste pipe 60 cm long, complete all as specified and directed.

Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 600mm complete all as specified and directed.

M&L for granite18- 20 mm thick Machine cut , pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in kitchan platform , flooring including grinding mirror polishing and 15 mm thick screed bedding in cement mortor 1:4 and all other similar works complete all as specified and directed.

M&L for granite18- 20 mm thick Machine cut , pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in kitchan plateform , flooring including grinding mirror polishing and 15 mm thick screed bedding in cement mortor 1:4 for skirting or vertical surfaces etc complete all as specified and directed.

M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

Dismantling floor hearth or wall tiling incl cement mortar bedding (But not backing) removing serviceval tiles to store and rubbish off the premises complete all as specified and directed.

M&L for providing glazed ceramic coloured wall tiles of size 300mmx600mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for 400x400mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring with 1.5 sqmm (Nominal area) FRLSH PVC insulated and multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) 20 mm dia heavy grade having thickness not less than 2.00 mm with all acessories incl approved make sunken modular metal flush gang box (16 gauge) and suitable support frame and cover plate (inner/outer) of required modules swithc sockets complete connection of cable with MCBs through proper size copper/brass thimbles for one light/fan controlled by one 1 way switch.

M&L for replacement of existing un-serviceable switch piano with Modular switch 1 way 6A, 1 module ISI marked complete all as specified and directed.

M&L for ceiling rose 2-3 terminal with polycarbonate body size 65x20mm, complete all as specified and directed.

S&F in replacement of surface and wall mounted 10 W LED natural white engineering plastic battern with white acrylic cover duly prewired and connecting complete all as specified and directed by Engr-in-Charge.

Supply and Fix in replacement of LED fitting 1x20W LED including LED tube 4 feet long having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.

S&F exhaust fan, steel body AC single Phase, 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed.

Taking Down and refixing of Exhaust fans any size or tupe form the existing site and refixing the same place after carrying out necessary repair work including two coat of synthetic enamel paints of any aproved colour after cleaning etc. all as specified and direced by Engineer-in-Charge.

Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M & L for cutting hole in brick/stone masonary wall and making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including suitable nut and bolt for fixing exhaust fan all as specified and as directed. Note : (i) Rates are deems to be included to making the cutting hole smoothly and colour wash as per exisiting colour. (ii) Rates are deems to be including charges of hiring T & P, i.e. ledder square folding and insurance of labour deployed, being holes are made to be at multistorage bldgs of different height.

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

Please Enable Macros to View BoQ information