E1-535-2021-4.ERODE CITY MUNICIPAL CORPORATION.

Amount

Picking The Existing B.T Surface Up To 50mm Thick Including Screening Stacking and old metal for such complete is decided by the departmental officers etc Complete as per standard specification

Earth work excavation for Narrow Pipe Line Cutting in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Conveyance of excess excavated and surpluse earth to low laying areas upto 5 km lead including loading and unloading charges and all labours charges etc complete

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM/ surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying tack coat of 2.0 kgs/10 sqm over the B.T surface treated with binder using 2.0 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted

by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 Specification

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 45.27kgs of VG30 / VG40 bitumen and 5.03Kg of plastic waste (50.30*10%=5.03Kg) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory /

Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Raising the UGSS man hole cover upto the proposed road level including refixing the same over the cement concrete surface to an average hight to 0.15m to 0.25m plain cement concrete 1:1½:3mix using 20mm metal which will be laide over the brick work masonry surface including all labour charges for dismanling the existing cement concrete of all materials to site etc complete as per standared specification (In B.T. Road)

Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rock requiring blasting inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including clearing leveling the site etc., complete complying with standard specification (TNDSS No. 23, 24)

Cement concrete 1:4:8 mix (One cement four sand and Eight metal) using 40mm ISS hard broken granite stone jelly for foundation and flooring including dewatering wherever necessary and laid in layers of not exceeding 15cm thick to required thickness including all labour charges ect complete as per standard specification.

Centering for soffits of RCC slabs plane surface including strutting upto 3.00m height using mild steel of size 90cmx60cmx10 gauge fitted with MS angle of size 25mmx25mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced at 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification

a) Side Wall

b)Slab And Beams

Plain Cement concrete 1:3:6 mix (One cement three sand and six aggregate) using 20mm ISS gauge hard broken granite stone metal including cost and conveyance of all materials at site including all labour charges for concrete mixing laying concrete finishing the surface neatly watering curing etc., complete complying with standard specification

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Providing and laying in position standardised concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture ( Placticiser / super plasticiser ) in recommended . proportions as per IS 9103 to accelerate, related setting of concrete,improve workability without imparing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156Kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7670 Kg of sand , but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying,vibrating with mechanical

vibrators,finishing,curing,etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specificatin and as directed by the departmental officers -the coarse and Fine aggregates to be used should comply with the requirements of IS standards.(No separate payment will be made by the Department for the excess usage of materials)

Supplying, fabrication and placing in position of mild steel or ribbed tar steel for reinforced cement works including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidental charges etc., complete as per standard specification

Plastering with cement mortar 1:4mix (One cement and Four sand) 20mm thick concrete surface cleaning, curing etc., complete including cost of materials to site etc., complete as per standard specification

Providing and laying of hot applied themoplastic compound 2.50mm thick including reflective glass boads @2.50gms per sqm area thickness of 2.50mm exclusive of surface applied glass beads as per IRC 35 the finished surface to be level uniform and free from the surface etc complete as per standard specifications

Providing laying and jonting of UGSS house service connection ( HSC ) pipe line up to Road side drian using 110mmOD PVC pipe 6kg/cm2 with same diameter PVC dummy including cost of all materials to site, laying and Jointing of pvc pipe to proper gradient and alignmentetc including cost of necessary dismantling to existing UGSS manhole side wall and redo the nessary manhole wall makeing good etc complete

KOUSIC CO