REPAIRS TO WOODEN / STEEL AND ALUMINIUM JOINERY / FLOORS / PLUMBING AND RELATED WORKS IN DOMESTIC AREA AND MES QTRS AT AFA HYDERABAD

Amount

Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed

Taking down shutter of any description not exc 1 Sqm each complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame not.exc 1.5 sq. m complete all as specified and as directed

Resecuring or easing & adjusting shutters without taking down of shutters size not exc 2 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 sqm and not exc 2 sqm and refixing in the same opening after necessary easing & adjusting/resizing complete all as specified and as directed

Taking down Aluminium door shutters and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed

Taking down Aluminium window shutters and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed

M&L for Cleaning and greasing of floor spring of Aluminium door including petty repairs as required to make effective functioning of floor spring complete all as specified and as directed

S & F in repairs mild steel peg stays, size 300 mm for steel windows complete all as specified and as directed.

S & F in repairs mild steel handle / locking system for steel windows complete all as specified and as directed.

M&L for greasing and oiling of steel window shutters for smoothly closing and opening of any size complete all as specified and as directed

M&L for welding in repairs of thickness of metal exc 6 mm but not exc 9 mm and length exc 2.5 cm but not exc 5 cm complete all as specified and as directed

M&L for running welding in repairs of thickness of metal exc 6 mm but not exc 9 mm complete all as specified and as directed

Repair to rolling / collapasable shutters of any type by greasing operating for easy movement to safety levers, chain wheel and ball bearings and replacement of clips and function for smoothly closing and opening etc each shutter of any size complete all as specified and as directed.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge.

S&F Powder coated (Thickness not less than 50 micron) Aluminium anodised Grill, aperture not exc 75 mm ,size 6 mm x 4 mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and as directed

S&F 2nd class hard wood (sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F pressed steel frames (size 105 mm x 60 mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F pressed steel frames (size 125 mm x 60 mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 Type C-0 mix (using 12.5 mm graded stone aggregate) as in filling hollow of pressed steel frame complete all as specified and as directed.

S & F 35 mm thick second class hard wood, plain framed, panelled shutters (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers. complete all as specified and as directed.

S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywoodface panels, commercialmtype on both sides complete all as specified and as directed.

S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass / gauze.complete all as specified and as directed. Note :- glazing / gauzing will be measured separately

S&F 30 mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars, any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified and as directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F 12 mm thick prilaminated partical boad exterior grade laminated on both side with decorative choice lamination fixed to aluminium frame work for door panel shutter complete all as specified and as directed.

S&Faluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F in repairs double action floor door spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box main body of stainless steel cover, governing pivot made of brass, other parts amde of mild steel heavy duty and fixed for aluminium door complete all as specified and as directed.

S&Fof brass 4 Levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F 100 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed.

S&F of butt hinges, medium weight, cold rolled mild steel of 75 mm long complete all as specified and as directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but not exc one brick complete all as specified and as directed.

M & L for MS flat iron hold fast. Conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S&F in repairs of brass 4 Levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltscomplete all as specified and as directed.

S&F in repairs for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F in repairs for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

S&F in repairs for 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F in repairs 100mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F in repairs of butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed.

S&F in repairs 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified and as directed.

S&F in repairs 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S & F 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or ground / obscured type sheet glass, 3 mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and as directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position fixed with nails complete all as specified and as directed.

M&L 18 mm thick Prelaminated particle board interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws including fitting and fixtures etc complete all as specified and as directed.

M&L block boards 18 / 19 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work complete all as specified and as directed.

M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work complete all as specified and as directed.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive complete all as specified and as directed.

M&L for 19mm wide. external teak wood lipping, 6 mm thick, fixed with nails complete all as specified and as directed.

S&F of 100 mm brass Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sq.cm of 2nd class hard wood complete all as specified and as directed.

M&L in repair 2nd class hardwood Plain fillets (50 mm x 50mm) cxc 13 & not exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed.

M&L in repair 2nd class hardwood Plain fillets (50mm x 25mm) Exc 6 & n.exc 13 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

S/F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and as directed.

S&F Stainless steel butt hinges 75 mm long wih screws complete all as specified and as directed.

S&F standard quality magnetic catcher for cupboard shutters complete all as specified and as directed.

S&F in repairs 25 mm thick curtain rod aluminium powder coated (any colour) fancy type complete all as specified and as directed

S&F in repairs fancy type brackets with knobs suitable for 25mm dia curtain rod aluminium powder coated (any colour) including stay & side clamp as reqd at site complete all as specified and as directed

S&F in repairs Door seal (Snake guard) with Aluminium frame complete all as specified and as directed.

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and as directed.

M & L for Non - skid coloured ceramic tiles, 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match coloured tilesincluding Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and as directed.

M&L Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and ointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 350 x 250 x 7 mm / 450 X 350 X 7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete in ground floors (including tiles/floor finishes) and pavings n exc 15 cm thickness (Below or above GL) complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in Plinth protection etc ven and smooth Without using extra cementas in floors complete all as specified and as directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (40 mm graded aggregate) finishing cement concrete surface even and smooth Without using extra cementas in floors complete all as specified and as directed.

S&F 38 mm wide Glass dividing strips, 3 mm thick inserted in position, conform to design complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L machine cut kota stone slab 20 to 25mm thick in treads in window cill (provided in two layers with overlap) & length will be as per the length of windows) over cement screed base laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing and moulding including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided fo complete all as specified and as directed.

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), set in cement mortar as in kitchen flatform and shelves in kitchen slabs, etc :6 including necessary form work , complete all as specified and as directed.

M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, as in valley gutter, ridge of roof, wall and cladding etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410(Gde-250) complete all as specified and as directed.

Supply only mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed at other fitted with washer and nut 11 to 15 mm dia and , length of bolt exc 15cm and n exc 22.5cm long complete all as specified and as directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.

M&L for PCC1:3:6 type C-2 mix (using 40 mm graded stone aggregate) as in posts etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering/ cladding to wall, chajjas, valley gutter, fixed with self tapping screws complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed.

M&L for half brickwork with sub class 'B' old size bricks, straight or curved on plan, to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for plastering in internal wall surfaces of 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and as directed.

M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash etc.complete all as specified and as directed.

Taking up or down 15 mm bore of pipe PVC/steel tubing and connections, including for refixing or removal etc complete all as specified and as directed.

Taking up or down 20 mm bore of pipe PVC/steel tubing and connections, including for refixing or removal etc complete all as specified and as directed.

Taking up or down 25 mm bore of pipe PVC/steel tubing and connections, including for refixing or removal etc complete all as specified and as directed.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kg / cm2 fixed complete to walls or laid in floors complete all as specified and as directed.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and as directed.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 mm x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and as directed.

S&F of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

S&F in repairs of CP Bib taps 15mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs of Angle cock of 15 mm dia cast copper alloy with capstan head fancy type chromium plated etc complete all as specified and as directed.

S&F in repairs of concealed stop valves 15 mm dia casr copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.

S&F in repairs of stop valves 15 mm dia cast copper alloy fancy type CP and capstan headscrewed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed.

S&F in repairs of Gun metal globe or gate valves/ Non returning Valve of 20 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs of Gun metal globe or gate valves/Non returning Valve of 25 mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repairs of Ball valve 20 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and as directed.

S&F in repairs of Ball valve 25 mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 455gms) etc complete all as specified and as directed.

S&F in repairs of ABS chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm in repairs complete all as specified and as directed.

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and as directed.

S&F in repairs of PVC connection 15 mm size with brass CP nuts of length 600 mm complete all as specified and as directed.

S & F in repairs of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and as directed.

S & F in repairs of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and as directed.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and as directed.

S&F in repairs of brass chromium plated towel rail 600 mm long "D" type fixed with suitable steel screw etc complete all as specified and as directed.

S&F in repairs Soap dish, stainless steel of size 160 mm x 160 mm x 90 mm and fixed to wall complete all as specified and as directed.

S&F in repairs of stainless steel grating 100 mm dia without hole complete all as specified and as directed.

S&F in repairs of stainless steel grating 100 mm dia with hole complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x160 mm etc complete all as specified and as directed.

S&F in repair Stainless Steel Dish / plate Display Rack of size 750 mm x 600 mm x 250 mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rowel plugs amd brass screws at suitable places, etc complete all as specified and as directed. Make :- Prayag, Cat No: P-330 or Silver shine, Cat No: SSKPR-311 or any Equivalent make Polytuf / Shakti

S & F for 7 feet pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, pulley made up of delrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable)locking system to hide rope knot channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engineer-in-Charge and minimum weight of one pipe shall not be less than 0.20 kg/m, minimum weight of rope shall not be less than 7700 Gms / unit (for 04 pipes) complete all as specified and as directed.. Make :- Easy Dry or equivalent approved make

M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litresand write date of cleaning and due date of cleaning on OHT complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and as directed.

S&F in repairs of cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed.

Saiansh Associates

SRI RAM CONSTRUCTION