Tender ID

Delhi

Cancelled

Works

Civil Works - Roads

Widening of Road and Reconstruction of existing drain along Road No. 320 from RUB to Mohalla Clinic, Shalimar Bagh, Delhi under PWD Division NW R-1 and Sub Division NWR-14 Delhi.

Public Works Department

EE, NWR-1, PWD, Mukarba Chowk, Delhi-110033 | North Delhi, Delhi

Amount: ₹16.8 CrCloses: 10 Apr 2026Closed

Timeline

Published28 Mar 2026
Cancelled9 Apr 2026

Cancellation Details

Cancellation of Tender

Corrigendum No.1The tender of the above work is hereby cancelled due to administrative reasons.Reason: Change in NIT conditions/SpecificationsDocument: cancelled_1.pdf

Published 9 Apr 2026

Tender Value

₹16.8 Cr

EMD Value

₹26.8 L

Closing Date

10 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE, NWR-1, PWD, Mukarba Chowk, Delhi-110033

Address

EE, NWR-1, PWD, Mukarba Chowk, Delhi-110033

Work Description

Widening of Road and Reconstruction of existing drain along Road No. 320 from RUB to Mohalla Clinic, Shalimar Bagh, Delhi under PWD Division NW R-1 and Sub Division NWR-14 Delhi.

Tender Information

Tender ID

2026_PWD_289363_1

Reference Number

126/EE/NWR-1/PWD/2025-26

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Percentage

Period of Work

120 days

Location

EE, NWR-1, PWD, Mukarba Chowk, Delhi-110033

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Widening of Road and Reconstruction of existing drain along Road No. 320 from RUB to Mohalla Clinic, Shalimar Bagh, Delhi under PWD Division NW R-1 and Sub Division NWR-14 Delhi.

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

Required(i) Copy of receipt for deposition of original EMD to any division office of PWD (GNCTD) and scanned (.pdf)

Required(ii) Valid contractors registration/enlistment order (for enlisted CPWD contractors only). (.pdf)

Required(iii) A certificate of work experience issued by an officer not below the rank of Executive Engineer (.pdf)

Required(iv) Bidding Capacity (Form-C-1, C-2 and C-3) (.pdf)

Required(v) Affidavit on non judicial stamp paper of Rs. 100/- for Format F, Format -G, Format-H, Format-I (.pdf)

Required(vi) The Copy of GST Registration Certificate of the State in which the work is to be taken up, if.. (.pdf)

Required(vii) Copy of PAN Card issued by Income Tax Department. (.pdf)

Required(viii) Bidders are required to upload the NIT in PDF as uploaded by EE. This will satisfy digital (.pdf)

Required(ix) The agency has to upload details such as Proprietor name, Mobile No., e-Mail ID, Corresponde (.pdf)

Required(x) Letter of Transmittal as per Form-J. (Not applicable to bidder having enlistment in appropriate (.pdf)

RequiredCertificate of Financial Turnover from C.A. (Form A).(Not applicable to bidder having enlistment in (.pdf)

Required(xii) Bankers Certificate (Form B) or Net Worth Certificate (Form B-1) (Not applicable to bidder ha (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹26.8 L

Pre-Bid Meeting

Meeting Place

Chief Engineer, (N) Zone, PWD, 5th Floor

Important Dates

Last Activity

9 Apr 2026

Published

28 Mar 2026

Bid Opening

10 Apr 2026

Download Starts

28 Mar 2026

Download Ends

10 Apr 2026

Submission Starts

28 Mar 2026

Pre-Bid Meeting

6 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil
2Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil
3	Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete	-	Sqm	1	-
4	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.	-	Cum	1	-
5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
6Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
7Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
9Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
10	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar	-	Cum	1	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.67 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 5.20 MB

Work Item Documents

BOQ_384272.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil
2Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil
3	Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete	-	Sqm	1	-
4	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.	-	Cum	1	-
5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
6Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
7Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
9Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
10	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar	-	Cum	1	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

2Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete

Sqm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Cum

5Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

6Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

7Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

9Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Cum