PROVISION OF RAIN WATER HARVESTING PIT FOR NEW ASSEMBLY SHOP AT FGK KANPUR UNDER UNDER GE(I) (P) FY KANPUR.

Amount

Excavation over areas n.exc 1.5 deep and getting out in soft/loose soil

Excavation over areas exc 1.5 but n. exc 3m deep and getting out in soft/loose soil

Excavation over areas exc 3 m but n. exc 4.5 m deep and getting out in soft/loose soil

Excavation over areas exc 4.50 m but n. exc 6.00 m deep and getting out in soft/loose soil

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M & L Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in Lintel up to 1.50 m clear span, cills steps, seismic and other similar bands plinth courses etc. and mass concrete all as specified.

M&L RCC M-30 (using 20 mm graded aggregate) as in slab support on walls, beams and columans in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

M&L RCC M-30 (using 20 mm graded aggregate) as in fins, fascias, louvres, parapets, and railings, buffer wall, etc all as specified

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, all as specified .

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, all as specified .

M&L 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

All as per item no 14 above but 6mm to 8mm dia, as stirrups and binders

M&L Formwork to sides of slab complete all as specified and directed.

M&L Formwork to flat/covered soffits of suspended slabs such as roof slabs , floor slabs , floor slabs , landings and similar works complete all as specified and directed.

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rolled /rammed to a true surface of broken stone / boulders

M&L for reinforced concrete pipes , class NP2, laid and jointed 150mm bore pipe with collars.

M&L for concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested all as specified

Providing precast cement concrete type 1:2:4 (20mm aggregate) but in landing , covers slabs, manholes etc set in CM 1:4 all as specified and directed by Engineer-IN-Charge

M&L for hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire not less than 0.9mmin dia exc 4kg , supply and fixed in reinforced complete, all as specified and as directed.

M&L for site clearance for soft and loose soil at site

M&L for loose soil Spreading and levelling in layers n.exc. 25 cm thick

Manual Boring of 300 mm dia size bore through any kind of soil / strata including hard stone / boulder by manual rotary method up to and including 80 Feet depth below ground level complete all as specified.

Supply and fixing MS ERW casing pipe 150 mm dia nomonal bore class 'B' BIS certified as per IS 1239 (Part-I) including one coat of bitumenous paint complete all as specified & directed by Engr-in-charge.

Supply and fixing MS ERW slotted pipe 150 mm dia nomonal bore Class 'B' including one coat of bitumenous paint with 3mm dia slot size, complete all as specified & directed by Engr-in-charge.

Supply and fixing MS ERW slotted pipe 150 mm dia nomonal bore Class 'B' including one coat of bitumenous paint , with 1.58 mm dia slot size, complete all as specified & directed by Engr-in-charge.

S& F wrought iron bail plug for 150 bore MS pipe all as specified and directed by Engineer -in- Charge.

Supply and laying pea gravel for packing of size 3 to 10 mm to be designed by the contractor of natural shape brought direct from river bed and packing around the casing pipe and slotted pipe complete all as specified and directed

Supply and laying of broken stone or boulders, Loose filling with aggregates of gauge 80 to 150 mm in recharge pits etc., complete all as specified and directed

Supply and laying of coarse sand of size 1.5 to 2.0 mm, complete all as specified and directed

J.B.ENTERPRISES