Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
25 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS.1
18 conditions · 6 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N- Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing 1.1.1 not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from 1.1.2 Govt/Semi-Govt Organizations (b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
Note: Separate completed works of minimum required values for each 1.1.3 component can also be considered for fulfilment of technical eligibility criteria.
Defination of Similar Work :- Any building works with framed structure.
80 conditions · 28 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender form (First Sheet) as per 'Annexure-I' of Standard Tender Document.
Firm details as per 'Annexure-II' of Standard Tender Document.
Self attested copy of Permanent Account Number (PAN) issued by Income Tax Department.
For Sole Proprietorship firm submit details as per given below :-
Sole Proprietorship firm attached Affidavit as per 'Annexure -X' of Standard Tender Document.
Special power of Attorney as per proforma given in 'Annexure XI' of Standard Tender Document to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself)
(A) i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
(ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Partnership firm submit details as per given below :-
Self/Notary attested copies of Partnership deed.
Special Power of Attorney as per proforma given in 'Annexure- XII' of Standard Tender Document to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
An undertaking that the Partnership firm is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For JV firm submit details as per given below :-
Memorandum of Understanding of JV as per proforma given in 'Annexure-XIV' of Standard Tender Document.
Letter of consent as per proforma given in 'Annexure-XV' of Standard Tender Document to be submitted by a partnership firm participating as a Member of JV firm (wherever applicable).
Notary Certified copy of resolution passed by Board of Directors of the Company,permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per 'Annexure-XVI' of Standard Tender Document.
Special Power of Attorney as per proforma given in 'Annexure- XVII' of Standard Tender Document to be submitted by Limited Companies or Sole Proprietor participating as member of JV firm (wherever applicable).
Registered Society & Registered Trust: The tenderer shall submit
(i) a copy of the Certificate of Registration
(ii) a copy of Deed of Formation
(iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.
An undertaking that the Registered Society & Registered Trust is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender:
(i)A copy of LLP Agreement
(ii)A copy of Certificate of Incorporation
(iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.
(iv)An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
(e)Company registered under Companies Act 2013:
(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company
(ii)A copy of Certificate of Incorporation
(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
(iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per Clause 46A.1., Part II of GCC-2022 and Advance correction slip No.1: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs.2 crore. Provided further that, in a contract where PVC is applicable, following shall be outside the purview of price adjustments (i.e., shall be excluded from the gross value of the work for the Purpose of price variation): a) Materials supplied by Railway to the Contractors, either free or at fixed rate; b) Any extra item(s) included in subsequent variation falling outside the purview of the Bill(s) of Quantities of tender, under clause 39. (I) (b) of these Standard General Conditions, unless applicability of PVC and 'Base Month' has been specially agreed, while fixing the rates of such extra item(s)'
Any Conditional offer will be summarily rejected.
In case of any difficulty, help desk available on the website of IREPS may be approached.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
All the tenderers/Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through ONLINE payment modes available on IREPS portal line net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts,FDR etc. are not allowed.
Payment of Earnest Money deposit (EMD) and Tender Document Cost (TDC), in respect of E-Tendering, should be accepted through net banking or payment gateway only.
Note for Commercial compliance :-
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Due to roll out of GST with effect from 01.07.2017. The following additional terms and special condition are given below :-
For the tenders due to open before roll out of GST- All the bidders/tenderers while quoting the rates should clearly indicate the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under Statutory Variation Clause.
For the tenders opening after roll out of GST- All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Tender will be opened at the specified time and date. In case the specified date is declared a holiday, the tender would be opened at the same time on the next working day.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway,make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tender, the contract shall be terminated, Earnest Money Deposit (EMD), Performance Guarantee (PG) and Security Deposit(SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
In partial modification to Railway Board's letter No. 2007/CE.1/CT/18 dated 05.07.2010 and 14.09.2017, it has been decided to extend the scope of PMC services for all works contracts costing more than Rs. 10 Crore in open line.
At KAMG - New construction of RPF/Barrack, office and requirement for 15 nos. bed at RPF/Out post /KAMG.
05-AP-I-2026
05-AP-I-2026
Open
Works - General
12 Months
Alipurduar, West Bengal
₹0
₹2.7 L
25 Jun 2026
3 Jun 2026
11 Jun 2026
110 items across 1 schedule · ₹1,13,67,030.24 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 351 | 205.45 | 72,112.95 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 318 | 368.65 | 1,17,230.7 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 243 | 2,161.2 | 5,25,171.6 |
| 4 | With Chlorpyriphos E.C. 20% with 1% concentration | Metre | 546 | 32.3 | 17,635.8 |
| 5 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%). | cum | 5 | 7,555.05 | 37,775.25 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 23 | 7,365.15 | 1,69,398.45 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 24 | 6,833.4 | 1,64,001.6 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 19 | 6,670.25 | 1,26,734.75 |
| 9 | Foundations, footings, bases for columns | Sqm | 48 | 307.95 | 14,781.6 |
| 10 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 342 | 57.15 | 19,545.3 |
| 11 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 251 | 307.95 | 77,295.45 |
| 12 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 10 | 766.55 | 7,665.5 |
| 13 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 656 | 608.35 | 3,99,077.6 |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 185 | 804.25 | 1,48,786.25 |
| 15 | 40 mm thick | Sqm | 10 | 1,430.3 | 14,303 |
| 16 | Cold twisted bars | Kg | 219 | 89.65 | 19,633.35 |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 4692 | — | 89.65 | 4,20,637.8 |
| 18 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 60 | 8,683.8 | 5,21,028 |
| 19 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 72 | 10,306.2 | 7,42,046.4 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 74 | 6,658.25 | 4,92,710.5 |
| 21 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 338 | 1,018.05 | 3,44,100.9 |
| 22 | From ground level upto plinth level | cum | 20 | 6,849.5 | 1,36,990 |
| 23 | Area of slab over 0.50 sqm | Sqm | 123 | 4,998.1 | 6,14,766.3 |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 475 | 1,063.45 | 5,05,138.75 |
| 25 | Sal wood | cum | 1 | 1,06,720.85 | 1,06,720.85 |
| 26 | 35 mm thick shutters | Sqm | 15 | 3,704.45 | 55,566.75 |
| 27 | 30 mm thick shutters | Sqm | 24 | 3,360.7 | 80,656.8 |
| 28 | 35 mm thick shutters | Sqm | 57 | 2,511.95 | 1,43,181.15 |
| 29 | 30 mm thick shutters | Sqm | 10 | 2,682.05 | 26,820.5 |
| 30 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 29 | 3,086.1 | 89,496.9 |
| 31 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg 1454 | — | 197.7 | 2,87,455.8 |
| 32 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 147 | 194.35 | 28,569.45 |
| 33 | Hollock wood | cum | 5 | 62,238.25 | 3,11,191.25 |
| 34 | 300x16 mm | Each | 24 | 180.55 | 4,333.2 |
| 35 | 125x85x5.5 mm (heavy type) | Each | 19 | 228.9 | 4,349.1 |
| 36 | 250x10 mm | Each | 19 | 374.35 | 7,112.65 |
| 37 | 125 mm | Each | 19 | 205.1 | 3,896.9 |
| 38 | 300x16 mm | Each | 19 | 260.3 | 4,945.7 |
| 39 | 150x10 mm | Each | 24 | 75.55 | 1,813.2 |
| 40 | 125 mm | Each | 24 | 60.05 | 1,441.2 |
| 41 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (+/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 33 | 462.25 | 15,254.25 |
| 42 | Decorative finish (wood grained finish) | Sqm | 14 | 4,018.4 | 56,257.6 |
| 43 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 1398 | — | 111.95 | 1,56,506.1 |
| 44 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 10 | 9,397.35 | 93,973.5 |
| 45 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 19 | 185.95 | 3,533.05 |
| 46 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm | 508 | 733.3 | 3,72,516.4 |
| 47 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 347 | 545 | 1,89,115 |
| 48 | 18 mm thick | Sqm | 14 | 570.75 | 7,990.5 |
| 49 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 24 | 7,958.65 | 1,91,007.6 |
| 50 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Sqm | 32 | 1,142.8 | 36,569.6 |
| 51 | Size of Tile 600x600 mm | Sqm | 472 | 1,416.65 | 6,68,658.8 |
| 52 | 0.63 mm thick with zinc coating not less than 275 gm/ sqm | Sqm | 86 | 978 | 84,108 |
| 53 | 0.63 mm thick with zinc coating not less than 275 gm/sqm | Metre | 29 | 750.85 | 21,774.65 |
| 54 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. | Sqm | 224 | 462.1 | 1,03,510.4 |
| 55 | 110 mm diameter | Metre | 33 | 319.75 | 10,551.75 |
| 56 | 110 mm | Each | 10 | 309.5 | 3,095 |
| 57 | 1:4 (1 cement: 4 fine sand) | Sqm 1368 | — | 294.85 | 4,03,354.8 |
| 58 | 1:6 (1 cement: 6 fine sand) | Sqm | 926 | 282 | 2,61,132 |
| 59 | 1:4 (1 cement: 4 fine sand) | Sqm | 67 | 339.7 | 22,759.9 |
| 60 | 1:4 (1 cement: 4 fine sand) | Sqm | 185 | 402.15 | 74,397.75 |
| 61 | 1:6 (1 cement: 6 coarse sand) | Sqm | 10 | 294.35 | 2,943.5 |
| 62 | 1:3 (1 cement: 3 fine sand) | Sqm | 78 | 374.15 | 29,183.7 |
| 63 | 1:3 (1 cement : 3 fine sand) | Sqm | 347 | 253.05 | 87,808.35 |
| 64 | Neat cement punning. | Sqm | 55 | 67.8 | 3,729 |
| 65 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 907 | 214.3 | 1,94,370.1 |
| 66 | Flush / Ruled/ Struck or weathered pointing | Sqm | 1 | 214.4 | 214.4 |
| 67 | New work (three or more coats) | Sqm | 447 | 32.45 | 14,505.15 |
| 68 | New work (two or more coats) with a base coat of white washing with lime | Sqm 1501 | — | 44.25 | 66,419.25 |
| 69 | Two or more coats on new work | Sqm | 944 | 92.75 | 87,556 |
| 70 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm 2184 | — | 97.6 | 2,13,158.4 |
| 71 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 29 | 144.9 | 4,202.1 |
| 72 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 115 | 140.05 | 16,105.75 |
| 73 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | Sqm | 168 | 61.45 | 10,323.6 |
| 74 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Sqm | 56 | 62.95 | 3,525.2 |
| 75 | Two or more coats on new work | Sqm | 168 | 131.45 | 22,083.6 |
| 76 | One or more coats on old work | Sqm | 353 | 90.85 | 32,070.05 |
| 77 | Orissa pattern W.C Pan of size 580x440 mm | Each | 6 | 3,850.65 | 23,103.9 |
| 78 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re- rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. | Sqm | 280 | 180.5 | 50,540 |
| 79 | 90 mm to 45 mm size stone aggregate | cum | 35 | 1,937.6 | 67,816 |
| 80 | 63 mm to 45 mm size stone aggregate | cum | 25 | 1,624.5 | 40,612.5 |
| 81 | Over burnt (Jhama) brick aggregate 120 mm to 40 mm | cum | 29 | 974.25 | 28,253.25 |
| 82 | Stone screening 13.2 mm nominal size (Type A) | cum | 17 | 1,865 | 31,705 |
| 83 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 79 | 865.8 | 68,398.2 |
| 84 | Over burnt (Jhama) brick aggregate 120 mm to 40 mm | cum | 29 | 725.6 | 21,042.4 |
| 85 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 145 | 179.5 | 26,027.5 |
| 86 | On W.B.M / W.M.M. @ 0.4kg/sqm | Sqm 273.59 | — | 11.6 | 3,173.64 |
| 87 | With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt | Sqm | 269 | 227 | 61,063 |
| 88 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | Sqm | 268 | 79.85 | 21,399.8 |
| 89 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in- charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) | Metre | 95 | 303.65 | 28,846.75 |
| 90 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 2 | 5,268.85 | 10,537.7 |
| 91 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 6 | 2,040.85 | 12,245.1 |
| 92 | 610x510 mm bowl depth 200 mm | Each | 2 | 4,274.4 | 8,548.8 |
| 93 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 6 | 1,411.15 | 8,466.9 |
| 94 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | Each | 6 | 942.15 | 5,652.9 |
| 95 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 20 | 1,018.05 | 20,361 |
| 96 | Sand cast iron S&S as per IS - 1729 | Each | 4 | 530.7 | 2,122.8 |
| 97 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 12 | 573.6 | 6,883.2 |
| 98 | 15 mm dia nominal bore | Metre | 38 | 304.15 | 11,557.7 |
| 99 | 25 mm dia nominal bore | Metre | 24 | 491.2 | 11,788.8 |
| 100 | 50 mm dia nominal bore | Metre | 24 | 893.2 | 21,436.8 |
| 101 | 25 to 40 mm nominal bore | Each | 5 | 757.1 | 3,785.5 |
| 102 | 15 mm nominal bore | Each | 14 | 303.85 | 4,253.9 |
| 103 | 100 mm diameter | Each | 6 | 166.35 | 998.1 |
| 104 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre 10000 | — | 9.7 | 97,000 |
| 105 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 10 | 96.75 | 967.5 |
| 106 | Rectangular shape 600x450 mm internal dimensions | Each | 4 | 1,255.25 | 5,021 |
| 107 | Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 | Each | 4 | 4,290.35 | 17,161.4 |
| 108 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 112 | 433.95 | 48,602.4 |
| 109 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 234 | 531.8 | 1,24,441.2 |
| 110 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 42 | 1,019.8 | 42,831.6 |
| Schedule total | ₹1,13,67,030.24 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NewGCC2022_compressed.pdf
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf GCC 2022 correction slip 1 to 11
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
EPFMPAct.pdf
ATTACHMENT
BG.pdf
ATTACHMENT
STANDARD TENDER DOCUMENT
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf
ATTACHMENT
StandardTenderDocument05-AP-I-2026RPFBarrackKAMG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .