Work of Removal Design Fabrication and Erection of MS Water Storage Tank Platform along with allied works at various locations in the premises of Old Ghatkopar Pumping Station

Amount

Work of Removal, Design, Fabrication, and Erection of MS Water Storage Tank Platform along with allied works at various locations in the premises of Old Ghatkopar Pumping Station

Dismantling steel work in built up sections in angles, tees, flats and channels of rolling shutters, grills, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivets, welding, etc. including dismembering & stacking within 50 meters lead

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)

Chequered plates for platform 8mm thickness

50 x 50 x 6 mm of M.S. angle. For X Bracing

Excavation by chiseling by manual operations, pneumatic breaker, hammer, drilling, compressor breaker, jack hammer etc. for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, poles, pits & general building works in hard rock, reinforced concrete, Bituminous macadam for depths/lifts upto 1.5M, including dressing/trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering,consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in-Charge, loading.Note: 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes if any

Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge.(Note: The rate includes the royalty and other taxes if any)

Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sands: 4 graded stone aggregate 20 mm nominal size)

C / channels Size: 150x75mm

Hollow Pipe or Box sections of TATA Stuctura

25 x 25 x 3 mm of M.S. angle.

Plates / flats 25x5

M.S. ornamental railing weighing above 15 kg and upto 20 per sqmt

ASY ELECTRICAL & ENGINEERING (BID ID -6546411)

MAHARASHTRA TRADING AND GENERAL SUPPLIERS (BID ID -6544262)