ERODE DT SIVAGIRITP NNT 2023-2024Renovation to the Anganwadi Building Top Roof at Ward No.7 Amman Kovil

Amount

Chipping and removing the damaged floor chipped and removed away from site

Paving the Floor with Pre-polished Anti-Skid floor tiles - 20 mm thick including cost and conveyance of all materials to site and all labour charges etc complete

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Dismantaling the Brick work in using cement mortor

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4"and conveyance of all materials to site and all labour charges etc complete -10 cum

Plastring 1:5 mix 12 mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Supply and delevery and fixing of New window withsize of 0.90 m x 1.20m including fixing charges etc complete New Window 0.90 x 1.20m

New Ventilator 0.60 x 0.60 m

Labour charges for fixing windows & Ventilator including cost and conveyance etc complete New Window 0.90 x 1.20m

New Ventilator 0.60 x 0.60 m

Removing the Damaged AC sheet including all the charges etc complete

Roofing with best quality Puf panel sheet including the all charges etc complete

Supply and fixing of New Indian type water closet including fixing charges etc complete

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Exterior emulsion finishing two coats over one coat of primer including all cost and conveyance of materials and labour charges etc., complete

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)complying with standard specification and as directed by the Departmental Officer.

Painting the black board with two coats of black board paint of approved quality including all cost and conveyance of materials and labour charges etc., complete

Sri Nalli Builders