GE/J/A 2020-21(8963/E8)

Amount

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil ,complete all as specified and as directed.

Excavation in trenches exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in any type of soil.complete all as specified and as directed.

All as per item No. 02 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Spreading and levelling in layers n. exc 25 cm thick and well ramming including watering as required.complete all as specified and as directed.

Removing excavated at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&L 40 MM thick PCC 1 :2 :4 (12.5 mm Graded agreegrade) as in DPC ,complete all as specified and as directed.

M&L bitumen blown any grade , applied hot , two coats,to concrete surface at the rate of 1.5 kg per sq m per coat,complete all as specified and as directed.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length,complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 ,complete all as specified and as directed.

M&L reinforced cement concrete M-25 (design mix ) as in slab supported on wall beam etc,complete all as specified and as directed.

M&L reinforced cement concrete M-25 (design mix ) as in beam, contilevers , bressummers, lintel overone meter span ,complete all as specified and as directed.

M&L form work to soffit and suspended slab such as roof slab etc,complete all as specified and as directed.

M&L Form work to side and soffit of floor or roof beam etc.,complete all as specified and as directed.

M&L mild steel TMT bar 10 mm dia and over cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip,complete all as specified and as directed.

M&L mild steel TMT bar 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip,complete all as specified and as directed.

M&L for PCC 1 : 2 : 4 Type B0 using 12.5 mm graded stone aggregate as in roof curb, levelling course etc. including weathering , slightly rounded or chamfered angle and throating ,complete all as specified and as directed.

M&L for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltr / Sqm over 15mm thick rendering in blown 85/25 @ 1.20 kg/Sqm and laying 3mm thick APP 3 kg / sqm with overlap of 100 mm and end lap 150mm and finally applying alluminium based paint on top ,complete all as spacified and as directed.

Racking out joints / Poitng tosquare rubble masonery jodhpur type reguler coursed built in cement mortar ,complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

M&L for 15mm thick rendering in cm 1:6 on stone masonry ffinished even and smooth ,complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on facia /RCC Chhaja, wall etc all as directed & finished even & smooth ,complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate ) as in subbase,complete all as specified and as directed.

M&L Hard core of broken stone or boulders gauge n exc 63 mm , deposited , spread and levelled in layers n.exc 15 cm thick , watered and rammed to a true surface.

M&L for PCC 1:3:6 type C-1 50 mm thick as in plinth protection ,complete all as specified and as directed.

Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge)

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge)

S/F for 3 mm thick plain glass ordinary quality & glazing ,complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames ,complete all as specified and as directed.

M&L Steel rolling shutter thickness of lath 1.25mm without ball bering as spacified including top cover , anchoring rod , haps and staple and one shop coat of primer , erected in position as indicated , complete Push pull or manual type.

S&F mild steel work as in doors frames,cooler stand etc. using MS angle iron ,complete all as specified and as directed.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold etc. fast iron fixing including necessary form work ,complete all as specified and as directed.

M/L for two coat of enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10Cm width,complete all as specified and as directed.

M&L of 18-20mm thick KOTA stone slab, machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and mirror polishing with 15mm thick screed in CM 1:6 ,complete all as specified and as directed.

All as per item No 34 above but in verticle surface over 10 mm thick rendering .

M/L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M & L PCC solid building blocks 10mm thick type B1 1:2:4 using 20mm graded aggregate set in cement mortat 1:4 ,complete all as specified and as directed.

M & L RCC Nominal mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.

M&L preperartion of newly plastered surfaces of wall and applyin three coat of white wash ,complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash ,complete all as specified and as directed.

M/L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation

S/F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated.

100 mm thick Medium weight , cold rolled mild steel butt hinges

S/F of aluminium anodized,tower bolt 200 mm long

S&F aluminium anodised handle cast type of size 150mm long

S/F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long ,complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring 140 mm long in repairs.

M/L for two coat of enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth all as specified.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out any type of soil, complete all as specified and as directed.

All as per item No. 49 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe,complete all as specified and as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe ,complete all as specified and as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 250mm bore of pipe ,complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for remaval of debirs to a distance n exc 50mtrs and depositing where directed complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately).

Material an labour for RCC pipe NP-2 150mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

Material an labour for RCC pipe NP-2 200mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

Material an labour for RCC pipe NP-2 250 mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling in mass concrete ,complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 C2 using 40 mm graded crushed stone agg as in foundations filling and mass concrete ,complete all as specified and as directed.

Demolition of stone masonry built in cement mortar all as specified and directed by Engr-in-Charge.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 ,complete all as specified and as directed.

All as per item No 63 above but except stone in CM 1:6

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing ,complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agg as in coping of manhole including necessary form work ,complete all as specified and as directed.

Supply only waterproofing compound.

Returning , filling in soft/disintegrated Rock (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick ,complete all as specified and as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point ,complete all as specified and as directed.

Supply and Fix cast iron foot steps, n. exc 5 Kg each in manholes.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2.

Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as 150mm dia

All as per Item No 75 above but 200 mm dia

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp as per dierction of engineer in charge

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm complete

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm complete

All as per item No 81 above but fixed in wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm

S&F PVC (SWR) bends any radius 110mm

S&F PVC (SWR) bends 75mm dia with oval acess door

S&F PVC SWR vent cowl 110mm

S&F PVC SWR vent cowl 75mm

S&F 75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

S&F 110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

M&L for two coat of colour wash over one coat of white wash on newly plastered surfaces or unplastered surface incl preparation of wall ,complete all as specified and as directed.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete ,complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces ,complete all as specified and as directed.

M & L RCC design mix M-30 using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified as and directed.

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified as and directed.

S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified as and directed.

Supply only Integral water proofing compound

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site.

Pumping out water inflow caused by spring or tidal or river seepage, broken water mains or drains and the like with pumping set of 5 HP to 9 HP including POL/power consumption & operator maint etc. All as directed. Note : (i) This item shall be operated only when specifically ordered by Engr-in-charge.

S/F MS angle iron as in fencing post/gate including fabrication for hole for fixing the nut and arrengement for fixing barbed wire.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining & fixing to any type of strandard rails straining bolts incl securing or tying at crossing with & provision of galvanised mild etc.

M&L M/S Surface of any description , over 10 cm width or girth applying two coat of synthetic enamelpaint over a coat of red oxide primer including prepration.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone agg as in coping.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agg including necessary form work ,complete all as specified and as directed.

Cleaning/Removal of garbage/ block line to drain with cleaning machine shall be hired from state municipal corporation(or by manually) in the existing line incl cleaning of complete line laid at any depth and at location between Banar Road to Cantt Area and through out the garbage or wastage out side the defence land all as directed to the entire satisfaction of Engr-in-Charge.

Taking down carefully cement plaster/ spalled out concret from ceiling of RCC slab, sunshedes, beams, etc by chipping out lightly including necessary scaffoding etc complete all as spd & directed by Engr-in- charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for One light point controlled by one, one way switch

All as per Item No 107 above but One fan /Exhaust fan, point controlled by one way switch.

All as per Item No 107 above but One socket outlet 3 pin 6 Amps on same board

All as per Item No 107 above but One socket outlet 3 pin 6 Amp on independent board

All as per Item No 107 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp FT.

S&F socket out let , 3 pin ,16 Amp FT. ISI Marked

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

supply and fix socketed stepped type electonic fan regulator flush type , ISI Marked.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings ISI Marked including 9 watt led lamp.

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S complete all as specified.

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified cat part No LSTO-30-CDL of CG or equivalent in Havell,s/ Philips.

S & F , Ceiling fan 1200 mm Sweep complete with all accessories including fan blades of WHITE COLOUR, ISI Marked energy efficient 5 star rating Connecting up complete with and including three core flexible PVC insulated multi stranded copper condutor of size 1.0 sqmm from ceiling rose/ conector to fan ( earth wire to connected to fan hook) Make :- Model Newtec of KHAITAN/CG/ PHILIPS/Orient.

S&F distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

M& L for XLPE cable insulated armoured heavy duty electric cable with insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sq mm 2 core.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

D DEV COMPANY