Himachal

Active

Works

Civil Works

A/R and M/O various Type- I to Type- VI Qtrs of GAD at Kasumpti, Shimla-9

Public Works Department

Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 7 Oct 2026

Timeline

Published28 Sept 2026
Closes7 Oct 2026
Bid Opening7 Oct 2026

Tender Value

Refer Docs

EMD Value

₹4,000

Closing Date

7 Oct 2026, 10:00 am

Tender Inviting Organisation

Name

Executive Engineer Division Kasumpti HPPWD Shimla-

Address

Executive Engineer Division Kasumpti HPPWD Shimla-3

Work Description

P/F Cupboard ,White/washing and , P/F panelling in Type- III Set no. 824 at New Shimla Under Kasumpti Section. ) (Excluding GST

Tender Information

Tender ID

2026_PWD_144492_13

Reference Number

SD-I-CTR-Tender-26- 18248 dt 25-09-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

Shimla

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredContractor registration (Refer General rule No.23 and as per invitation of bid (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18) (.pdf)

RequiredForm No. 7/8 duly signed with full address and mobile No (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹4,000

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

7 Oct 2026

Download Starts

28 Sept 2026

Download Ends

7 Oct 2026

Submission Starts

28 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (32 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Of area 3 sq. metres and below (Excluding GST)	2	Each	254.24	₹508.48
2	Providing and fixing panelled glazed or shutters for doors windows and clerestory windows. Fixing with but hinges of required size with necessary screws,excluding panelling with will be paid for seprately , all complete as per directions of the Engineer-in-Charge. (i) 35 mm thick (a) 2nd class deodar wood. (Excluding GST)	4.91	Per Square Metre	4,067.8	₹19,972.9
3	Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick (ii) 2nd class deodar wood (Excluding GST)	0.52	Per Square Metre	3,813.56	₹1,983.05
4	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) (i) 150x10mm	12	Each	84.75	₹1,017
4.1	(ii) 200x10 mm	5	Each	93.22	₹466.1
5	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm (Excluding GST)	5	Each	67.8	₹339
6	Providing and fixing bright finished brass hard drawn hooks and eyes ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200 mm (Excluding GST)	2	Each	59.32	₹118.64
7	Providing and fixing 19mm thick water proof commercial board in shelves/shutters box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST)	31.33	Per Square Meter	1,228.81	₹38,498.62
8	Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)	12.84	Per Square meter	805.08	₹10,337.23
9	Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 6mm (six milimetre)thick (Excluding GST)	3.4	Per Square Meter	720.34	₹2,449.16

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.67 MB

Work Item Documents

SBD193486.pdf

Tender Documents • 7.29 MB

BOQ_214902.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Of area 3 sq. metres and below (Excluding GST)

Each

254.24

₹508.48

Providing and fixing panelled glazed or shutters for doors windows and clerestory windows. Fixing with but hinges of required size with necessary screws,excluding panelling with will be paid for seprately , all complete as per directions of the Engineer-in-Charge. (i) 35 mm thick (a) 2nd class deodar wood. (Excluding GST)

4.91

Per Square Metre

4,067.8

₹19,972.9

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick (ii) 2nd class deodar wood (Excluding GST)

0.52

Per Square Metre

3,813.56

₹1,983.05

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) (i) 150x10mm

Each

84.75

₹1,017

4.1

(ii) 200x10 mm

Each

93.22

₹466.1

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm (Excluding GST)

Each

67.8

₹339

Providing and fixing bright finished brass hard drawn hooks and eyes ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200 mm (Excluding GST)

Each

59.32

₹118.64

Providing and fixing 19mm thick water proof commercial board in shelves/shutters box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (Excluding GST)

31.33

Per Square Meter

1,228.81

₹38,498.62

Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)

12.84

Per Square meter

805.08

₹10,337.23

Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 6mm (six milimetre)thick (Excluding GST)

3.4

Per Square Meter

720.34

₹2,449.16