Periodical services to certain Bldg and comprehensive repair to joinery flooring plastering sanitary fittings internal water supply incl other associated work at RMS Dholpur

Amount

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 including Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of in cement mortar 1:4, finished even and smooth without using extra cement.

Taking down cement plaster of any description including racking out joints, hacking for key scrubing down with water etc complete all as specified.

M&L for rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work or on one side of lathing in cement mortar 1:6, finished even and fair complete all as specified.

M&L rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilling surfaces complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished even and smooth without using extra cement on edges/ Chajjas/Roof projection and simlar courses etc complete all as specified.

M&L for 1.5 mm thick each (in two coats) wall care Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified.

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified.

M & L preparation of newly plastered surfaces and applying three coats of white wash in ceiling complete all as specified.

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified.

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work, complete all as specified.

M&L for Two coats of oil emulsion distempering white or tinted over old plastered , over & including 1.5mm thick wall care putty on Wall after sand paper gentle rubbing to obtain smooth surfaces including all necessary arrangement for execution of work complete all as specified.

M&L for applying two coats of cement base paint over old plastered surfaces with using hand roller complete all as specified.

M&L for applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint over old plastered surface complete all as specified.

M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified.

All as per Srl item No 15 here in above but applying one coat of white wash on ceiling complete all as specified.

all as per Srl item No 15 here in above but applying one coat of distemper oil emulsion using hand roller white or tinted on ceiling complete all as specified .

M&L for preparation of old surfaces of any description over 10 cm girth or width, not otherwise described and applying one coats of Plastic emulsion paint on brick, stone, concrete, Asbestos cement or plastered surface complete all as specified.

M&L for preparation of old surfaces of any description over 10 cm girth or width, not otherwise described and applying one coats of Synthetic enamel paint on brick, stone, concrete,or plastered surface complete all as specified.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified.

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified.

M&L for one coat painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down chowkhats or frames exc. 1.5 sq. M but not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified.

Taking down shutter of any description area exc 1 sqm and n. exc 2 sqm and removing from the site complete all as specified.

Taking down door/window shutters easing & adjusting, refixing in same opening of any description not exc. 1 sqm each complete all as specified.

All as per Srl Item 27 here-in-above but exc 1 sqm and not exc 2 sqm each complete all as specified.

S&F factory made solid panel PVC door shutters 30 mm thick (style) consisting of fram made out of MS tubes for top & bottom rails. MS fram shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the fram at site as per specification & drawing SSR Part II-2020 complete all as specified.

S&F PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS squar tube , fixing in opening as per spesification & drawing complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified.

S&F 125 mm Aluminium handles, cast type, anodised complete all as specified.

S&F 150 mm Aluminium anodised,barrel tower bolts of extruded section complete all as specified.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs hinges lock strike plate etc size of frame 125X60mm complete all as specified.

S&F 2nd class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

S &F 35 mm thick 2nd class hard wood plain framed panelled shutter (any panels) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces including wooden beads on both sides, . The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S & F Mild steel pressed handles oval type size 150 mm , stove enamelled black of complete all as specified.

S & F 200 mm long mild steel tower bolts, stove enamelled black, with bright bolt complete all as specified.

S & F mild steel sliding door bolt 300mm long, plate type stove enamelled black, with bright bolt not less than 12 mm dia with and including a min of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded complete all as specified.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars, dovetailed or welded complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.5 sqm in each pane complete all as specified.

S&F in repair Mild steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron complete all as specified.

M & L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pin primer complete all as specified.

S & F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified.

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified.

S &F 18mm thick solid PVC ply of first quality of both side white colour fixed with screw 'solvent cement/adhesive to make shelves, partitions and drawers etc for kitchen cabinet and cupboards complete all as specified and directed.

S & F stainless steel handle of 110mm size of best quality as per approved sample complete all as specified.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified.

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) is 30mm complete all as specified.

S&F in repair 100mm long Mild Steel Window handles complete all as specified .

S&F in repair 300mm long Mild Steel Casement stays for steel Windows with hinged joint and two plates, with studs complete all as specified.

S&F small fittings such as door & window cleats / stoppers and the like including all necessary labours, articles n. exec 200 cucm each in 2nd class hard wood complete all as specified.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller & roller plate complete fixed to wooden chowkhat or welded to angle iron frame/chowkhats complete all as specified.

S&F in repair 25mm curtain Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified.

S&F in repair for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified.

Taking down old Aluminium door shutters / partition including floor spring etc for replacement of glass pane / rubber gasket / aluminium glazing clip including adjustment of cleat for smooth functioning and refixing in same location complete all as directed. Note :- Glass Pane / rubber beeding / aluminium beeding will be measured and paid separately under subsequent items.

Taking down old Aluminium window/ventilator shutters track / partition etc for replacement of glass pane / wire mesh/ aluminium glazing clip,rubber beading, roller including adjustment of cleat for smooth functioning and refixing in same location complete all as directed. Note :- Glass Pane/wire mesh / rubber beeding / aluminium beeding will be measured and paid separately under subsequent items.

S&F in repair rubber beading for fixing of glass pane in aluminium frame complete all as directed.

Supply and fix in repair aluminium anodised glazing clip to the aluminium frame for securing glass pane complete all as directed.

S&F in repair door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg complete all as specified.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

Material and labour Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, including powder Coating (minimum thickness of powder coating 50 micron), complete all as specified.

S&F anodised Aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified

S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Vitrified ceramic tiles 10mm thick (square/rectangular) light shade area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

Non skid coloured ceramic tiles area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm (400x400) 7 to 8 mm thick in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

Non skid coloured ceramic tiles area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm (600x600) 7 to 8 mm thick joint less in floor/skirting set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floor,apron,roofs laid bedded and pointed in any mortar complete all as specified.

M&L 20 mm thick Granite (of any type/ any colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

M & L reinforced cement concrete 1:2:4 (20 mm graded stone aggregate) type B1 nominal mix as in slab supported on ;walls,beams and column in floor,roof,landings,balconies,canopies,deck slab or as in shelves and chajjas etc complete all as specified.

Use and waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) rough finished flat surfaces complete all as specified.

M & L for mild steel 10mm dia, and over TMT bars cut to length bent to shape as required including cranking bending with MS steel wire (annealed) not less than 0.9 mm dia complete all as specified.

S&F rotational moulded plyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 40x3mm and necessory fittings and including dismantliing existing tank complete all as specified.

S&F rotational moulded plyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 40x3mm and necessory fittingsand incl dismantling existing tank complete all as specified.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210gms) complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Disconnecting existing tanks, exc 250 ltr not exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified.

S&F in repair PVC water tank lid/top cover for PVC Water tank of 500L or 1000L only including locking arrangement for cover/Lid using MS flat 40x3mm and necessory fittings complete all as specified.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down existing tile complete all as specified.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down existing tile complete all as specified.

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of girth exc 10 cm in stone, concrete block or slab wall etc complete all as specified.

S&F Iin repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement complete all as specified.

S&F in repair Soap dish holder (SS), any type, fixed to plugs with chromium plated brass screws complete all as specified.

S & F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified.

S&F in Repair Tubular towel rail, 20mmdia, D type, 60cm long between flanges complete all as specified.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm fixed complete all as specified.

S&F in repair Bib taps, cast copper alloy Chromium plated with crutch or butterfly handle, screwed for iron pipe of 15 mm bore or for brass ferrule and fixed complete all as specified.

S&F in repair 15 mm bore Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair 15 mm bore Stop valves fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type (swan neck ),screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repair vitreous china wash basin white, oval type or flat back of size 580x 450mm including CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements complete all as specified.

S&F in repair vitreous china urinal Half stall type white with grating and union for discharge pipe incl providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl Urinal spreader of PTMT any colour complete all as specified.

S&F in repair PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as specified.

S & F in repair Vitreous China squatting pan, of ‘Orissa pattern ‘ white of size 580 X 440 mm, with integral foot rests and 'P' or 'S' trap including provision of cement concrete (1 cement, 2 sand or surkhi and 5 aggregate) bedding minimum 150 mm thick complete all as specified.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified.

S&F in repairs plastic water closet seat cover (any colours) closed pattern, with mild steel chromium plated or aluminium hinges device complete all as specified.

S&F in Repair 10 Liters PVC valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S &F in repair Stainlees Steel plated rack of size 31" x 30" x 10" made out of 0.63mm thik SS Sheet complete all as specified.

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 495 x 420mm with bowl size 410x330x160mm complete all as specified.

S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovreall size 915 x 460mm with bowl size 410x330x160mm complete all as specified.

S&F in repair wall mixer of bathroom 3 in 1 system with provision for both hand & over head shower ,with 115 mm long bend pipe ,connecting legs & wall flange complete all as specified.

S&F in repair Sink Waste coupling Chromium plated (half or full threaded) for 32mm Bore dia of discharge pipe complete all as specified.

S&F in repair Hand Shower (health faucet) ABS chrome plated with 8mm dia 1.20 meter long flexible tube and wall hook complete all as specified.

S&F in Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, doors chowkats of angle, ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 complete all as specified.

VASUNDHARA AND COMPANY

Rajesh Mishra

m/s shanti consruction co