Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance PATTUKKOTTAI TAMIL NADU | THANJAVUR | TAMIL NADU | 614601 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹3.5 L
EMD Value
₹3,500
Closing Date
9 Jan 2025, 3:00 pmClosed
Executive Officer
TOWN PANCHAYAT MELAGARAM
Removal of Existing Handpump and Providing tank arrangements at 13th ward South street, Kulasekaraperi and Providing Sluice Valve arrangements at Indir Nagar in Melagaram Town Panchayat.
2024_DTP_513908_1
43 10
Open Tender
Civil Works
Works
180 days
Melagaram
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹3,500
21 Jan 2025
25 Dec 2024
9 Jan 2025
25 Dec 2024
9 Jan 2025
25 Dec 2024
Amount
Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales,murram, ordinary earth, earth mixed with 50% fair sized boulders etc., with initial lead and lifts including laying, sprading, levelling sectioning breaking clods etc., incuding all incidential changes complete as per standard specification for foundation SS 20B
Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification
BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for the following including curing etc., complete complying with standard specifications.
PLASTERING walls with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete.
Painting the new walls in two coats with Emulsion paint of approved colour and quality over one coat of primer including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers
Supply and delivery of MS Kiosk of size 0.75m X 0.50m X 0.75M made up of MS angle of size 50mm X 50mm X 4mm alround covered with 16 gauge MS sheet and Kiosk door made up of MS plates of size 25mm X 3mm including cutting, welding, grinding,locking arrangements and labour charges etc complete
Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification
Supply and delivery of 32mm UPVC Column Pipe etc., complete.
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation,and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete
1000 LITRE
Labour Charges for Removal of Existing Handpump from borewell etc., complete.
Supply and delivery submersible pump set with ISI mark IS 8034/2002 including all cost and conveyance of materials to site and all labour charges etc, complete.
Supplying and delivery of PVC Insulated and sheathed 2.5 Sq mm 3 core Flat type copper cable confirming to IS 694 /1990 including cost of materials etc., complete
Supply and delivery of fully automatic 1.5 HP air break auto tranforrmer panel board with single phasing preventory with ammeter voltmeter with auto restart facility including all cost and conveyance of materials to site and all labour charges etc, complete.
Towards labour charges for the erection of 1.5HP submersible pumpset in borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps pressure gauges upto the exterior wall of pump room and erection of panel board consiting of TPICN switches starter, volmeter, ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc, complete and testing the pumpset and trail run for 10 days
Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127.
Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 64
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Plain Cement Concrete 1:2:4 Mix (one part cement, two part M- Sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Supply and delivery of Cuddapah Slab 38 / 40mm Thick etc., complete.
Supplying and Delivery of 100mm CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING with all cost and labour cost etc., complete as per standard specification
M CHINNA THAMBI (BID ID -1225890)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .