Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC 06 GOVIND NAGAR PANCHAYAT USR TRANSPORT CAMPBELL BAY OLD FISHERMAN COLONY CAMPBELL BAY GREAT NICOBAR ISLANDS | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.9 L+₹91,085.80 (3.79%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹25.4 L+₹1.4 L (5.66%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹25.9 L+₹1.9 L (7.77%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹23.9 L
EMD Value
₹47,800
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) Campbell Bay
GE (I) Campbell Bay, Army Land, Great Nicobar-744302
PROVISION OF EQPT STORE AT ARMY LAND UNDER GE (I) CAMPBELL BAY
2022_MES_535142_2
8806/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) Campbell Bay
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (I) Campbell Bay
₹47,800
28 Nov 2022
5 Aug 2022
29 Aug 2022
6 Aug 2022
27 Aug 2022
12 Aug 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified and directed.
Ditto all as per item No 2 but depth exceeding 1.5 m and not exceeding 3 m all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar work vertical or to batter all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete all as specified and directed.
Use and waste of formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat all as specified and directed.
M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.
M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.
M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilevers, bressummers, lintels over 1.5m span, all as specified and directed.
M&L for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in Chajjas all as specified and directed.
M&L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed.
Ditto - All as per ser item No.14 above but 5 to 8mm dia
M&L for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed..
M&L for Anteternite treatment, treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) all as specified and directed.
M&L for Antetermite treatment, treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed.
M&L for Antetermite treatment, treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.
M&L for Antetermite treatment, treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded aggregate , exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W (Gde E-250) quality A
M&L for Rolled mild steel sections conforming to Fe 410 -W (Gde E- 250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates all as specified and directed.
S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed.
M&L for Hard core of gauge n.exc 63 mm , with broken stone or boulders , deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed.
M&L for 75 mm thick PCC 1:4:8 type D-2, (using 40 mm graded aggregate) as in sub base complete all as specified and directed.
M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and directed.
M&L for Rendering 15 mm thick in cement plaster 1:4 on fair faces of concrete surfaces surface finished fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. (Supply only of WPC shall be measured and paid separately).
Supply only of Integral waterproofing compound of approved make all as specified and directed.
M&L for nonskid coloured Ceramic joint free tiles (Matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 over 25 mm thick PCC screed 1:2:4 type B-0 using 12.5 mm graded stone aggregate all as specified and directed.
All as per item No 32 above but on vertical surfaces as in skirtings over 10 mm thick rendering in cement mortar 1:4 all as specified and directed.
M&L for 75m mm thick plain cement concrete type C-1, 1:3:6 mix using 20mm graded stone aggregate as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement including making 6 mm wide grooves to full depth at 2 to 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ration of 1:3 by weight complete as specified and directed.
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
S&F of 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceilings including Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling and applying two coats of OBD over one coat of approved primer over ceiling boards all as specified and directed.
M&L for Preparation of new or previously un treated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of Exterior emulsion paint over a priming coat complete all as specified and directed.
M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed.
S&F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F of Anodised aluminium window and ventilator shutters glazed and gauged, side hung type without sash bars for aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles etc., complete all as specified and directed.
S&F aluminium deco grill of specified size complete including fixing with window frames along with fixing clips and screws etc complete all as specified and directed.
S&F of 4 mm thick Sheet Glass, ordinary quality and glazing with aluminum windows all as specified and directed.
M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions all as specified and directed.
S & F 150mm bore PVC (SWR) pipes as in half round gutters including fixing with PVC Clamps suitable for Non AC sheet roof complete all as specified and directed.
S & F PVC 150 mm dia drop ends/stop end suitable for 150mm half round valley gutters complete all as specified.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S & F PVC (SWR) bends any radius suitbale for 110 mm bore complete all as specified.
M&L for Chequered cement concrete tiles 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed CM 1:6 all as specified and as directed
Material labour for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit on wall/ceiling and terminated to MS box of 1.6 mm thick and 3 mm hlum sheet, switches sockets etc including 1.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly for light/ fan point/ three pin 5 Amp complete a)One light point controlled by one way 5 Amps swtich
b)One fan point controlled by one way 5 Amps swtich
c)One 3 pin socket out controlled by one way 5 Amps swtich on same board
d)One 3 pin socket out controlled by one way 5 Amps swtich on independent board
Material labour for point wiring complete with 4.0 Sqmm PVC insulated unsheathed single core multistranded copper conductor 1100 V grade drawn through in and including 25 mm dia PVC conduit on wall/ceiling and terminated to MS box of 1.6 mm thick and suitable hylum sheet with 3mm thickness for fixing of switches sockets etc including 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly for power point wiring complete
S&F Switch piano, flush type single pole, one way 5 Amp
S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type
S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type
M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to plug sockets and DB's including provision of 1 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete.
S&F Sheet metal enclosure DB 230v,1-Ph,50hz,200Amps bus bar 8-way, double door complete
Supply and fixing 240V, 10 KA miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning
S&F Isolator 230volts, 50Hz current rating up to 63Amps
Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers
S&F of ceiling rose two three terminal surface backallite type complete all as directed by Engr-in-charge.
Earthing for poles & other machinery/ equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed standed conductor 2 core 16 sq. mm nominal cross section in service connections
Govinda Swamy Construction
T.M.RAMANATHAN AND SONS
MAHESWARI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .