PROVN OF HARD STANDING WITH COVERED SHED FOR EYE OPD (BLDG NO-7) AND A BLOCK OF DISPENSARY AT MH MEERUT INCLUDING PROVN OF LAUNDARY PLANT WASHING MACHINE HYDRO EXTRACTOR AND TUBLER MACHINE WITH CABLE AND ACCESSORIES UNDER GE (U) MEERUT CANTT.

Amount

Excavation in post holes ( for similar holes) each n,exc 0.5 cum each hole and getting out , in soft/ lose soil, complete all as specified and directed.

Excavation in trenches n,exc 1.5m wide and n,exc 1.5m in depth for foundation etc or for shafts wells cesspits manhole etc n,exc 10sqm on plan and n,exc m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Returning, filling trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing excavated material n/ soil;exc 50 m and depositing where directed at a level n;exc 1.5 m above the starting point, complete all as specified and directed.

M&L brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete as as specified and directed

M&L Rendering 15mm thick in cm 1:4 on brick/conc surfaces or other than fairface of brickwork with incl admixture of WPC 3% by wt of cement includingfinished even and fair complete all asspecified and direvted.on fair faces of brick work or concrete surfaces

S&F rolled trusses ( framed ), trussed, purlins, crane and fastening feavy bracket framing ( bem, tee,anglechannel or flat sections) including distance pieces cleates etc confirming to Fe 410-W(Gde E-250 Quality), complete all as specified and directed.

M & L preparation of new or previously un treated steel and iron surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces all as specified and directed.

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having a tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screws as specified

Ditto as per above item No. 10 but plain sheet as in ridge all as specified and directed

S&F MS Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to

M&L hardcore of broken stone guage exc. 63 mm but n,exc 150 mm thick deposited spread and levelled in layers n exc 15 mm thick watered and rolled /rammed to a true surfaces , complete all as specified and directed.

M&L cement concrete 100 mm thick type D2 1:4:8 ( 40 mm graged aggregate as in sub base ), complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thck cement screed base incm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirrior polishing , complete all as specified and directed.

M&L preparation of new surfaces of wall and applying two coats of cement base paint over a coat of primer , complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in floors or sub base all as specified and directed.

M& sand filling under floors including watering & consolidation concrete all as specified and directed.

M&L coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed

M&L chequered cement concrete tiles 30X30X25 mmm thick jointed and pointed in neat cement slurry in with grey pigmenet and pigment over and including screed bed in cm 1:6 , complete all as specified and directed.

S&F PVC ( SWR) 110 mm dia pipes single sockets in any length with rubber ring joints laid in trenches or in floor , complete all as specified and directed.

S&F palin galvanised mild steel 0.80 mm thicksheeting in ridges hips velley gutters , drip and staright flashing ( length and girth as fixed ) with grade of zinc coating 275 , complete all as specified and directed.

Supply,fix,testing and commissioning of Industrial Washing Machine 60Kg Front Loading Automatic, auto timed, auto reverse of capacity 60 Kg dry weight basket size 1100X750 mm, volume 735 Ltrs heating options of 24 KW and washing motor capacity of 3 Hp,415 V 3 Phase 50 Hz CYS AC electric supply 1"water inlet connection and 2" drain Auto TimedAuto Reverse Auto Digital Temperature Control with Fully Stainless Steel , complete all as specified and directed and as per manufacturer instructions/manual. Make: XSONI SYSTEMS Model No NXE 60/or equivalent in THE PLANET WASH/ AUGMETIC SYSTEMS

Supply, fix, testing and commissioning of Hydro Extractor Loading Capacity of 30Kg basket size of 700X300 mm with RPM 1000 with electric power of 5 HP motor anf 3" drain pipe Direct drive, high speed, self balancing Auto DC injected brake Auto timed suspensions ensure vibration free and noiseless operations with DC break systems of spinning and as per manufacturer instructions/manual. Model No.NH-30 MAKE: XSONI SYSTEMS or equivalent in THE PLANET WASH/AUGMETIC SYSTEMS

Supply, fix, testing and commissioning of Tumbler30 Kg capacity, semi-automatic PLC operation system, easy to operate, Front loading, Open pocket, Large dia Die pressed, Powder coated door Stainless Steel inner Basket of size 950X825mm volume of 670 ltrs , drive/blower motor 1 HP Outer Body Double walled Glass wool Insulated, Centrifugal High Suction Powerful Blower used, Automatic Control panel for Auto Reverse / Forward Auto Digital Temperature control functions, electric heating cool down feature, with humidity control meter complete all as specified and as per manufacturer instructions/manual. MAKE: Model NXE 30 XSONI SYSTEMS or equivalent in THE PLANET WASH/AUGMETIC SYSTEMS

M & L for sub main wiring with 10 Sqmm nominal cross sectional area, 4 single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 10.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic concealed PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed

Supply & fixing Sheet Metal Enclosures Vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing, 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed.

Supply & fixing MCB, TP, 415 volts of 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed

Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.

M & L Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable). Note :- Punned thickness only will be considered for payment.

M & L Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed.

Supply & Laying jointing, testing and commissioning 70 Sqmm 3.5 core LT XLPE, PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc, complete all as specified and directed.

S & F GI tubing, medium grade of size 25 mm bore fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc complete all as specified and directed.

Gun-metal, globe or gate valves,25 mm with iron wheel head, screwed both ends for iron pipe and fixed as directed by the Engineer-in-Charge.

Material and labour for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement, as directed by the Engineer-in-Charge.

M&L 100 mm thick Cement concrete in sub floors, sub bases, floors and pavings type B-1,1:2:4 (20mm graded aggregate) as directed by the Engineer-in-Charge.

M&L for point wiring with FRLS PVC insulated sheathed copper conducter of size 1.5 Sqmm (nominal area) with multistranded copper conductor drawn through in PVC conduit in wall/floors etc. medium grade of suitable size with all fittings and accessories including cutting chases in wall for fixing rigid PVC conduit and MS galvanised shunk type box covered with laminated PVC sheet fixed with brass screw of suitable size for housing/mounting of switches/sockets including 1.5 Sqmm FRLS PVC insulated sheathed multistandard copper conductor for one light/fan contineous earth wire connected to common earth dolly for one light/fan point control by one switch and making good the distributed surfacess completely matched and finished with existing surfacess including painting of walls etc. all as specified and as directed by Engr-in-Charge.

(a) One light/ fan point controlled by one 6 Amps one way switch

(b) One 3 pin socket out let 6 Amp point on independent board

(c) One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per serial item No 37 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

S&F polycarbonate Switch piano flush type,SP, 6 Amps, one way complete all as specified.

S&F Polycarbonate Switch piano flush type , single pole, 16 Amp, one way (ISI) marked complete all as specified.

S&F socket out let 3 pin , 6 Amps (2 in 1 Multi purpose) flush type controlled by one switch ISI marked make complete all as specified.

S&F socket out let 2 in 1, 3 pin, 6 & 16 Amps flush type controlled by one switch ISI marked complete all as specified.

S& F electronic ceiling fan regulator, rotary 0 to 04 steps, hum free, 100 watt complete all as specified and directed socket type complete all as specified.

S&F polycarbonate insulated body ceiling rose 6A, 65x50mm with three terminals, ISI maked fixed complete all as specified.

Supply and fixing LED light fittings 1x20W 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable suitable size from ceiling rose complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 220 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity SP 6 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specifeied and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specifeied and directed.

S&F Sheet metal enclosures (DB) complete epoxy powder coated distribution box, SPN, 08 ways, 200 Amp capacity, 240 volts, IP-43, metal double door for MCB, grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

Supplying and fixing 16 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, with twin core cable flat or circular complete all as specified and directed.

Arun Construction Co.