24(W)/EDCS/2025-26

Amount

PART-A, Installation of New DT

Safe loading Carriage & unloading of following material from Shahajahanpur/Bareilly store centre to pit site/JE dump store.

New 250 KVA 11/0.43 KVA 3 Phase TF

New 100 KVA 11/0.43 KVA 3 Phase TF

PCC pole 8.5 mtr long

11 kv MS T-off Channel

Top Channel (125*65*2240 mm)

Dropper channel (100*50*2028 mm)

S/S Base Angle (75*75*6*2028 mm) bolt & Nut

Composite polymeric 11 KV Disc insulator 45 KN

Composite polymeric 11 KV Pin insulator 45 KN

ST Pole 9 mtr long

11 KV TPMO

cost of 11 kv fuse set

ACSR Weasel conductor

LT Lead Lt XLPE Cable 1*240 SQ MM

LT Lead Lt XLPE Cable 1*400 SQ MM

MS Earthing Rod (2540*20)

GI Wirse 8 SWG for Earthing

Cost of ABC Cable (3*120+1*95+1*16) SQ MM

Cost of Cable Jointing Kit 3*120 SQ MM

11 KV Disc Fitting

11 KV HT XLPE Cable size 3*120 SQ MM

3 Phase Distribution Box

Stay Set 16*1800 MM

Stay Wire (3.15 MM) 7/10 SWG (GSS wire)

Installation/Laying work

New 250 KVA 11/0.43 KVA 3 Phase TF including mounting all proper connection and installing on plinth.

MOUNTING OF 100 KVA NEW TRANSFORMER AT NEWLY CONSTRUCTED DOUBLE POLE STRUCTURE INCLUDING FIXING ALL REQUIRED ACCESSORIES, MAKING CONNECTION, ENERGISATION, COMPLETE IN ALL RESPECT. (ALL DECENTRALIZED MATERIAL WILL BE ARRANGED BY THE CONTRACTOR)

ERECTION OF PCC SINGLE POLE 8.5 /9 METER LONG, AND FIXING OF NECESSARY SINGLE POLE ACCESSORIES AS PER RESSPO NORMS. (ALL DECENTRALISED MATERIAL WILL BE PROVIDED AND ARRANGED BY THE CONTRACTOR)

11 kv MS T-off Channel

Top Channel (125*65*2240 mm)

Dropper channel (100*50*2028 mm)

S/S Base Angle (75*75*6*2028 mm) bolt & Nut

Composite polymeric 11 KV Disc insulator 45 KN

Composite polymeric 11 KV Pin insulator 45 KN

ST Pole 9 mtr long

11 KV TPMO

cost of 11 kv fuse set

ACSR Weasel conductor

LT Lead Lt XLPE Cable 1*240 SQ MM

LT Lead Lt XLPE Cable 1*400 SQ MM

MS Earthing Rod (2540*20)

GI Wirse 8 SWG for Earthing

Cost of ABC Cable (3*120+1*95+1*16) SQ MM

Cost of Cable Jointing Kit 3*120 SQ MM

11 KV Disc Fitting

11 KV HT XLPE Cable size 3*120 SQ MM

3 Phase Distribution Box

Stay Set 16*1800 MM

Stay Wire (3.15 MM) 7/10 SWG (GSS wire)

Holding Clamps for S/S with bolts & nuts

Stone pad

PG Clamps

SMC Box for 100 KVA DT

Danger board with clamp

GI Barbed Wire

Distribution Box Clamp

Piercing Connector

Suspension Clamps

Dead End Clamp

LT Clamps with N&B

LT T off

Lugs of Suitable Size

Stay Clamp

Stay insulator

Earth Wire Clamp

Concreating of Poles

Concreating of Stay

Eye Hook

Chemical pipe earthing

laying of HDPE Pipe 120 mm with cablel by HDD method as per standard norms

GI Pipe 6'' Dia

Construction of New Plinth for 250KVA & above capacity Distribution Transformers, The size of plinth shall be 2M long 2m wide and the height of the plinth shall be 1.50 M with 20 cm. thick top slab with 02 no. 125x65mm MS channel 2 M long embedded in it. The repairing work includes excavation of earth, laying of brick ballast pad for foundation brickwork, CC and plastering and proper curing. The ratio of cement/course sand/fine sand/brick ballast/stone grit as per RESPO schedule including unloading and Loading of the transformer with complete work in all respect. (All work and material in the scope of the Contractor)

Construction of New Fencing of Transformer. The fencing shall be frame of size 1.5mt x1.80 mt fabricated out of MS angle iron of size 40x40x5 mm having 2 Nos. legs of 45 Cm. long in each frameduly welded and fixed with wire mesh of size 75mm 25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of approx. 20 Nos. bolts and nuts. of 10 mm dia along with cross bracing of 25x5 mm MS flat on every frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast in the size 0.22x0.22x0.45 Mtrs. Every frame after repairing will be painted with one coat of red oxide and two coats of blue synthetic enamel paint of approved make after proper cleaning. The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site. Fabrication and providing of wire mesh fencing frame for gate of size 1.5x180 Mtrs. Fabricated as items no. 2 and fixing of gate frame at each S/S as per site requirement with grouted frame providing 3 Nos. 100 mm size heavy duty hinges duly welded and having suitable locking arrangment and proper painting.( The size may slightly vary according to the plinth)

LT Tailless unit Double Circuit

PART-B, PLINTH & FENCING/EARTHING WORK

Safe loading Carriage & unloading of following material from Shahajahanpur/Bareilly store centre to pit site/JE dump store.

Earthing set Complete

Installation/Laying work

Construction of New Plinth for 250KVA & above capacity Distribution Transformers, The size of plinth shall be 2M long 2m wide and the height of the plinth shall be 1.50 M with 20 cm. thick top slab with 02 no. 125x65mm MS channel 2 M long embedded in it. The repairing work includes excavation of earth, laying of brick ballast pad for foundation brickwork, CC and plastering and proper curing. The ratio of cement/course sand/fine sand/brick ballast/stone grit as per RESPO schedule including unloading and Loading of the transformer with complete work in all respect. (All work and material in the scope of the Contractor)

Construction of New Fencing of Transformer. The fencing shall be frame of size 1.5mt x1.80 mt fabricated out of MS angle iron of size 40x40x5 mm having 2 Nos. legs of 45 Cm. long in each frameduly welded and fixed with wire mesh of size 75mm 25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of approx. 20 Nos. bolts and nuts. of 10 mm dia along with cross bracing of 25x5 mm MS flat on every frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast in the size 0.22x0.22x0.45 Mtrs. Every frame after repairing will be painted with one coat of red oxide and two coats of blue synthetic enamel paint of approved make after proper cleaning. The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site. Fabrication and providing of wire mesh fencing frame for gate of size 1.5x180 Mtrs. Fabricated and fixing of gate frame at each S/S as per site requirement with grouted frame providing 3 Nos. 100 mm size heavy duty hinges duly welded and having suitable locking arrangment and proper painting. (Dimensions and Size of Fencing can vary as per instructed by EE/SDO/JE according to the Site condition/ Plinth dimensions) (All materials will be provided by the contractor.)

Providing and installing of boring type pipe earthing Upto water lever as per norms including complete job (All materials will be provided by the contractor.)

Providing and installing of 11 KV Fuse set at various specified location in area under EDC-Shahajahanpur. Complete work as per standard norms. All materials will be provided by the contractor.

Earthing set Complete

M/s Shubham Traders (BID ID -5546683)

M/S HINA ELECTRICALS (BID ID -5546814)

DURGESH CHANDEL (BID ID -5547542)