Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.2 LAccepted-AOC ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹25.8 L+₹1.0 L (4.16%)Rejected-Finance MONIRAMPUR DASPARA P O BARRACKPORE | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 743101 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹26.2 L+₹1.4 L (5.78%)Rejected-Finance VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L3 | Rejected-Finance Higher rate quoted |
Tender Value
₹30.0 L
EMD Value
₹60,100
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_535892_1
8400-828/E8
Open Tender
Civil Works
Works
270 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹60,100
Yes
15 Nov 2022
5 Jul 2022
4 Aug 2022
5 Jul 2022
2 Aug 2022
19 Jul 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off from the site complete all as specified and directed
M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cemincluding ent slurry and pointed in coloured cement to match the shade using coloured tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for joint free non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
All as per item No 3.00 mentioned here-in-above but as in skirtings/ dado over and including 10mm thick in CM (1:3) complete all as specified and directed
M&L for joint free Glazed ceramic coloured tiles in vertical surfaces (250X350mm) 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match, with backing coat 10mm thick in CM (1:3) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for Vitrified light shade tiles 10mm thick (Square or rectangular) polished, area of each tile n.exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match the shade using coloured tiles laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
All as per item No 6.00 mentioned here-in-above but as in skirtings/ dado over 10mm thick in CM (1:3) complete all as specified and directed
Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc and removing rubbish off from the site complete all as specified and directed.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound on wall complete all as specified and directed (Note: WPC Measured and paid seperately)
Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for 15mm thick in cement plaster CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed
M&L for 10mm thick in cement plaster (1:3) on concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified and directed
M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation complete all as specified and directed
M&L for two coats of oil bound distemper on walls over a coat of alkali resistant primer of newly plastered surfaces inckuding preparation complete all as specified and directed.
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15mm thick Screed bed or backing coat for laying floor finishes in CM (1:6) complete all as specified and directed
S&F urinal spreader CP fixing with 15mm dia pipe complete all as specified and directed
S&F sinks with draining board made of stainless steel 1mm thick kitchen with plug washers & wastes incl bedding in cement mortar, fixing cantilever brackets & connecting union to pipe overall size 915x460mm bowl size 410x330x160mm complete all as specified and directed
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.
All as per item No 18.00 mentioned here-in-above but exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed
Taking down shutter of any description n.exc 1.0 Sqm each complete all as specified and directed
All as per item No 20.00 mentioned here-in-above but exc 1.0 Sqm and n.exc 4.0 Sqm each complete all as specified and directed.
Resecuring or easinig and adjusting with out taking down Shutters of any description n.exc 1 sqm each complete all as specified and directed
Resecuring or easinig and adjusting with out taking down Shutters of any description n.exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed
M&L for 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
S&F 35 mm thick factory made plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed by Engineer-in-Charge.
S&F 2nd class hardwood glazed & skeleton shutters, 30 mm open rebated & prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles & rails & divided into square with plain chamfered or mitred & rebated sash bars any numbers complete all as specified and directed
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing
S&F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet as per specification and drawing.
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaskey, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed
S&F 2nd class hard wood 30mm tgick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed
Repairs to existing Aluminum doors including taking down if necessary, straightening of all damaged sections, refixing the frame and shutter in the same opening including repair/replacement of locking arrangement, hinges, door closer, handles etc complete all specified and directed by Engineer-in-Charge
Repairs to existing Aluminum windows including taking down if necessary, straightening of all damaged sections, refixing of frame and shutter in the same opening including replacement of locking arrangement, rollers etc complete all specified and directed by Engineer-in-Charge
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
M&L for cement concrete tiles of size 30X30cm X25mm thick, with mixture of grey cement and pigments machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick cement screed CM (1:6) complete all as specified and directed
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof ring/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed
M&L for preparing old decorated surfaces of walls and applying one coat of white wash on walls complete all as specified and directed
M&L for preparing old decorated surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed
M&L for preparing old plastered surfaces and applying one coat of synthetic enamel paint on Concrete surfaces complete all as specified and directed
M&L for preparation of old painted surfaces and applying one coat of exterior emulsion complete all as specified and directed
Taking down of steel tubing 15mm dia of pipe and connections removal to store complete all as specified.
Taking down of steel tubing 20mm dia of pipe and connections removal to store complete all as specified.
Refixing of steel tubing 15mm dia of pipe and connections including cleaning for complete all as specified.
Refixing of steel tubing 20mm dia of pipe and connections including cleaning for complete all as specified.
S&F GI Tubes 15mm dia, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed
S&F GI Tubes 20mm dia, medium grade galvanised,with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed
S&F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with capstain head handle, screwed down fixed complete all as specified and directed. (Make: Prayag/Cera/JAQUAR, HINDWARE)
S&F in repairs, pillar taps, 15mm dia , fancy type chromium plated screwed down high pressure with or with out lettered "HOT" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Cera/JAQUAR, HINDWARE)
S&F in repairs, stop valves, 15mm dia, facy type, screwed down, high pressure, screwed both ends for iron pipe or unions etc complete all as specified and directed. (Make: Prayag/Cera/JAQUAR, HINDWARE)
All as per above item No 56.00 mentioned here-in-above but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed (Make: Prayag/Cera/JAQUAR, HINDWARE)
S&F in repair Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F ball brass valves, 20mm, high pressure, with polyethylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified.
All as per item No 57.00 mentioned here-in-above but 25mm complete all as specified and directed
M&L for 32mm Waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and directed.
M&L for 40mm waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and directed.
S&F in repairs 32mm Waste coupling of PTMT suitable for urinals (half or full threaded) (Minimum weight -45 gms) complete all as specified and directed
S&F in repairs Grating round 140mm size of PTMT complete all as specified and directed
S&F in repairs Grating round 140mm size of CP complete all as specified and directed
S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed
S&F in repairs Brass chromium plated shower roses 125mm size complete all as specified and directed
S&F in repairs PVC soap dish complete all as specified and directed. (Make : Prayag)
S&F in repairs PVC connection of 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.
S&F in repairs PVC connection of 15mm size with PTMT nuts of length 600mm long complete all as specified and directed.
M&L for vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, ecuring urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Note: Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
M&L for urinal, bowl type or half stall pattern, basin only including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed
S&F in repairs white Vitreous china pan "Orissa pattern" of size 580 mm x 440 mm with integral foot rests and "P" or "S" trap including provisin of lime concrete bedding complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cisterWash down water closet (Pedestal pattern), complete all as specified and directed.
S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm 1 PVC bib taps complete all as specified and directed (Make : Prayag)
S&F in repairs PVC Washers for 15mm bib taps complete all as specified and directed
S&F in repairs Spindle for 15mm bib taps complete all as specified and directed
S&F in repairs 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and directed.
S&F in repairs internal assembly incl valveless syphon for 10 ltrs PVC flushing cistern complete all as specified and directed
S&F in repairs handle for 10 ltrs PVC flushing cistern complete all as specified and directed
S&F in repairs inlet ball valve for 10 ltrs PVC flushing cistern complete all as specified and directed
S&F in repairs float for 10 ltrs PVC flushing cistern complete all as specified and directed
S&F in repairs down take pipe 32mm dia PVC flexible type for wash hand basin complete all as specified and directed
S&F in repairs down take pipe 40mm dia PVC flexible type for sink complete all as specified and directed
S&F in repairs Towel rail, 60cm long including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engineer-in-Charge
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.
All as per item No 88.00 mentioned here-in-above but 110mm complete all as specified and directed.
S&F PVC (SWR) reducers 110mm complete all as specified and directed
S&F PVC (SWR) 'P' trap 125/110mm complete all as specified and directed
S&F PVC (SWR) 'P' trap 110/110mm complete all as specified and directed
S&F PVC (SWR) 'S' trap 125/110mm complete all as specified and directed
S&F PVC (SWR) 'S' trap 110/110mm complete all as specified and directed
M&L for PVC(SWR) floor trap, plain with grating including jointing with plain cement for 63mm complete all as specified and directed
M&L for PVC(SWR) floor trap, plain with grating including jointing with plain cement for 75mm complete all as specified and directed
M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and directed by Engineer-In-Charge.
M&L for rendering 10mm thick in cement mortar 1:4 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed
M&L for applying evenly a priming/tack coat with bituminous primer at 10 KG per 10 Sq.m complete all as specified and directed.
M&L for sand filling under sunken floors or in foundations including watering and consolidation all as specified and directed.
M&L for PCC 1:5:10 Type E-2, (using 40mm graded stone aggregate) as in filling in Sunken floor complete all as specified and directed.
S&F in repairs second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n.exc 200 cu cm each complete all as specified and directed.
S&F first class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store complete all as specified and directed.
S&F in repairs 100mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 300mm long alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
S&F in repairs 250mm long alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
S&F in repairs 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed
S&F in repairs 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed
S&F in repairs Continuous (piano) hinges, mild steel, bright finish or galvanised width of flaps when open 30mm complete all as specified and directed.
S&F in repairs Mild streel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs 150mm long Extruded aluminium alloy handles, fabricated type, handles, cast type anodised complete all as specified and directed
S&F in repairs 100mm long Extruded aluminium alloy handles, fabricated type,anodisedaluminium, handles, cast type anodised complete all as specified and directed
S&F in repairs Gate and shutter, hooks and eyes100mm size aluminium plate type-II complete all as specified and directed
S&F in repairs Gate and shutter, hooks and eyes150mm size aluminium plate type-II complete all as specified and directed
S&F in repairs Hasp and staple, aluminium anodised safety type with hinge pin incl bolt to hinge plate with screw 75mm size complete all as specified and directed.
S&F curtain rod of 18mm dia MS, CP with fixing brackets, stops, rollers etc as fixed in repairs complete all as specified and directed by Engineer in charge
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in square n.exc 0.5sqm in each panel complete all as specified and directed (Note: Beads will be measured and paid under separate item).
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in square exc 0.5sqm in each panel complete all as specified and directed. (Note: Beads will be measured and paid under separate item).
All as per item No 123.00 mentioned here-in-above but frosted glass on one side complete all as specified and directed.
M&L for aluminium extruded Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed in repair complete all as specified and directed
M&L for repairs to rolling shutters of any description by taking down laths and servicing including necessary welding, greasing and replacing unserviceable components for smooth functioning and applying one coat of synthetic enamel paint and making good surfaces of brick wall or concrete surface in CM (1:3) or PCC 1:2:4 type B1 complete all as directed (Note: Component will be paid separately)
Supply only MS spring for rolling shutter of 45 cm long and n less than 5KGs complete all as specified and directed
Supply only laths 1.5mm thick suitable to size of rolling shutter complete all as specified and directed
Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed
Ball bearing 450mm long for rolling shutters complete all as specified and directed
M&L for servicing of collapsibile gate including taking down if required, straighteneiing of verticle guide channel, rollers, riviting where necessary including cleanong and greasing for smooth function complete all a specified and directed
Repairs to aluminium doors, windows, ventilators etc by replacing its faulty parts to bring its functional conditions complete all as specified and directed by Engineer-In-Charge
S&F in repairs Floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overal length of cover plate complete all as specified and directed
S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed
S&F in repairs brass Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed
S&F Mortice lock, brass vertical type, size 100 mm verticle type 4 lever complete all as specified and directed
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. (Make: Jaquar/Hindware/Cera/Parry ware)
S&F Brass CP bracket fancy type suitable for fixing of 25 mm dia curtain rods complete all as specified and directed.
S&F in repairs MS drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed.
S&F in repairs MS PVC sheeted/powder coated bracket size 150 mm made to shape suitable for holding curtain/drap drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) curtain rod or railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. (Make : M/s Jindal or equivalent approved by the GE)
Cleaning of blockage in the floor/nahni traps in kitchen or bath room or sinks upto gully traps by manually or with water jet after carefully removing the old gratingw and refixing the grating in the same position including finishing with white cement complete all as specified and as directed by Engr-inCharge.
Cleaning of blokage in the WC 'P' traps in toilets upto 1st manhole by manually or with water jet carefully removing the connected caps of pipe and refixing the same in the position complete all as specified and directed by Engr-inCharge. (Notes : The works/item mentioned at Sl item No 01 to 144: - 1. The contractor or his represantative will report in complaint cell with minimum one plumber, One carpenter with two helper to receive the complaints in the morning by 0900hrs with necessary daily stores as required to attend day to day complaints. The man power will have to increase depending on the number and urgency as decided by Engineer-in - Charge. 2. The contract will be made operational for 08 months. 3. The complaints should be attended /compete within 48 hours after receiving the complaint slip failing which a penalty of Rs. 250/- per complaint slip will be recovered from runing payment with out any prejudise and contractor shall not have any claim on this account . 4. The cost of plumber & carpenter should be deemed to be included in the item rates quoted by the contractor. Nothing will be paid extra for hiring the skilled labour).
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .