Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.3 LAccepted-AOC | 1 | Accepted-AOC ok | |
| 2 | 2₹17.8 L+₹17,655 (1.00%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹19.2 L+₹1.5 L (8.50%)Rejected-Finance SANDHYA NIWAS MAGADH COLONY ROAD NO 03 SHERGHATI ROAD PS MAGADH MEDICAL COLLAGE DIST GAYA PIN 823001 BIHAR | GAYA | BIHAR | 823001 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹19.7 L+₹2.0 L (11.5%)Rejected-Finance C O MANOJ KUMAR KESHRI MIRA SADAN ROAD NO 03 ANAND VIHAR NEAR WAXPOL FACTORY BOOTY MORE BUTI RANCHI JHARKHAND 834012 | RANCHI | RANCHI | JHARKHAND | 834012 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹20.1 L+₹2.4 L (13.7%)Rejected-Finance D 9 NETAJI NAGAR KANTATOLI COLONY RANCHI 834001 | RANCHI | RANCHI | JHARKHAND | 834001 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT PO- HOTWAR RANCHI Pin- 834012
REPAIR/MAINT OF B/R WORKS AT ARTY BDE AND SIG COY, INF BDE SIG COY, FD HOSP (OTM/MD) ACCNS UNDER GE DIPATOLI
2023_MES_607149_1
8000/1917/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
Deepatoli
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Dipatoli
₹50,000
Yes
10 Aug 2023
30 Jun 2023
24 Jul 2023
30 Jun 2023
22 Jul 2023
15 Jul 2023
Amount
Taking up or down steel tubing and connections including for refixing or removal 15mm borecomplete all as specified and as directed.
All as per item No 01 here0in-before but 20mm bore complete all as specified and as directed.
S&F steel tubing and connection in new or old position to walls,ceiling,floors etc complete all as specified and as directed. 15 mm bore medium grade , with all fittings ,fitted to wall and ceiling or laid in floor complete all as specified and as directed.
All as per item No 3 but for 20mm dia complete all as specified and as directed.
Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth complete all as specified and as directed.
Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and as directed.
Ditto all as per item No 06 but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.
Taking down shutter of any description nexc 1 Sqm each complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and as directed.
Re-securing or easing and adjusting without taking down wooden shutter of any description not exc 1Sqm each complete all as specified and as directed.
Re-securing or easing and adjusting without taking down wooden shutter of any description exc 1Sqm but n exc 2 Sqm each complete all as specified and as directed.
M&L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed.
S&F 35mm thick glazed and skeleton shutters 2nd class hardwood without sash bars complete all as specified and as directed.
S&F 30mm thick glazed and skeletion shutters 2nd class hardwood without sash bars for window,ventilators complete all as specified and as directed.
S&F Glazed and skeleton shutters (30mm thick in 2nd class hardwood) open rebated and prepared to receive glass, gauze, etc(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc for window & ventilators complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail ed or welded all complete all as specified and as directed.
S&F factory made steel ventilators with top hung shutters including hinges,steel peg stay complete all as specified and as directed.
M&L for mild steel works as in hold fast/wind ties etc complete all as specified and as directed.
M&L PCC 1:2:4 type B1 20mm grade aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed.
S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed.
S&F in repair GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples all complete all as specified and as directed.
Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed.
All as per above item No 24 but n.exc 0.5 sqm in each pane of 3mm thick figured glass complete all as specified and as directed.
S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F mild steel sliding door bolts 300mm long complete all as specified and as directed.
S&F in repair mild steel sliding door bolts 300mm long complete all as specified and as directed.
S&F 75 mm Butt hings medium weight cold rolled and mild steel complete all as specified and as directed.
S&F in repair 75 mm long mild steel medium weight collrolled butt hinges complete all as specified and as directed.
S&F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed.
S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed.
S&F 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
S&F in repair 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. .
S&F 100mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
S&F in repair 100mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.
S&F 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F in Repair 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F small fitting shaped door and window stops n'exc 200 cum each of 2nd class hard wood complete all as specified and as directed.
S&F Bath cabinet mirror of size 350 x 450 mm made of PTMT alloy complete all as specified with fancy design.
S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.
S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed. with fancy design.
M&L in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F 15 mm Angle/Stop valves, fancy type chromium plated, or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design.(half turn type) complete all as specified and as directed.
S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design.(half turn type) complete all as specified and as directed.
S&F in repairs Brass CP mixer tap 15mm dia bore (three in one) for mixing hot & cold water screwed down for iron pipe with fancy design complete all as specified and as directed.
S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design complete all as specified and as directed.
S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type) complete all as specified and as directed.
S&F in repair 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed.
Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed.
Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrs complete all as specified and as directed.
Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
S&F in repair vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.
S&F 40 mm low density polyethylene (HDPE) pipes complete all as specified and as directed.
S&F vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest and trap set complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.
Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. (Fixing only rate is included in item No 108 above)
S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified
S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed complete all as specified and as directed.
S&F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass.complete all as specified and as directed.
S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed.
Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
Dismantling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing incl 3 Nos but hings 100 mm long for each door complete all as specified and as directed.
S&F in repairs decorative curtain rod made out of 25 mm dia (outer dia) MS pipe having wall thichness 0.63 mm, PVC coated of any coulor and pattern as approved overall dia 28 to 29 mm, including provn of two nos brackats on each ends and provn of two nos of globe on each ends for each window/door for fixing complete all as specified and directed. with fancy design.
S&F utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 250 mm approved Make complete all as specified and directed. with fancy design.
S&F Corner Glass Shelf 300 mm (with ABS brackets) of size (300x300)mm complete all as specified and as directed. with fancy design.
S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) pipe 75 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed.
S&F PVC(SWR) bends any radius 110 mm dia complete all as specified and as directed.
S&F PVC(SWR) bends any radius 75 mm dia complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and as directed.
Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and as directed.
M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
ditto as per item No 79 above but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.
M&L joint free Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed.
M&L Joint free for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed.
M&L Machine cut kota stone slab flooring 20-25 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and as directed.
All as per item No-83 but here-in-before as in skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed.
M&L Machine cut black Granite stone slab 20 mm thick (as in cooking platform) over 15mm thick (1:6) cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rounding of edges,grinding and polishing complete all as specified and as directed.
Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situations complete all as specified and as directed.
M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed.
Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed.
M&L plain cement concrete, Type D-2, 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.
M&L 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:4:8) type D-2 complete all as specified and as directed.
M&L Cement concrete in floors 40mm thick over sub base (1:2:4) type B1 using 20mm graded aggregate finished even and smooth without using extra cement complete all as specified and as directed.
Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection etc finished cement concrete surface even and smooth without using extra cement all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and as directed.
Excavation in post holes or similar holes each not exc 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and directed.
M&L plain cement concrete, Type C-2, 1:3:6 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
S&F plates (plain or chequered)channels, square cut or notched(odinary and couter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E- 250)
S&F Pre-painted galvatume aluminum zink coating GI based corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.
M&L in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and as directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L rendering on fair faces of brick or concrete work 15mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface complete all as specified and as directed.
M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls after one coat of white primer with and including average 3mm thick white wall care putty to achieve even and smooth surface complete all as specified and as directed.
M&L for preparing newly platered surfaces and applying two coat of distember oil emulsion white or tinted on walls complete over one coat of primer on walls all as specified and directed.
M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on walls/ceilling complete all as specified directed.
M&L for complete removal of existing treatment and applying two coats of distember oil emulsion white or tinted on walls complete over one coat of primer including one coat of 3mm thick wall care putty on walls all as specified and directed.
M&L Rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparing newly platered surfaces and applying two coat of distember oil emulsion white or tinted on ceiling complete over one coat of primer all as specified and directed.
M&L rendering on fair faces of brick or concrete work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cement for external surface complete all as specified and as directed.
M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint after one coat of white primer complete all as specified and as directed.
M&L for preparation of old decorated surface of walls rubbing, watering etc and applying one coat of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja ( ceiling) surfaces complete all as specified directed.
M&L preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed.
M&L for preparation of previously treated/ old painted surfaces of wood or wood based materials including for knotting and stopping (of any description) over 10cm width or girth and applying one coats of synthetic enamel paint all as specified and directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 including concrete work for RCC chajja, fins, facia ceiling of chajja and like not exceeding 60 cm wide including necessary formwork, scoffolding, finished even & smooth without using extra cement complete all as specified and directed.
Dismantling of boarding any description, fixed in any position with screws all as specified and directed.
S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed in repair to timber frame work all as specified and directed.
S&F 30 mm continous (piano) hinges mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F 75 mm Hasp & staple MS stove enammeled black , including bolt to hinge plate and fixed with screw complete all as specified and as directed.
S&F 40mm dia , cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed.
Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design.
M&L for powder coated alumunium chowkhat of size 0.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed.
S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed.
M&L machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness , M-35 Grade laid over and including 25mm thick sand cushioning all as specified and as directed.
M&L for spreading and levelling of sand in layers n exc 25cm thick over sub base complete all as specified and as directed.
Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed.
M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6). complete all as specified and as directed.
M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM(1:4) complete all as specified and as directed.
M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast manhole covers including necessary form work and setting in CM 1:4 complete all as specified and directed.
M&L for roof treatment in repair by complete removal of existing old treatment and Brushing neat cement slurry with 3.0kg of cement per sq. Metre complete all as specified and as directed.
M&L for 15 mm thick in cement plaster even and smooth surface using cement motar (1:4) mixed with integral water proofing compound complete all as specified and as directed.
M&L for Applying oil based bitumen primer @ 0.30 ltr/Sqm on plasterd surface. for use in waterproofing and damp-proofing treatment complete all as specified and as directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M&L for Appling two coat of aluminium paint @ 200 gm /sqm over bituminous surface of membrane complete all as specified and as directed.
Supply ony integral water proofing compound complete all as specified and as directed.
M&L for sunken floor treatment by taking down of damaged IWC, demolition of PCC in sunken floor filling, cleaning the surface and carrying out treatment with 15mm thick plaster in CM 1:2 with WPC, applying a coat of hot bitumen of grade 85/25 @ 0.7 kg/Sqm over a coat of bituminous primer @ 0.50Kg/Sqm, pasting a layer of polythene film of 150 micron, fixing 25mm dia GI pipe of 45 CM long S&F new IWC 'ORISSA' pattern of 580x440mm with intergral footrest, with trap and providingPCC lean concrete in Mix 1: 5 : 10 complete all as specified and as directed.
M/S RAMOTAR SAHU
M/S SURYA BUILDERS
M/S.R.S.Chauhan and Sons
M/s Kundu Enterprises
universal enterprises
M/S Sweta Construction
united builders
Delhi Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .