Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical 53 VAISHAILI ENCLAVE SECTOR 9 INDIRA NAGAR LUCKNOW | LUCKNOW | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 4 | Admitted-Fee/PreQual/Technical 2ND F 140 NEHARU NAGAR GHAZIABAD GHAZIABAD UTTAR PRADESH 201001 | GHAZIABAD | UTTAR PRADESH | 201001 | Admitted-Fee/PreQual/Technical |
| 5 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹3.2 Cr
EMD Value
₹6.3 L
Closing Date
25 Sept 2026, 5:00 pmClosed
SM_TENDER CELL
GNIDA OFFICE
Providing Street Light with Chonical Arch Pole from Greater Noida Entry Point Near Chaar Murty Rotary to Ek Murti Rotary on 130 Meter wide Road, Greater Noida.
2026_GNIDA_1185538_23
SM/(E-TENDER CELL)/2026/811 DATED-10.09.2026
Open Tender
Electrical Works
Percentage
180 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹4,930
₹6.3 L
28 Sept 2026
15 Sept 2026
28 Sept 2026
15 Sept 2026
25 Sept 2026
15 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | BOQ | - | - | - | - |
| - | SITC of Supply and fixing of 9000mm Conical Arch pole made of Continuously tapered circular Hot rolled steel curved pipe (E250 to IS 2062: 2011) 175-185mm Bottom Dia x 76mm Top Dia x 3mm thick with 8984mm Height. Wind speed considered in design 167Km/Hr in compliance with IS 875 Part 3: 1987. The angularly projecting arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from conical pole, facilitates the fitment of street light luminaire at 1604mm from the vertical axis of the pole. Pole section welded by certified welders using high end MIG welding processes. MS service door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A+B7 stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062: 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. | - | - | - | - |
| - | The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimensions are within +/- 5% tolerance. After fabrication, entire pole is shot blasted. The pole is coated pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options Including nut and bolt, 1:2:4 RCC Foundation, excavation, back filling as per give GA drawing all, t&p material etc complete in all respect as per direction by E/I. | 302 | Nos. | 45,136.79 | ₹1,36,31,310.58 |
| 2Supplying. Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, intemal surge protection of 5 KV L,N,E as per IEC 61000-4-5. Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F20.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/11/111 as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K 14000°K 15700°K /6500°K (As per ANSI Bin), | |||||
| - | SDCM(Standard Deviation Color Matching) <5. Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 Im/VValt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
DSR(E) 2015 / Sl. No. 8.14.19 | - | - | - | - |
| - | 200 Watt Each | 302 | Nos. | 5,305 | ₹16,02,110 |
| 3Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD 2018 / Sl. No. 501 | |||||
| - | 16 sq. mm 4 core (i) | 9,060 | Mtr. | 343 | ₹31,07,580 |
| - | 35 sq. mm 3-1/2 core (L) | 3,000 | Mtr. | 422 | ₹12,66,000 |
| 4Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. UPPWD 2018 / Sl. No. 503 | |||||
stage.html
html • 0.02 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.48 MB
PreQ_Pro_Stre_Ligh_conical_pole_chhar_murti_ek_murti_rotary.pdf
Tender Documents • 1.65 MB
BOQ_2231170.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .