PLENARY B/R REPAIR WORKS TO BUILDING OF JCOS/ORS/FAFAS MD ACCN AT JOGINDER SINGH ENCLAVE UNDER AGE B/R I AT NEW CANTT PRAYAGRAJ

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L for Reinforced cement concrete 1:1½::3 M-20 using 20mm graded crushed stone aggregate as in chajjas beams lintels cantilever fair finish using necessary form work complete all as specified and directed . Note:- Formwork shall be measured & paid separately under respective item.

Cutting channels, grooves or rebates n exc 15cm girth where reinforcement is cut through not exceeding 15 cm girth and trimming surface complete all as specified and directed.

Use & waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns, hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of brick wok built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified and directed.

M&L for brick work with sub class B, bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc, including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 in two layer (First coat 10 mm thick & second 5 mm thick) mixed with water proofing compound @ 3% by weight of cement in top layer as in window projection / chajjas/ slab/ beam, seeping internal / external wall at any position height upto 10 mtr from floor level & finished surface even and smooth without using extra cement complete all as specified & directed. Note:- WPC will be measured & paid separately.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 on ceiling surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

Demolition of mud phuska from roofs of any thickness ( whether full thickness removed or part thereof ) including dismantling of brick tiles or terracing tiles, single layer on roofs & cement concrete in any description & in any position not otherwise specifically provided and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over existing roof surfaces to slope as per existing including finished the surface even & fair complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in benching coping, lintel and other similar works laid as per slop required finished even and fair complete all as specified and directed.

M&L for water proofing treatment to roof slab with polymeric water proofing membrane after cleaning the surface by wire brushes, brooming, removing dust and applying treatment as under :- (a) M&L for plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement.(b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.30 lit/Sqm and allow to dry.(c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer including cleaning of surfaces .(d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction.(e) M&L for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proofing membrane @ 1.20 Kg/sqm. (f) M& L for blending of course dry sand @ 0.75 Kg/Sqm

M&L for cement concrete tiles of size 25cm X 25cm X 20 mm thick factory made machine pressed conforming to IS-1237: 1980 laid over and including 20 mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing compound and the joints of tiles shall be filled with polymer based cement proof joint filler (manufactured by approved company) on accessible roof area complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

M&L for cutting out cracks to V- section in existing roof or terrace cleaning grouting with slurry of cement & sand in 1:3 complete all as specified and directed.

M&L for cutting out cracks to V- section in existing roof or terrace cleaning out and filling solidly with a hot mixture of bitumen & clean dry sand in 1:1 (by weight) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non- skid vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) scratch free, acid resistance , area of each tiles exc 0.18 and n.exc 0.36sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M & L for joint free non skid coloured ceramic coloured floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc 0.18 Sqm as in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 mm x 450 mm , first and premium quality, 7 to 8 mm thick in vertical surfaces skirting, dados, risers to steps, etc and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10 mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for 20 to 25 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2, using 40 mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for 60 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded interlocking paver block/tiles Coloured any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25 mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for chequered cement concrete coloured tile 30cm X 30cm X 20 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc including cement mortar bedding ( but not backing), removing from site and rubbish off the premises complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including moulding the edges etc, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for water proofing treatment to sunken portion including demolition of existing cement concrete consisting of the following operation:- (a) Cleaning of surfaces by wire brushing, booming & removing all dust particles from surface. (b) Applying two coat of Fosroc Brush bond 2 component POLYMER MODIFIED CEMENTITIOUS water proof coating with proper overlapping when the coating is green all as specified. (c) Laying of water proof protective layer of 15mm thick cement mortar screed in the ratio of 1:4 mixed with and including integral water proofing compound Fosroc Conplast WL as per manufacturer instruction, finishing the surface even and smooth without using extra cement.

M&L for water proofing treatment to top surface of sunken floor including demolition of existing surface of tiling work & consisting of the following operation:- (a) Cleaning of surfaces by wire brushing, booming & removing all dust particles from surface. (b) Applying two coat of Fosroc Brush bond 2 component POLYMER MODIFIED CEMENTITIOUS water proof coating with proper overlapping when the coating is green all as specified. (c) Laying of water proof protective layer of 15mm thick cement mortar screed in the ratio of 1:4 mixed with and including integral water proofing compound Fosroc Conplast WL as per manufacturer instruction, finishing the surface even and smooth without using extra cement.

M&L for cement concrete 1:5:10, type E2 using 40 mm graded aggregate as in sunken filling and mass concrete works complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S& F Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs, benching on roof slab and other similar works laid as per slope required finished even and fair complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning and removing from site complete all as specified and as directed

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning and removing from site complete all as specified and as directed

S&F 15 mm bore GI steel tubing "medium grade" galvanised ISI marked with all fittings and fixed to wall, floor and ceiling etc including cutting chases, making grooves in brick wall complete all as specified & directed.

S&F 20 mm bore GI steel tubing "medium grade" galvanised ISI marked with all fittings and fixed to wall, floor and ceiling etc including cutting chases, making grooves in brick wall complete all as specified & directed.

S&F in repair 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs rotational moulded, multilayer HDPE water storage tank triple layer white colour of 500 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball of minimum weight 210 gms and refixing of inlet, outlet & overflow pipe etc complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, 32 mm dia polythene high density flush pipe & brackets complete set all as specified and directed.

S&F for in repair vitreous china wash and basin, white, flat back, size 580 mm x 450 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand including waste pipe, waste fitting, pipe and union , cutting for and pinning in ends of bracket complete all as specified and directed.

S&F 15 mm dia mild steel chromium plated health faucet (ABS body) with 1.25 m long flexible pipe with ABS wall hook including making connection with all fittings complete all as specified and directed.

S&F in repairs fancy type pillar tap 15mm bore swivel spout deck mounted cast copper alloy with capstan heads, chromium plated, screwed down, high pressure for iron pipe complete all as specified and directed.

S&F bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories fixed in repair complete all as specified and directed.

S&F in repair 15mm bore chromium plated concealed stop cock , long shank cast copper alloy with wall flange including all accessories, fancy type, complete all as specified and directed.

S&F in repair two way bib tap with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S & F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed.

S&F in repair stop valve copper alloy down, high pressure with crutch or butterfly handles screwed down both ends for iron pipe or for unions for 15mm dia of pipe complete all as specified and directed.

Repairs only to chromium plated long body bib taps, pillar tap, bib tap etc of any make by replacing spindle, nipple, washer, knob etc at any size complete all as specified and directed.

S&F of PVC flush pipe 32 mm dia for low level flushing cistern, fixed in repairs complete all as specified and directed.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore fancy type and fixed (Minimum weight 15mm 105 gms) complete all as specified and directed.

S&F in repair bib tap , long body of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 120gms) complete all as specified and directed

S&F soap dish disc(oval) type of stainless steel Chromium plated including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

M&L for taking down cement plaster / screed bed including tile , flooring, cement concrete etc and removing the material outside MD land, hacking out and racking out the joints with the wire brush to dry and applying one coat of URP of approved make and cement in ratio 1:1 @ 1 litre / Sqm, after drying the process applying two coats of pidifin2K @ 1 ltr / Sqm on each coat with 4 hours minimum gap is required and 15 mm thick rendering in cement mortar 1:4 on roof / wall surface finished even & smooth without using extra cement complete all as specified and as directed. Note:- The chemical treatment shall be carried out by authorized technicians & 10 years guarantee (from the certified date of completion of work) shall be obtained from the approved company.

M&L for cleaning the damp surface by removing the dust & water, hacking out & racking out the joints with the wire brush to dry and applying transparent water proof adhesive protective coating to crack seal glue forms a waterproof and protective coating over surface area of external / internal wall or ceiling area after apply the resin of adhesive coating directly on surface and wait for 3 hours for adhesive to penetrate the surface after drying of this process applying two more coats to enhance the effect curing of 24 hours is to ensure the form waterproof layer after drying the surface of treated wall / ceiling surface complete all as specified & directed. Make of Chemical :- Dr fixit, Fosroc , Asian Note :- Damp treatment shall be carried out by the authorised technician in presence of the Engr-in-charge. The manufacturer shall give a guarantee for the performance & durability for 5 years. Tenderer is deemed to quote the rate accordingly.

Cutting holes in brick walls built in cement mortar, for inserting hold fasts exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 complete all as specified and as directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F 110 mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement. complete all as specified and directed..

S&F of stainless steel plate rack (utensil rack) of size 900mmx750mm and depth 300 mm made with 1 mm thick stainless steel sheet provided with brass screw including necessary fittings nut/ bolts fixed in repairs complete all as specified and directed

S & F in repairs 600 mm long tubular towel rail , aluminium chromium plated of 20 mm dia, 'D' type complete all as specified and directed.

S&F in repair brass chromium plated shower rose with swivel joint 125 mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Grating doom 100 mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified.

Taking down PVC pipe rain water pipe of any bore & any size or pattern including all fitting head, shoe, band, swan neck, etc complete all as specified and directed.

Dismantling of cast iron pipe or RCC pipe 100 / 75 mm dia and any description etc complete all as specified and directed.

M&L for cast iron pipe 100mm bore Class 'LA' with spigot and socket ends centrifugally cast, in any length, suitable for lead joints, laid in trenches complete all as specified and directed.

All as per Srl item No. 73 above but except pipe complete all as specified and directed. Note:- Old pipe obtained from dismantling shall be reused.

S & F 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bend any radius diminishing pieces or tapers complete all as specified and directed.

S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 100 mm bore cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F 100 mm bore cast iron sanitary connection S branch with branch 370 to 450 mm long excluding joint complete all as specified and directed.

S&F stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 110 mm bore pipes complete all as specified and directed.

S&F stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75 mm bore pipes complete all as specified and directed.

S&F in repair PVC waste pipe 32 mm dia, 90 cm long for wash hand basin complete all as specified and directed.

S&F in repair waste coupling of PTMT ( half or full threaded), 32 mm dia with minimum weight 32 gram complete all as specified and directed.

S&F in repair waste coupling of PTMT ( half or full threaded), 40 mm dia with minimum weight 40 gram complete all as specified and directed.

S&F in repair mild steel angle iron bracket with 25x 25x 3 mm angle iron for WHB including steel painting and making good disturbed surface complete all as specified and directed.

S&F in repair PVC syphoin kit suitable for cistern for smooth functioning complete all as specified and directed.

S&F in repair PVC cover (Lid) for over head tank of capacity 500 / 1000 ltr capacity complete all as specified and directed.

Repairing only leakage of rotational moulded polythene three layer water storage tank position 500 ltr capacity including disconnecting the tank and repaired the leakage portion using M-seal, 2 Nos of 20 to 25 mm GI union and check nut etc complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

M&L for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying 1 - 2 mm thick white cement based wall care putty(Birla/JK white) on the surfaces with uniform thickness & making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat primer of approved shade complete all as specified and directed.

Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying uniform thickness 1 - 2 mm thick wall care putty on the surface and grinding with sand paper, after dry the layer of putty, apply two coats of oil emulsion distemper white or tinted with paint sprayer machine over a coat of chalk whitening of approved shade complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over & including a coat of primer complete all as specified and directed.

M&L for preparation of old surfaces plastered or unplastered surface of wall and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old surfaces plastered or unplastered surface of wall and applying two coat of cement based paint complete all as specified and directed.

M&L for preparation of old decorated surface of walls by scrapping tools/electric hand grinder and applying one coat of white wash on wall with paint sprayer machine complete all specified.

M&L for preparation of old decorated surface of ceiling by scrapping tools/electric hand grinder and applying one coat of white wash on ceiling complete all specified and as directed.

Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying 1-2 mm thick white cement based wall care putty, after dry the layer of putty, apply two coats of exterior emulsion paint (Apex / weather coat) white or tinted with paint sprayer machine over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wooden surface by scrapping tools/electric hand grinder and applying one coat of synthetic enamel paint with paint sprayer machine on surfaces of any description exc 10 cm width or girth complete all as specified and directed.

M&L for preparation of old painted steel surface by scrapping tools/electric hand grinder and applying one coat of synthetic enamel paint with paint sprayer machine on surfaces of any description exc 10 cm width or girth complete all as specified and directed.

S&F in repair stainless steel tubing of 25 mm dia for curtain rod fancy type with brackets including end cap (wall to wall or flush to wall) for securing to curtain rod with both side decorative holder at both ends of curtain rod complete all as specified and specified. Note:- Bracket and decorative End cap shall be measured & paid separately under respective item.

S&F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod complete all as specified and directed.

S & F Stainless Steel bright color decorative corner/end cap for curtain rod complete all as specified and directed.

S&F in repair stainless steel peg set of 6 hook with base plate and fixed to wall / door with rawl plug / SS screw complete all as specified and directed.

S&F in repair 8 mm thick fancy type glass corner shelf 250 mm ( 2 in each pair with CP bracket) complete all as specified and directed

Taking down chowkhat or frame with shutter area not exceeding 1.5 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified & directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) & removing from site complete all as specified & directed.

S&F for Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified & directed.

S&F for Pressed steel frames 105x65mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified & directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and rebated sash bars any number , edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

S&F of 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 5 mm thick leaping alround complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F in repair factory made steel window/steel ventilator made out of MS hollow section 97mm x 39 mm x 1.6 mm thick frame with double shutter (glazed & wire gauged shutters) made out of z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, locking arrangements as per sample approval by GE, provided with knob,10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter four Nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note: wire mesh and sheet glass shall be measured & paid separately under respective items..

M&L for factory made uPVC white colour sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ - 0.2mm), window profile with hollow section with multi chamber. Frame of size 88mm x 52mm, sliding sash of size 42mm x 67mm, sliding mesh Sash of size 42mm x 57mm, sliding interlock (One vertical length in each shutters) of size 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/ - 0.2mm thick galvanised steel Frame of size 30mm x 18mm, 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26 mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (i) The unit rate quoted by contractor shall be deemed to include all other connected accessories. (ii) Area of glass shall be measured & paid separately under relevant item. (iii) Net Opening will be measured lor payment purpose.

S& F 1.25 mm thick mild steel plain black sheet in wall cladding, steel gates / door shutters and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles as required complete all as specified and directed.

S&F framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming to Fe-410 Gde-E-165 fixed as in repair complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in filling in pressed steel door frame complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel pin type B-21 of size 100mm including welding etc complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repair 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repair 150mm size extruded aluminium alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F in repair 150mm long aluminium anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F in repair 100mm size extruded aluminium alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.

S&F in repair 100 mm long aluminium anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 150mm long aluminium alloy floor door stopper of aluminium anodised alloy body and tongue , anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples in repair complete all as specified and directed.

S&F in repair 4mm thick sheet glass ordinary quality plain / tinted and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.

S&F in repair 4mm thick sheet glass figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

S&F in repair rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer complete all as specified and directed.

Supply and fix/fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated with celuka PVC sheet minimum 600 kg / Cbm density grade 1 quality one side prelaminated and other side plain white colour fixed with screw, solvent cement / adhesive and parliyament hinge complete all as specified & directed. Note:- Cup board accessories ie Hasp & staple , piano hinge shall be measured & paid separately. Contractors are deemed to quote their rate accordingly. Fabrication & fixing of kitchen cabinet to be carried out by authorised vendor of manufacturer only.

Supply and fix/fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated with celuka PVC sheet minimum 600 kg / Cbm density grade 1 quality both side plain white colour rigid laminated glossy finish fixed with screw, solvent cement / adhesive and parliyament hinge complete all as specified & directed. Note:- Cup board accessories ie Hasp & staple , piano hinge shall be measured & paid separately. Contractors are deemed to quote their rate accordingly. Fabrication & fixing of kitchen cabinet to be carried out by authorised vendor of manufacturer only.

S&F prelaminated MDF type board 18/19 mm thick, interior grade, decorative type prelaminated on one side with decorative choice lamination and other side balancing white lamination as in Cupboard Shutter / Cupboard shelves including external teak wood lipping 6 mm thick 18 / 19 mm wide fixed with nails on edge complete all as specified and directed.

S&F prelaminated MDF type board 12 mm thick, interior grade, decorative type prelaminated on both side with decorative choice lamination and other side balancing white lamination as in Cupboard Shutter / Cupboard shelves including external teak wood lipping 6 mm thick 12 mm wide fixed with nails on edge complete all as specified and directed.

S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F continuous piano hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 55041.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Anupravesh Enterprises (BID ID -3052856)

M/S VIVEK DUBEY (BID ID -3059017)

M/S SANJAY CONSTRUCTIONS (BID ID -3059089)

HARSH ASSOCIETES (BID ID -3057727)

Technological Associates (BID ID -3056959)