Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC B 12 BASEMENT PLOT NO 19 RETAIL BUSINESS CENTRE ADITYA COMPLEX NANGAL RAYA SOUTH WEST NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.2 L+₹2.4 L (7.43%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹34.3 L+₹2.5 L (7.94%)Rejected-Finance | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹34.6 L+₹2.8 L (8.79%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹36.3 L+₹4.5 L (14.2%)Rejected-Finance H 13 GEETANJALI PARK WEST SAGARPUR NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance other than lowest |
Tender Value
₹44.0 L
EMD Value
₹87,970
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Delhi Cantt-10
GE North Delhi Cantt-10
PROVISION OF INSTALLATION OF 04 X PORTA CABINS AT T 59 BUILDING TIGRIS ROAD DELHI CANTT 10
2023_MES_613368_1
GE/NORTH-65/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE North Delhi Cantt-10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE North Delhi Cantt-10
₹87,970
Yes
25 Sept 2023
11 Aug 2023
13 Sept 2023
11 Aug 2023
11 Sept 2023
29 Aug 2023
Amount
Provn of heavy duty EPS Porta Cabin size 50'x20' with following specification and complete all as per manufacturerer's instructions and as directed. Note:- Manufacturers of Porta Cabin shall be approved by the GE.
M&L for framework made with mild steel hallow pipe, which size 37mm x 37mm 18-20 gauge coated with synthetic enamel primer, infill material of two layer of outside with 6mm cement board and from inside 255mm x 7mm thick PVC panel of 6mm cement board all as specified & directed.
M&L for tharmocol sheet 37mm thick placed between outer and inner layer as insulation layer all as specified & directed.
M&L for Gypsum Board 6 to 10 mm thick in ceiling fixed with GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws complete all specified and directed.
M&L for frame work as in roofing made with 37x37 mm thick mild steel pipe coated with red oxide enamel primer and 0.5mm thick PPGI sheet fixed on the top of frame with fastners and all edges covered with side flashing properly all as specified & directed . Note:- The type of sland will be double sland.
S&F anodised aluminum alloy powder coated standard hollow section for door of size3'x7' including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles (150mm) in each door etc and other accessories complete all as specified and directed .
M&L for PVC frame of size 50mm x 47mm and factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.
S&F for Vitreous china wash down water closet Pan (pedastal pattern) white with 10 ltr flushing cistern and seat cover including all fitting and fixture all as specified & directed. (Qty 02 Nos with CPVC fittings.
S&F in repairs viterous China wash basin, white flat back, size 550mm x 400mm excluding taps, waste chain & plug & procelain stopper but including CPVC fitting, brackets complete all as specified and directed.(Qty 02 Nos with CPVC fittings)
M&L Light shade vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 including and over 100 mm thick sub base PCC type D2 (1:4:8)complete all as specifed and as directed.
Provn of heavy duty EPS Porta Cabin size 30' x 15' with following specification and complete all as per manufacturerer's instructions and as directed. Note:- Manufacturers of Porta Cabin shall be approved by the GE.
M&L for framework made with mild steel hallow pipe, which size 37mm x 37mm 18-20 gauge coated with synthetic enamel primer, infill material of two layer of outside with 6mm cement board and from inside 255mm x 7mm thick PVC panel of 6mm cement board all as specified & directed..
M&L for thermocol sheet 37mm thick placed between outer and inner layer as insulation layer all as specified & directed.
M&L for Gypsum Board 6 to10mm thick in ceiling fixed with GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws complete all specified and directed.
M&L for frame work as in roofing made with made with 37mm x 37mm thick mild steel pipe coated with red oxide enamel primer and 0.5mm thick PPGI sheet fixed on the top of frame with fastners and all edges covered with side flashing properly all as specified & directed. Note:- The type of slant will be double slant.
S&F anodised aluminum alloy powder coated standard hollow section for door size 3' x 7' including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles (150mm) in each door etc and other accessories complete all as specified and directed .
M&L light shade vitrified tile 10mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or beddding layer in cement mortar 1:4 over and including 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specifed and directed.
Provn of heavy duty EPS Porta Cabin size 14'x14' with following specification and complete all as per manufacturerer's instructions and all as directed. Note:- Manufacturers of Porta Cabin shall be approved by the GE.
M&L for framework made with mild steel hallow pipe, which size 37mm x 37mm 18-20 gauge coated with synthetic enamel primer, infill material of two layer of outside with 6mm cement board and from inside 255mm x 7mm thick PVC panel of 6mm cement board all as specified & directed.
M&L for thermocol sheet 37mm thick placed between outer and inner layer as insulation layer all as specified & directed.
Providing and fixing Gypsum Board 6 to 10mm thick in ceiling fixed with GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws complete all specified and directed.
M&L for frame work as in roofing made with 37mm x 37mm thick mild steel pipe coated with red oxide enamel primer and 0.5mm thick PPGI sheet fixed on the top of frame with fastners and all edges covered with side flashing properly all as specified & directed. Note:- The type of sland will be double sland.
S&F anodised aluminum alloy powder coated standard hollow section for door size 3' x 7' including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats, rubber gasket screws, 2 Nos aluminium anodised handles (150mm) in each door etc and other accessories complete all as specified and directed .
M&L for light shade vitrified tile 10mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or beddding layer in cement mortar 1:4 over and including 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specifed and directed.
Provn of heavy duty EPS Porta Cabin size 6'x8' with following specification and complete all as per manufacturerer's instructions and as directed. Note:- Manufacturers of Porta Cabin shall be approved by the GE.
M&L for framework made with mild steel hallow pipe, which size 37mm x 37mm 18-20 gauge coated with synthetic enamel primer, infill material of two layer of outside with 6mm cement board and from inside 255mm x 7mm thick PVC panel of 6mm cement board all as specified & directed.
M&L for tharmocol sheet 37mm thick placed between outer and inner layer as insulation layer all as specified & directed.
M&L for Gypsum Board 6 to 10 mm thick in ceiling fixed with GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws complete all specified and directed.
M&L for frame work as in roofing made with 37x37 mm thick mild steel pipe coated with red oxide enamel primer and 0.5mm thick PPGI sheet fixed on the top of frame with fastners and all edges covered with side flashing properly all as specified & directed. Note:- The type of sland will be double sland.
S&F anodised aluminum alloy powder coated standard hollow section for door size3'x7' including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles (150mm) in each door etc and other accessories complete all as specified and directed .
M&L Light shade vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 including and over 100 mm thick sub base PCC type D2 (1:4:8)complete all as specifed and as directed. Note for srl item No 1 to 04:- The manufecturer's for Porta cabin shall be approved by GE.
Excavation in trenches n. exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc and getting out in soft soil all as specified & directed.
Returning filling in hard/dense soil, including spreading, levelling, watering and well ramming in layer not exc 25 cm in each layer all as specified & directed.
Removing excavated material (soil) not exceeding 50 mtr and depositing where directed complete all as specified & directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.
M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 all as specified and as directed.
M&L for Anti termite treatment at the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all sepecified and directed.
M&L for Anti termite treatment at the backfill in contact with foundation at the rate of 7.5 litre of emulsion per square meter of vertical surface ( Area of sub structure in contact with the backfill to be measured ) complete all sepecified and directed.
M&L for Anti termite treatment at soil along with external perimeter of building at the rate of 2.25 litre of emulsion per meter of the perimeter wall complete all sepecified and directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation complete all as specified & directed.
M&L brick work with sub class B bricks, straight or curved on plan exc 6m mean radium built in CM 1:4 all as specified and as directed.
M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.
Supply and laying jointing 150mm internal dia of corrugated DWCP SN-4 incl testing and laid in trenches to a level on concrete bed complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under and haunching against the side for 150mm internal dia DWCP pipes after they are laid and tested complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping and similar work incl necessary formwork obtain a smooth finishes complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channel drains,side guide wall including all necessary form work complete all as specified and directed
M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, includingforms, moulds, mi- tred/stopped ends etc
Add or deduct for each 25mm girth or part thereof over or under 30cm ditto
Cutting into existing manholes for 150mm bore pipe connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as directed and specified
S&F for pre cast fibre reinforced cement cocrete manhole cover(1st quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall size 500mmX100mmX80mm complete all as specified and directed. all as specified & directed.
S&F surface mounting LED integrated aluminium housing batten luminaire not less than 18 W, 4 feet fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V and all accessories pre-wired including connecting up with copper conductor wire of suitable size with connector block complete all as specified & directed.
S&F surface mounted LED building security light fitting in high pressure die cast aluminium housing not less than 20 watt fixture should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including light grade GI tube mounting size 40MM bracket of suitable size & length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete and one coat of primer and one coat of synthetic enamel paint after coating of primer on GI bracket and pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified and as directed.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed
M&L for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring complete all as specified & directed.
S&F (in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and sheet metal enclosure double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete (Note :- MCCB & MCB SP will be measured seperately)
S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified & directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete:-
SP 5 To 32 AMP
SPN 40 to 63 AMP
Supply and Laying in trenches or fix on pole / wall , passing through pipes etc., LT UG cable, 1100 volts grade, XLPE insulated ,sheathed with multi stranded aluminum conductors, armoured with galvanised steel wire or tape, confirming to IS specifications, of following nominal cross sectons :-
10 sq mm 2 core
16 sq mm 2 core
16 sq mm 4 core
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation of poles/stays/cables etc and getting out in any type of soil all as specified & directed.
M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)
Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed
Supply and fixing 40mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mm x 40mm x 3mm frame for pit cover including testing on completion complete. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, cutting of hole in wall, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed .
M&L point wiring with PVC insulated unsheathed multistranded copper conductor, conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
One light point controlled by one way switch 5/6 amps.
One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.
All as per item No. 39 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.
All as per above item above here-in-before one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board and independent MCB complete all as specified and directed
S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete
S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete
S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete
S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete
S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, 100 watts complete
S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete
The new hut furnitures
CUCKOO ENTERPRISES
R. S. Associates
J.P. Enterprises
M/S Rohit Enterprises
M/S AADI ENTERPRISES
ANANYA ENTERPRISES
MOHIT ENTERPRISES
QUALITY CONSTRUCTIONS CO
THE LOTUS BUILDTECH
M/s Vijay Enterprises
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .