REPAIR/MAINT/REPLACEMENT TO FLOORING, TILING, JOINERY, PLUMBING, CGI SHEETS, SANITARY FITTINGS, ROOFING, STORAGE TANK CLEANING, ROOF TREATMENT AND ALLIED WKS IN CERTAIN BLDGS AT LOWER DAHUNG AND UPPER DAHUNG AREAS OF AGE B/R-1 UNDER GE 859 EWS

Amount

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.

M&L for preparation and complete removal of existing polyster membrane and preparation old plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

S & F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

Demolition of cement concrete (un reinforced) in filling of sunken floors of WC. Taking down existing damaged vitreous China squatting pan & padestal pattern. Taking down existing waterproofing treatment of any description from sides and bottom of sunken floors, roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust, etc, and carrying out the following: - (a) Supply and Fixing of 25 mm bore, galvanized steel tubing, medium grade, 450 mm long as in spout of sunken floor. (b) Rendering, 15 mm thick screed bed or bedding layer of cement mortar (1:2), mixed with and including integral water proofing compound as per manufactures instructions on fair faces of brick wall or concrete surfaces of sides and bottom of sunken floor and finishing surface even and smooth without using extra cement. (c) Providing waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 Kg /Sq M, applying hot applied bitumen 85/25 @ 1.20 Kg/Sq M, providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00 mm thick, weighing 3.50 Kg / Sq M with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction on sides and bottom of sunken floor. Note: - Approx size of sunken floors in WC, 1800 mm (L) X 900 mm (B) X 450 mm (D)

S & F in repairs vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S&F in rep PVC (SWR) WC connector 110mm dia.

S & F in repairs vitreous china squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest excluding flushing cistern and flush pipe including provision of lime concrete bedding

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)

S&F in repair 15 mm dia stop valve external threaded,cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos .

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm.

Supply and Fix in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets complete all as specified and directed(Make: Hindware/Parry)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing rough to receive floor tiles complete all as specfied and directed

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles

M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

Dismantling of wall or ceiling boards any thickness , including cover fillets

Dismantling boarding any description fixed inn any position with nails

M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.

M & L for preparation of wood or wood base materials of any description and girth not otherwise described and treated with two coats of creosote oil

M & L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.

M & L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls

S&F PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls

S&F in rep PVC (SWR) bends any radius, bend 110mm dia with access door

S&F in rep PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.

S&F in rep PVC (SWR) bends any radius, with access door 75mm dia.

S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floorings, including finishing the surface even and smooth using extra cement.

M&L 3mm thick, 38mm wide glass dividing strips inserted in position to conform to design.

M & L 75mm thick, PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in path finished even and fair laid in alternate bays and making impression of expanded metal, while the concrete is green.

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement

S & F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces

Material and labour for providing precast cement concrete block of PCC (1:3:6) type-C1 in masonry with solid blocks, exceeding 10cm in width & set in cement mortar (1:4) complete all as specified and directed.

M & L PCC 1:3:6 type C1, (using 20mm graded stone aggregate) as in surface channels and drains.

Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc.

S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.

Dismantling of water tanks exc 500 ltrs & n. exc1000 ltrs capacity and removing to store.

S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified. (Make : Sintex/Polycon /Poly Tap )

S & F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified. (Make : Sintex/Polycon /Poly Tap )

S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repairs fancy type 20mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repair chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make : Jindal/Leader/Scico)

S & F in repair chromium plated 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

S & F 25mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

Material and labour for prelaminated particle board 18/19 mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in pelmet boxesetc complete all as specified and directed.

S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed

S&F in repair hasp and staple 125mm safety type, aluminium anodised fixed with screws.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L 10mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement

Material and labour for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement.

M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with WPC @ 3% by weight of cement finishing the surfaces even & fair.(WPC will be measured and paid separately)

Supply only integral water proofing compound.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer.

Preparing newly plastered surfaces of ceilings and applying three coats of white wash.

Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer

Disconnecting exc 250 and N.exc 500 Ltrs tank, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnection and re-fixing in position. Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc.

Supply and fix in repair 15 mm bore ,Angular stop cock ,fancy type cast copper alloy CAT NO- SL 5031 of (makes- SONA screwed down ,high pressure crutch (or) butter fly handle screwed both ends screwed for iron pipe or unions complete all as specified and directed

S & F Box type steel windows/ventilator with side hund shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

PCC type C-0 (1:3:6) using 12.5 mm graded stone aggregates as I filling of MS sheet chowkats, complete all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down shutters repair and refixing in same opening area not exceeding 1.0 Sqm

Taking down shutters repair and refixing in same opening area exc 1.0 sqm but not exceeding 2.0 Sqm

S&F in repair PTMT Grating doom 100 mm dia

S&F in repair PTMT Grating doom 125 mm dia

M/S SM ANSARI

M/S SONAM CONSTRUCTION

M/S ASHOK CONSTRUCTION

M/S POLAR AGENCIES

M/S R.N ENTERPRISE

D.P. Traders