Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.5 L+₹10,661 (3.14%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
3 Sept 2024, 3:00 pmClosed
Executive officer
Annur Town Panchayat
Maintenance and Repair Work at Ward No.2.KuttaiPudur Public Toilet in Annur Town Panchayat
2024_DTP_479874_1
84/2024/A2
Open Tender
Civil Works
Works
120 days
Annur Town Panchayat
as per norms
1 document required · 1 mandatory
₹0
₹9,000
15 Oct 2024
2 Sept 2024
3 Sept 2024
2 Sept 2024
3 Sept 2024
2 Sept 2024
2 Sept 2024 - 3 Sept 2024
Amount
Dismantling the Existing damaged PCC including cost of all laboure charges etc.complete
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B
Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Plastering with cement mortar 1:3 ( One cement and three sand)10 mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification
Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Plastering with cement mortar 1: 5 mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification
Supply and fixing in position 22" Indian type water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.
Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.
Providing UPVC (Un-Plasticized Polyvinyl Chloride),Door: Providing and fixing casement doors fabricated,from un-plasticized polyvinyl chloride (uPVC) sections.,Profiles: The profiles should be three chamber system,which provides high insulation properties with outer,frame 60mm x 55mm with an outer wall thickness of,2.4mm. The window unit should be designed with all,corner joints mitred and fusion welded. Windows,should be steel reinforced with 25 x 24 x 25mm steel,reinforcement with a thickness of 1mm to have,dimensional stability. The sash should be of 60 x,102mm. The mullion should be of 60 x 74mm. The,profiles should have co-extruded seals.,Hardware: All the hardware like friction stays, handles,should be screwed with self tapping screws. The,handles, locks should be designed so that they cannot,be released from outside.,Glazing: The window system should be glazed with,5mm plain float glass / 6mm bison lam,Installation: The profiles should be cut to length and,welded 45 degrees. The window should be designed,such that the water drainage does not pass through,the reinforcement chamber. The window system,should be fixed directly to the plastered brick wall,using self expanding nylon plug and driving ms,electroplated screws into plug.
Plastering 20 mm thick with cement mortar 1:5 mix of the following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental Engineers.
Supplying and fixing of steel ventilators, door, window, grill gate using 25x25x3 mm L angle side frame with cross bars and GI sheet 1.6 mm thick including all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.
Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.
Supply and delivery and fixing of HDPE tankas per IS 12701 / 1996 including loading,unloading, transportation and labour,charges for fixing of the GI pipes and specials for pipe connection works including,cutting, threading and fixing charges etc.,(1000 Litres)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable,PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of,suitable colour for open PVC light point / fan point (SD 18)
Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60W bulb -SD-84
Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD-68
Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.
Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete
Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.
THIRUMURUGAN ASSOCIATE (BID ID -1126949)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .