Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.1 LAccepted-AOC 1 28 NORTH STREET SOUTH VILAYANARAYANAM NANGUNERI TALUK TIRUNELVELI DIST 627 118 | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627118 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.8 L+₹2.2 L (5.01%)Rejected-Finance KALIAPPA COMPLEX THRICHY ROAD RANGANATHAPURAM SULUR COIMBATORE 641 402 | COIMBATORE | COIMBATORE | TAMIL NADU | 641402 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹50.4 L+₹5.9 L (13.3%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹60.5 L+₹15.9 L (35.8%)Rejected-Finance 7 345 C 1 AERO NAGAR KANGEYAMPALAYAM KADAMPADI SULUR COIMBATORE TAMIL NADU 641401 | COIMBATORE | TAMIL NADU | 641401 | L4 | Rejected-Finance Not being L1 | |
| 5 | Rejected-Technical NO 12 25 26 KATHIRAVAN NAGAR MAHALINGAPURAM PO POLLACHI COIMBATORE 642 002 | COIMBATORE | TAMIL NADU | 642002 | - | Rejected-Technical Rejected since not enlisted in c(i) category as per NIT |
| Sl No | Description | Qty | Unit | SUPER COOL L2 | sri manikandan enterprises L1 | p.chinnasamy L4 | AnnaiEnterprises L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Material & Labour for dismantling of electric driven horizontal induction motor of capacity up to 5.0 HP of any type and make, by engaging sufficient man power and suitable T&P to ensure safety of pump-motor as well as working persons including disconnecting of electric connections, dismantling of motor, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, bush, thrust plate, thrust bearing, connector plate, insulating materials such as insulating sheets insulating paper (Class "F"), sealing compounds etc and reassembling the motor after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the motor in original location, checking the alignment, making proper electric connection, testing for smooth operation, complete all as directed.
Note : (i) The cost of winding wire and all replaced defective parts are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. (ii) The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor to complete the job at site or at repair shop and no extra cost shall be paid to the contractor in this effect. | 2 | Each Job | 4,500 ₹9,000 Lowest | 9,500 ₹19,000 | 7,000 ₹14,000 | 9,500 ₹19,000 |
| 2.00 | All as per serial item no 01 here-in-above but for 7.5 HP capacity | 3 | Each Job | 17,000 ₹51,000 | 13,500 ₹40,500 | 20,000 ₹60,000 | 13,000 ₹39,000 Lowest |
| 3.00 | All as per serial item no 01 here-in-above but for 10.0 HP capacity | 2 | Each Job | 23,000 ₹46,000 | 18,000 ₹36,000 Lowest | 30,000 ₹60,000 | 18,000 ₹36,000 Lowest |
| 4.00 | All as per serial item no 01 here-in-above but for 12.5 HP capacity | 2 | Each Job | 27,000 ₹54,000 | 20,000 ₹40,000 Lowest | 25,300 ₹50,600 | 21,000 ₹42,000 |
| 5.00Servicing/overhauling of centrifugal pump set by dismantling completely and replacing unserviceable ball bearing, shaft sleeve, gland neck ring gland rope, nut and bolts, impellers etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump and necessary alignment etc with Two coat enamelled paint including scraping complete and written MES/SM, testing and commissioning complete all as specified and directed Note: (i) Spares shall be included in the quoted unit rate. (ii) Painting and writing shall be included in the quoted unit rate. (a) Maintenance schedule :- (i) Checking for looseness of all the foundation and coupling nuts/bolts and rectification. (ii) Checking of leakage in gland packing, shifting base, bushes sluice valves, gate valves etc and rectification. (iii) Checking for any undue noise of motor pump and rectification. (iv) Checking for proper alignment and rectification. (v) Checking for proper lubrication in bearing and lubricating. (vi) Checking all electrical panel using for pumping for cleanliness and rectification for any looseness burnt redressing etc. | |||||||
| 5.01 | (a) 7.5 HP | 3 | Each Job | 13,000 ₹39,000 | 3,900 ₹11,700 | 14,500 ₹43,500 | 3,200 ₹9,600 Lowest |
| 5.02 | (b) 5.0 HP | 1 | Each Job | 11,000 ₹11,000 | 3,890 ₹3,890 | 9,900 ₹9,900 | 3,000 ₹3,000 Lowest |
| 6.00 | Supply & Fixing in replacement, of gun metal gate valve of 32 mm Dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as directed. | 4 | Each | 2,900 ₹11,600 | 1,000 ₹4,000 | 4,000 ₹16,000 | 650 ₹2,600 Lowest |
| 7.00 | All as per serial item no 06 here-in-above but of 40 mm bore size. | 4 | Each | 3,000 ₹12,000 | 1,200 ₹4,800 | 5,200 ₹20,800 | 750 ₹3,000 Lowest |
| 8.00 | All as per serial item no 06 here-in-above but of 50 mm bore size. | 2 | Each | 3,300 ₹6,600 | 1,500 ₹3,000 | 2,600 ₹5,200 | 950 ₹1,900 Lowest |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
14 May 2026, 6:00 pmClosed
GE TIRUNELVELI
Garrison Engineer Naval Post Base Vijayanarayanam Tirunelveli -627119
COMPREHENSIVE MAINTENANCE OF AC PLANTS OF TECH AREA AND TARANGINI AT INS KATTABOMMAN UNDER GE TIRUNELVELI
2026_MES_760602_1
GE/TVL/8616/E8 of 2026-27
Open Tender
Miscellaneous Works
Item Rate
330 days
VIJAYANARAYANAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE TIRUNELVELI
₹1.1 L
Yes
13 Jul 2026
16 Apr 2026
16 May 2026
16 Apr 2026
14 May 2026
7 May 2026
17 Apr 2026 - 1 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material & Labour for dismantling of electric driven horizontal induction motor of capacity up to 5.0 HP of any type and make, by engaging sufficient man power and suitable T&P to ensure safety of pump-motor as well as working persons including disconnecting of electric connections, dismantling of motor, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, bush, thrust plate, thrust bearing, connector plate, insulating materials such as insulating sheets insulating paper (Class "F"), sealing compounds etc and reassembling the motor after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the motor in original location, checking the alignment, making proper electric connection, testing for smooth operation, complete all as directed.
Note : (i) The cost of winding wire and all replaced defective parts are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. (ii) The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor to complete the job at site or at repair shop and no extra cost shall be paid to the contractor in this effect. | 2 | Each Job | - | - |
| 2 | All as per serial item no 01 here-in-above but for 7.5 HP capacity | 3 | Each Job | - | - |
| 3 | All as per serial item no 01 here-in-above but for 10.0 HP capacity | 2 | Each Job | - | - |
| 4 | All as per serial item no 01 here-in-above but for 12.5 HP capacity | 2 | Each Job | - | - |
| 5Servicing/overhauling of centrifugal pump set by dismantling completely and replacing unserviceable ball bearing, shaft sleeve, gland neck ring gland rope, nut and bolts, impellers etc. assembling back the complete pump and fixing alignment to the original position and coupling with pump and necessary alignment etc with Two coat enamelled paint including scraping complete and written MES/SM, testing and commissioning complete all as specified and directed Note: (i) Spares shall be included in the quoted unit rate. (ii) Painting and writing shall be included in the quoted unit rate. (a) Maintenance schedule :- (i) Checking for looseness of all the foundation and coupling nuts/bolts and rectification. (ii) Checking of leakage in gland packing, shifting base, bushes sluice valves, gate valves etc and rectification. (iii) Checking for any undue noise of motor pump and rectification. (iv) Checking for proper alignment and rectification. (v) Checking for proper lubrication in bearing and lubricating. (vi) Checking all electrical panel using for pumping for cleanliness and rectification for any looseness burnt redressing etc. | |||||
| 5.01 | (a) 7.5 HP | 3 | Each Job | - | - |
| 5.02 | (b) 5.0 HP | 1 | Each Job | - | - |
| 6 | Supply & Fixing in replacement, of gun metal gate valve of 32 mm Dia bore size (IS -778) Class 1 with iron wheel head, screwed inside, non-rising stem, complete all as directed. | 4 | Each | - | - |
| 7 | All as per serial item no 06 here-in-above but of 40 mm bore size. | 4 | Each | - | - |
| 8 | All as per serial item no 06 here-in-above but of 50 mm bore size. | 2 | Each | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
8616TenderDocuments.pdf
Tender Documents • 0.52 MB
BOQ_851979.xls
BOQ • 0.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .