WBHF/CMS/HST/16C-02-2018/ DC/2019-21/070/ GROUP-II

Self Adjusting Endodontic file system(SAF SYSTEM) Specification: Digitally controlled endodontic micromotor with peristaltic pump. Self adjusting root canal files, rotary motion with speed and torque control, reciprocating motion with reverse/ forward angular movement

3rd Generation- Apex Locator Specification: with lip clip, colour display module, file clip & associated chord Standard packaging/physical verification of sample may be made

6th Generation- Adaptive Apex Locator Specification: with lip clip, colour display module, file clip & associated chord Standard packaging/physical verification of sample may be made

Acryliser Specification: for 16 flasks or more Stainless steel lined both outside & inside. Temperature is controlled by thermostat from 5°C above ambient to 100°C with a sensitivity of +-5’C with timer can be set 1/2 Hour to 2 Hours. drain valve is provided for dewaxing. To work on 220/230 volts Ac.

Adam’s plier with tungsten carbide tip Specification: For orthodontic work.

Adam’s plier Specification: For orthodontic work. Made of hard tempered steel

Adson Forceps, Toothed Specification: 1.5mm × 2.75mm 1×2 Teeth. 46mm Handle. Made of stainless steel

Adson’s forceps non toothed Specification: of length 12.5 cm Made of stainless steel

Air polisher Specification: air-driven dental air polishing unit withreservoir hand held with connection to dental chair unit. sterilizable up to 275°F (135°C), 44 psi.

Aluminum slide trays Specification: Made of aluminum Tray dimensions: 11.25 x 7.25 x 0.25 in.Holds 20 each of 25 x 75 x 1mm slides

Amalgam carrier Specification: Made of stainless steel

Amalgam plugger Specification: Made of stainless steel double ended

Anatomical articulator Specification: 1. Rust free construction. 2.fixed condylar guidance with spring mounted elements that are attached to upper member 3. incisal pin. 4. mid incisal pin 5. orientation rod,6. incisal guide table 7. Support upper & lower plaster cast

ANTERIOR JACQUETTE Specification: Set of three.( 1 pc straight & two pc curved) Made of High quality Stainless steel.

Apexo elevators Specification: Set of two Set of right & left Made of stainless steel.

Austin’s retractors Specification: L-shaped with one rounded end and one forked end Made of stainless steel

Babcock’s forcep Specification: finger ring, ratcheted, non-perforating forceps used to grasp delicate tissue Made of stainless steel

Band Contouring pliers Specification: For orthodontic work. Made of hard tempered steel

Band cutting scissors Specification: For orthodontic work. Made of hard tempered steel

Band pinching pliers set Specification: Set of 1 piece each ofleft & right For orthodontic work. Made of hard tempered steel

Band pusher Specification: For orthodontic work. Made of hard tempered steel

Band remover anterior & posterior Specification: For orthodontic work. Made of stainless steel

Band seater Specification: For orthodontic work. Made of hard tempered steel

Binocular Compound Microscope Specification: Sharp Image Display with Excellent optical function, Small space occupancy with Integral Stand Design, Low Environment requirement with Anti-mould Technology. Comfortable operation with Ergonomic Design Principle Viewing Head: Compensation Free Binocular Head Inclined at 30o Interpupilary Distance 55-75mm Eyepiece: Wide Field Eyepiece WF10x/18mm with Eye Guard, Achromatic Objective 4x, 10x, 40x, 100x, Focussing Range: Co-axial Coarse and fine adjustment Range 13mm fine division 0.002mm with tension control. Nose Piece: Quadruple Nosepiece, Stage: Double Layer Mechanical Stage 140 x 140 mm/ 75 x 50 mm N.A1.25 Abbe Condenser with Iris Diaphragm and Filter. Focussing: Coaxial Coarse & Fine Adjustment System Range 24mm, Fine Division 2mm Illumination: LED Light with Brightness Adjustable. ISO 13485 OR EC Certificate/directive 93/42/EEC)

Block holders Specification: To be used to hold paraffin blocks and not made of plastic

Blow torch Specification: for casting procedure: Made of non corrosive high fusing alloy Provided with air flow regulator, two separate inlet line for LPG gas & oxygen

Boley Gauge Specification: made of stainless steel for measuring tooth dimensions & others.

Bone expansion and splitting kit Specification: the kit consists of Osteotomes-set of 5-6 of various diameters Spreaders burs surgical for bone removal saw disc thumb driver & rachet autoclavable cassette 1 piece

Bone file Howard type Specification: Straight or curved working ends To smooth bone for better contour of alveolar ridge Crosscut or straight cutting ridges Double ended Made of stainless steel

Bone file Miller type Specification: Double ended Made of martensitic stainless steel

Bone Grafting Syringe Specification: For “Tamp and pack” method for placement of graft material into oral cavity.

Bone rongeur end cutting Specification: Scissor-type handle, cutting edges on top edge of beaks Made of martensitic stainless steel

Bone rongeur side cutting Specification: Scissor-type handle, cutting edges on side and top of beaks

Bone shear Specification: Length 6-8inches.Made of stainless steel

Boon’s gauge Specification: High quality stainless steel framework with minimum marking till 6mm

Bracket debonding plier anterior Specification: For Band removal orthodontic work. tungsten carbide tipped

Bracket debonding plier posterior Specification: For Band removal in orthodontic work. tungsten carbide tipped

Bracket holding tweezer Specification: For orthodontic work. Made of hard tempered steel

Brass flask size no 6 Specification: for acrylic denture fabrication by compression moulding, with detachable upper, body & lower member with keyways. Made of brass

Buck knife Specification: size- ¾ & 5/6 For use in periodontal surgery

Bur chuck for Dental lathe Specification: of different shapes for attaching abrasive stone point, stone wheel & other attachments

Buser bone chisel Specification: 6mm pointed tip Made of martensitic Stainless steel alloy

CAMEL HAIR PAINTING BRUSH SIZE-04

Canine contouring plier Specification: For orthodontic work. Made of stainless steel

Casting ring extra large Specification: casting ring extra large Made of steel for use with centrifugal casting machine Length 4" & Diameter x 4.75"or more

Casting ring large Specification: Made of steel for use with centrifugal casting machine . Length3" & Diameter x 3.75"

Casting ring medium Specification: Made of steel for use with centrifugal casting machine . Length2" & Diameter x 2.75"

Casting ring small Specification: Made of steel for use with centrifugal casting machine . Length1.25" & Diameter x 1.75"

Casting tong Specification: Made of stainless steel or high fusing alloy for holding casting ring

Castrovejo needle holder Specification: Castroviejo Microsurgical Needle Holder is a double spring instrument used for holding small, delicate needles in various microsurgical procedures. It also features a locking mechanism.Made of stainless steel, autoclavable

Castroviejo scissor Specification: Castroviejo scissor has curved blades. Ultra-sharp blades microscopic serrations provide a smooth cut. Spring-loaded knurled handles provide the control you need to make perfectly smooth cuts in delicate materials. stainless steel, autoclavable

Cement mixing spatula Specification: Made of stainless steel double ended

Ceramic sculpturing & finishing kit Specification: comprising of high quality sable hair/ synthetic filament brush size one zero, two zero and four zero and other sizes, ceramic curver, mosquito forcep, tweezer, ceramic pallete for mixing ceramic powder and other associated carving & finishing instruments.

Chandler chisel-with 5mm tip Specification: wide single bevelled blade chisel Made of martensitic Stainless steel alloy

Chanel retractor Specification: length 17.5 cm, Made of stainless steel

Chin retractor Obwegeser type Specification: length 15.5 cm, Made of stainless steel

Chisel curved Specification: Chisel curved 20mm Made of martensitic stainless steel

Circular saw Specification: for dental model cutting: with self illumination Provided with motor driven circular saw blade and cast holding platform, electrically operated motor driven with push button type on off switches.

Clinical micromotor-brushless Specification: Electrically operated with handpiece handpiece autoclavable upto 135 degree celcius, handpiece speed 1000-40000rpm, speed maximum output power 1.2W,3.4-3.5 Ncm torque,with option of clockwise & anticlockwise rotation. Control box and foot control mechanism.

Colorado needle and accessories. Specification: Electrosurgical needle is needle electrode for use in monopolar electrosurgical handpiece made of Tungsten Carbide. COAGULATION TIPS & CUTTING TIPSshould work with most of the diathermy units available in the hospital ,operating frequency above 3 MHZ. ISO/FDA/CE 13485 OR EC Certificate(directive 93/42/EEC)

Composite curing unit system Specification: for indirect composite work chamber provided with sliding tray, provided with multiple halogen or LED lights light intensity not less than 900 mW/cm2Output peak wavelength range 450 - 490 nm (intensity maximum at 460 nm) capable of curing indirect composite veneers/inlays . Curing chamber dimension : Length 10 inches Width 7 inches Height 4 inches or more Electrically operated 220-230 Volts Portable with timer

Cooley Bulldog Clamp Specification: Straight 8.6cm jaw 4.7cm Made of stainless steel

Deleted

Crane Kaplan pocket marker Specification: Pair of two instruments –right & left

Crane Kaplan scaler Specification: double-ended, round handled periodontal instrument for the removal of heavy supragingival calculus. It is a sickle type scaler, with a strong, rigid, sharply angled blade

Crown gauge (Iwanson caliper) Specification: for measuring thickness of wax pattern, metal casting. Both sided scale 0-10mm

Crucible for small casting Specification: Made of fused silica/ceramic material, capable of withstanding high temperature for use with centrifugal casting machine

Curing pressure pot Specification: 5 liter or more capacity pressure pot Temperature is preset to approximately 120˚Fand manually adjusts to a maximum 160˚F. Solid clad bottom provides even heat distribution. Includes an easy-to-read, built-in pressure gauge and quick-release air valve. The pot has a safety device to prevent overheating, and a secure double-locking lid. Easy-to-clean stainless steel interior. Pot holder to keep pot firmly In place. With Lid Gasket

Cushing Nerve Hook Specification: used for the retraction of nerves or delicate tissue during neurosurgery. The instrument has a ball tip to avoid tearing. This #1 hook is angled 90 degrees with a 4mm ball tip and overall length of 7-1/2 inches

Dandy type Nerve hook Specification: Length 16-20cm Tip 4-5mm,deep working tip blunt ended made of stainless steel

Dappen dish made of glass

De La Rosa Wire Contouring Plier Specification: For orthodontic work. Made of stainless steel

Deans scissors: Specification: Scissors with 1 serrated angular blade used for trimming tissue or cutting sutures.

Debackey’s forceps Specification: Length 26 cm, tip width 1.5 mm Made of stainless steel

Debackey’s vascular forcep 6” Specification: Made of stainless steel, autoclavable

DEBAKEY BULLDOG CLAMP 8.5CM Specification: with SERR.JAWS, Straight Made of stainless steel

Dental dewaxing unit Specification: with digital control for water temperature regulation. Construction: Stainless Steel Tank Sizes (300 x 200 x 350 mm) approximately Water Filling: Manual Heater: 2000 watts. With drain valve

Dental excavator discoid type Specification: Made of stainless steel double ended ISO 13397-4:1997

Dental lathe motor Specification: Ac, HP-1, Universal, RPM-2800, Equipped with Double B.B, Single speed, Rating continuous with 3 chucks (Buffer, Stone & Bur Chuck), Three Imported B.B. flexible metal cable arm and its attachment.

Dental muffle furnace Specification: 1150C degree Celsius, working temperature 900 degree Celsius, with ER & digital display Muffle Size 175x175x225mm. 4.0 k.w. capacity

Dental phantom head unit Specification: manikin head fixed with a table, with mounted upper & lower jaw containing screw mounted teeth having 90˚ swiveling function of head unit, provided with control box for micromotor, foot control & micromotor with contra angle handpiece, should have mounted light unit with illumination power not less than 7000 LUX.

Dental Plaster Dispenser Specification: Body made of stainless 304 grade, fitted with digital electronic timer, capacity 5 kg or more. Will dispense premeasured dose of plaster at touch of a button.

Dental Steam cleaner Specification: power 1500W or more, 220V, frequency 50/60hz. Working Pressure: 4-5 bar. Capacity 5-10Litre. with thermostat controller.Device with both steam gun & button/lever controlled steaming attachment with steam regulator. Stainless steel non rusting inner tank body.

Dental surveyor tool kit Specification: tools- analyzing rod multiple undercut gauges carbon marker sheath wax trimmer

Dental surveyor Ney’s type Specification: Dental surveyor Ney’s type Horizontal Platform • Adjustable spindle for the vertical indicator • Survey table that can be locked at any angle. With tools- analyzing rod undercut gauges carbon marker sheath wax trimmer etc Provision for holding micromotor handpiece Standard packaging/physical verification of sample may be made

Dental Tweezer Specification: with horizontal serrations at tip, diamond knurling on the outside for good grip, Stainless steel alloy

Dental Vacuum former machine Specification: Electrically operated, with inbuilt vacuum motor suction unit, heating element with on off switches & adjustable clamping plate. Specifications: Voltage : 230V/50-60Hz Power : 600W-230V Heater : 400W-230V Dimension : L 23-25 cm, W 17-20 cm

Endodontic explorer straight mono angled (Stainless steel), Adult standerd size- to be added

Diamond glass marker Specification: Mounted in aluminum pencil 5 inches (12.7cm)

Die cutting machine Specification: Electrically operated with diamond disc. With adjustable model holder self illuminated chamber

Dingmans retractor Specification: with three blades Made of stainless steel

Distal end bender Specification: For orthodontic work. Made of stainless steel)

Distal End Cutter Specification: tungsten carbide tipped cutter for all types of wire up to a maximum of .021” x .025” (.53 mm x .64 mm)

Deleted

DONTRIX GAUGE Specification: Spring balance type, minimum measurement till 500 Gms To precisely calibrate orthodontic force there are two units of measurement ounce and gram. Measuring range: 0-450g/0-16 Oz. To measure tension and compression force

Double Wax heater pot Specification: with thermostat controlled temperature regulator ELECTRICALLY OPERATED

Dry model trimmer Specification: with attached suction unit

DUPLICATING FLASK Specification: A. Programmable brushless agitator motor Temperature controls for precision warm up and cool down phases Intelligent heating strategy and provision for effective disposal of gel and prevention of nozzle blockage Maintainance of consistent gel quality Voltage: 200230V, 50/60Hz, B. Pressure Compaction unit for duplicating silicone materials Automatic mixing and metering unit for two component silicone material Duplicating Flask: (A) individual aluminium duplicating flask with aluminium top and rubber base and 2 base formers (2 sizes) (B) duplicating flask with stabilizing insert and three replaceable palatal formers of different sizes

Electrically operated wax carver Specification: electrically operated electrical wax curver with thermostat controller. with two detachable carving tools

Electro polisher Specification: Automatic digital electro polisher, Auto/Manual Modes, With trimmers, Electrolyte flow regulation 38 mm disc for PSA paper & cloths Supply 230 V. AC Current – 2.5 Amp., Voltage – 80V, Supply – 230 V.A.C.Polishing probes – Unique Pen Type system with Recirculation of electrolyte, pump 25 watts reservoir (0.5 Ltr)

Endo activator Specification: System kit that includes handpiece/driver box of small, medium & large activator tips. Box of 100 protective barriers. Safe & vigorous energetising intracanal irrigant, Capable of debriding & disinfecting Root canal system

Endodontic microsurgical equipment Specification: Comprising of a. Ultrasonic piezoelectric scaler with inbuilt irrigation , LED & water tank b. Ultrasonic endodontic retro-surgical tips (for anterior teeth upper & lower and posterior teeth of upper and lower arch) c. Ultrasonic passive irrigation, d. set of assorted Ultrasonic tip for instrument retrieval and chasing calcified canal

Endomotor with torque control hand piece. Specification: Continuous &/or reciprocating motions for root canal shaping, Hand piece with integrated on- off switch, auto reverse mode, Speed 250-1200 rpm. Torque range 0.6-4 Ncm, Multiple adjustable programs Standard packaging/physical verification of sample may be made

EndoVac Irrigation System Specification: Multiple Port adapters, Hand Piece set, Extra Evacuation System, cannulas, delivery tips & syringes.

Excavator oval type

Excavator spoon type Specification: Excavator double ended spoon type

EXTRAORAL GOTHIC ARCH TRACER Specification: Jaw movement recording and centric relation positioning, one stylus and one tracing plate attachments to the jaw movement recording bases outside the mouth Standard packaging/physical verification of sample may be made

Farabeufs periosteal elevator Specification: of different sizes- length 6-8inch, width 8-12mm, Made of stainless steel.

Fergusons mouthgag Specification: Made of stainless steel

Fiber optic light Specification: Fiber optic based lighting unit consisting of fiber optic cable, led based portable light with controller unit. With rechargeable battery ISO 13485 OR EC Certificate(directive 93/42/EEC)

Flask clamp for brass flask Specification: Made of steel with clamp compatible with brass flask of size no-6

Amalgam curver Standard size triangular cutting blade, Stainless steel.

Furcation curettes- Quetin Specification: buccal-lingual 0.9mm-1pc Quetin buccal-limgual 1.3mm-1pc Quetin Mesial-distal 0.9mm-1 pc Quetin Mesial-distal 1.3mm-1pc conform to ISO 13485:2003/ EN ISO 13485:2012

Gardner chisel-with 3mm tip Specification: single bevel chisel Made of martensitic Stainless steel alloy

Gates glidden drill set Specification: Stainless steel, drill compatible with latch type handpiece for use in bulk removal of the tooth structure unit pack containing six different sizes each drill having 28-32 mm length.

Gillie’s skin hook- doubleprong Specification: Made of stainless steel

Gillie’s skin hook-single prong Specification: Made of stainless steel

Glass bead sterilizer Specification: electrically temperature regulated to heat contained glass beads with on off switch. Small rectangular base for keeping at chairside Provided with lid. It should reach operating temperature of approximately 240 C to 270 C in 15-20 minutes time. Sterilization is on contact with glass beads Unit can be left in the “ON” position all day and is safe for use in laminar flow cabinets.

Glass slab- 8mm thick Specification: Transparent rectangular Glass slab thickness 8mm, length 6” x 4” inch

Glass slab big Specification: Transparent Square Glass slab thickness 4mm, each side of 6 inch

Glass slab small Specification: Transparent Square Glass slab thickness 4mm, each side of 3.5 inch

GOLDMANFOX Periodontal probe Specification: double ended probe, markings at 1,2,3,5,7,8,9& 10mm.High quality Stainless steel with satin finish, Antimagnetic rust resistant, Acid Resistant

Gracey curette set Specification: of 9 Size ½, ¾,5/6,7/8,9/10, 11/12,13/14, 15/16, 17/18.Made of hard tempered steel Double ended Handle-10.2-10.8cm Shank-3.1-3.6cm Length-6.8-7.4mm Offset blade beveled at 60 -70 degree to the shank 1.triple tempered steel 2.satin steel handle 3.corrosion resistant 4.rust resistant 5.stain resistant 6.can be sharpened by traditional sharpening stones conform to ISO 13485:2003/ EN ISO 13485:2012 ISO 13485 OR EC Certificate(directive 93/42/EEC)CE & FDA APRROVED

Guarded nasal chisel set of right &left Specification: Size : 4, 5, 6, 8mm - Right & Left in Pair Made of stainless steel

Half round plier Specification: For orthodontic work. Made of hard tempered steel

Hand Scaler set of 5 piece Specification: Set containing 1 piece each of: sickle, push, universal, broad right & left .

Hard wire cutter Specification: Hard wire cutter made of tungsten carbide tipped

Heavy duty lathe with suction unit Specification: Electrically operatedHeavy duty motor unit having power not less than – 0.5hp High speed R.P.M.-3000 rpm Arrangement to attach Bur holding chuck – Electroplated spindle on one side for polishing buff wheel, On the other arm is a Grinding stone Wheel of diameter 2.5 inch or more. Provided with built in High Power dust suction unit for clean, unpolluted, dust free work environment, attached with dust collection bag – easily removable tray for debris collection. Table mountable Heavy Base Plate for vibration free operation Built – in lighting for high visibility

Heavy wire cutter Specification: wire cutter tungsten carbide tipped

Hinge articulator Specification: Rust free construction Permit opening & closing in hinge like motion. Support upper & lower cast. Upper member adjustable with locking nut.

Hook crimping plier Specification: For orthodontic work. Made of stainless steel

Hot plate with wooden handle

Howarth’s periosteal elevator Specification: Double ended: one end flat,broad sharp edge, other end rugine ended Made of stainless steel

Howe’s pliers- anterior Specification: with serrations, useful for placement and removal of archwires, pins and other auxiliares Made of stainless steel

Howe’s pliers- posterior Specification: pliers with serrations, useful for placement and removal of archwires, pins and other auxiliares

Humby’s knife holder Specification: Made of stainless steel

Hydraulic press Specification: The closed circuit hydraulic press should work with a pressure up to 7000 Kg of thrust. It can contain up to three flasks at a time. The structural elements in chromium plated steel. Provided with dial.

Hydro-solder Specification: Mains voltage: 1 x 230 V,Mains frequency: 50 x 60 Hz, Mains fuse: 1 x 10. A Max.gas production: 6 liter Max. Nozzle size: 0.07mm Dimensions W x H x D x (mm): 330 x 230 x 310 mm Weight: 22 Kg Capacity: 110lt, with accessories

Implant microsurveyor Specification: with Compass surveying system, portable hand held surveyor

Deleted

Deleted

Inlay wax curver double ended

INSTRUMENT SHARPENING KIT WITH ARKANSAS STONE Specification: flat Arkansas stone with conical shape plastic test stick(5) stone oil magnifying lens& other accessories

Intra oral camera with video monitor Specification: a)camera: easy to use, narrow head, comfortable for patient Intra oral camera with provision of variable lens adjustment that can be attached to dental chair unit video compatible so that images can be displayed on a computer workstation/LCD monitor Still image Resolution: 1024 (H) x 768(V) or more Video Resolution: 640 (H) X 480 (V) or more Focus Range: 1 mm - 25 mm Lens surrounded by LED lamp Input: 220V 50-60Hz Output: 5V, 2A

Intraoral camera with fluorescent technology Specification: Intra oral camera with caries detection and periogingival inflammation detection facility based on flurescent technology

INTRAORAL SAND BLASTER (MICROETCHER) Specification: Long tubing with compatible adapter for the Airotor Handpiece point Of the dental chair, Fully autoclavable, 50 microns Aluminium oxide particle size, 360 degree adjustable nozzle.

INTRAORALGOTHIC ARCH TRACER Specification: Jaw movement recording and centric relation positioning, one stylus and one tracing plate attachments to the jaw movement recording bases inside the mouth

Kilner’s cheek retractor Specification: Made of stainless steel

Kirkland gingivectomy knife Specification: For use in periodontal surgery

Kocher’s forceps 14cm hemostatic forcep. Specification: It is specifically designed to catch the bleeder that are deep within tissue hence it is ideally used on tough structures Made of stainless steel

Laboratory micromotor with brushless motor Specification: Compact and portable size, Continuous variable speed control , R.P.M-1000 -40000,On/Off foot switchOne- touch change of the driving direction for efficient operation with brushless motor With handpiece

Laboratory micromotor with carbon brush motor Specification: Compact and portable size, Continuous variable speed control , R.P.M-1000 -40000,On/Off foot switchOne- touch change of the driving direction for efficient operation with carbon brush motor With handpiece

Langenback’s retractor Specification: Made of stainless steel

Laser guided pin drilling system with Pins Specification: Electrically operated 110V/240V, Laser guided Pinsetter, pin drilling for easy die pin attachment. laser light technology with carbide bur drill with high speed motor. To Accurately Drill Parallel Holes Into The Underside Of The Model Die pins of various sizes(1000 pieces total) made with non corrosive alloys for use with pindex system of die pins.

LEAD APRON Specification: Adult Size, 0.5 mm thick lead covered with cotton on both sides, overstraps, buckles & hand gloves (size 6 to 7.5) with 0.5 mm thickness lead

Lecron wax curver Specification: Made of steel

Leuckhart pieces Specification: Two L shaped metallic stands for preparing paraffin wax block

Lingual arch plier Specification: For orthodontic work. Made of stainless steel

Loop forming plier Specification: For orthodontic work. Made of hard tempered steel

Deleted

Lower molar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece lower molar forcep

Lower premolar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint

Lower Roots forcep Specification: made of hard stainless steel with knurnled handle grip

Lower universal forcep Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece lower molar forcep

Magnification loupes 3.5x Specification: Ergonomically designed binocular loupe that can be worn over spectacle frame capable of 3.5X magnification at 420mm with 3Watt LED rechargeable light

Magnification loupes 4.5x Specification: Ergonomically designed binocular loupe that can be worn over spectacle frame capable of 4.5X magnification at 420mm with 3Watt LED rechargeable light

Magnifying work lamp Specification: with flexible & adjustable stand and base. Inbuilt LED based optical illumination system. Glass Lens diameter 7 inches or more, Magnification power upto 4 X

Manual crown remover Specification: with adjustable spring with crown remover tip ¬ 2 Single crown remover contrangled tip ¬ 3 Open¬end adjustment wrench

Manual press Specification: with base and cross bar made with high strength steel. The structural elements made with chromium plated steel. Capable of pressing upto 1 to 3 flasks at a time. Base should have holes for attachment to bench

Marquis colour coded probe Specification: For periodontal surgery Made of stainless steel colour coded at 3-6 & 9-12 mm

Mathieu plier Specification: straight & curved for orthodontic work Used for ligature typing and placing of elastics

MBT gauge Specification: For .022” slot For orthodontic work. Made of stainless steel

Metal impression tray non perforated Specification: Made of non corrosive alloy for edentulous patient set of upper & lower, size 0,1,2,3,4. (Price being same to be supplied as per requirement of user)

Metal impression tray perforated Specification: for dentulous patient Made of non corrosive alloy set of upper & lower, size 0,1,2,3,4. (Price being same to be supplied as per requirement of user)

Metal suction Tip Specification: a)3mm diameter -10 pc b)5mm diameter-10 pc Made of stainless steel

Micro Oscillating saw Specification: capable of Easily Cutting Channels And Bone Blocks Maximum 12,000 Oscillations Per Minute. Compact Design For Easy Access . Two Shaft Lengths & 4 Blade Sizes For Optimum Access. Includes External Irrigation Port For Effective Bone Cooling Universal "E" Type Coupling that Fits Implant Motor unit

Microhead air rotor handpiece Specification: suitable for use in child patient, head size 8.5 x 19.4 mm, provided with water spray, body made with ceramics autoclavable, rotational speed 3,00,000 to 450,00,00 rpm, provided with a bur changer & wrench. Physical verification required

Deleted

Microvascular instrument kit Specification: Kit comprises of- 1.Micro scissors 2.Micro needle holder 3.Jwellers forceps 4.Vessel dilators 5.Liga clips(no.100.no.200) 6.Ligaclip applicators 7.Vessel clamp (2A,2V,3A,3V) 8. Vessel clamp applicator 9. Hand held colour Doppler unit 10.Pneumatic tourniquet Specification to be quoted by the Bidder / Manufacturer Micro scissors- i) Adventitia Scissors- Flat handle , 8mm wide, straight-length of 15cms, blades 19mm – 5 pcs ii) Dissecting Scissors – Flat handle, 8mm wide , curved,length of 15cms, blades 19mm – 5 pcs iii) Adventitia Scissors- Round Handle, 8mm diameter of tip,straight, length 15cms, blades 12mm – 5 pcs iv) Dissecting Scissors – Round handle, 8mm diameter of tip,curved, length 15 cms, blades 12mm – 5 pcs Micro needle holder: i) Flat handle , 8mm wide, curved, 14 cms length – 6 pcs ii) Round Handle, 8mm, curved, 15 cms length – 6 pcs Jewellers forceps i) Flat handle , 9mm wide, straight, 13.5 cms length – 6 pcs ii) Flat handle , 9mm wide, angulated 45 degrees, 13.5 cms length – 6 pcs iii) Round handle , 8mm wide, straight, plateau, 15 cms length – 6 pcs Vessel dilators: i) Flat handle , 9mm wide, angulated 10 degrees, length 11cms – 6pcs Liga clips – made of Stainless steel, autoclavable. No.100 – 150 sets ( each set containing 6 liga clips) No.200 - 150 sets ( each set containing 6 liga clips) No.400 – 100 sets ( each set containing 6 liga clips) Ligaclip applicator: Grooves on inside jaw surfaces of applier which helps in increasing of jaw clip security. Angled jaws to improve visibility beyond structures Mechanical stop. Made of stainless steel and autoclavable.

Mini Pin & Ligature wire cutter Specification: tungsten carbide tipped Cuts soft wire pins and ligature wire up to .012”(.30 mm)

Miscellaneous HI Specification: 139 plier For orthodontic work. Made of stainless steel

Miscellaneous-HI

Model trimmer with carborundum disc Specification: motor RPM 2800 Heavy duty, Equipped with two Ball Bearing Single speed, Rating continuous with Buffer and 10" CARBORUNDUM Disc , with heavy base that can be clamped and installed on underlying table,with water inlet and out flow water system.

Model trimmer with diamond disc Specification: 1/2HP, RPM-2800, Heavy Duty Equipped with Two Ball Bearings, Single speed, Rating continuous with buffer and one 10" Diamond Disc Rough or fine without suction.1 piece spare diamond disc to be provided

Model trimmer with double disc Specification: one diamond & one carborundum disc RPM 2800 Double Motors HorsePower-1/2 or more each, Heavy duty, Equipped with Two Ball Bearings each motor, Single speed, Rating continuous with fixed one10" diamond disc fine, one carborundum coarse cutting wheel, base inlet, with outflow water system.

Molts elevator Specification: Length 7”Double ended with one round, blunted end and one pointed end Made of stainless steel

Mouth prop Specification: Autoclavable Made of Stainless steel with rubber pads for intra oral use over occlusal surfaces during surgery. The rubber pads are of 4 sizes attached by a stainless steel chain.

Naber’s probe Specification: For use in periodontal surgery double ended furcation probe conform to ISO 13485:2003/ EN ISO 13485:2012

Omega loop forming plier Specification: For orthodontic work. Made of stainless steel

Orban gingivectomy knife Specification: For use in periodontal surgery

Oschenbein chisel curved Specification: size No. 1 and No. 2 Ochsenbein chisels periodontal chisels. They havethree cutting edges, a flat edge on the tip and a curvededge on each side of the tip.

Oschenbein chisel straight Specification: 17.5 cm x 4 mm size No. 1 and No. 2 Ochsenbein chisels periodontal chisels. They havethree cutting edges, a flat edge on the tip and a curvededge on each side of the tip.

Osteotome 20mm Specification: Made of stainless steel

Paeso rimmer drill set Specification: Stainless steel, drill compatible with latch type handpiece for use in bulk removal of the tooth structure unit pack containing six different sizes each drill having 28-32 mm length.

Palatal Trimmer Specification: provided with1 fast cutting trimmer, electrically operated ,RPM-2600 or more Body made with 304 grade Stainless steel, or non rusting alloy. Dull Finished work surface, Dust collection with adapter hose, provided with1 fast cutting trimmer

Paquette blade handle Head dimension 2 Cm. Length. 15 Cm. , made of S.S

Paraffin wax bath (thermostatically controlled) Specification: Construction – Double walled effectively insulated.Wax tank of 20 gauge SS sheet. Fitted with laminated wooden rim and anodized alumininium cover mounted on 5 cm diameter. Heater- Two 1 KW each special wax heater. Heat control- Thermostat to control temperature from 30 degree C to 110 degree C Finish- Externally finished in oven baked Accessories-Power plug, 1 brush for wax application and aluminium sheet mesh for heater.

Pediatric Extraction lower incisors & canine forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction lower molar forcep Specification: for children made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction lower premolar forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction universal forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction upper incisor & canine forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction upper molar forcep left Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Extraction upper molar forcep right & left Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric Lower Roots forcep Specification: made of hard stainless steel with -knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Pediatric upper Roots forcep Specification: made of hard stainless steel with knurnled handle grip,disc type of hinge joint, 4.5 inches of length

Piezo surgical kit Specification: device with intermittent operation, 60 sec on then 30 sec off with irrigation, & 30 sec on- 120 sec off without irrigation, power supply 240V,50/60 Hz, maximum power absorbed 120VA. Surgical tip capable of modulating from 10 to 30 or more. 29kHz or more. Power adjustable from 2.8 to 16W. Tip vibration in range of 60-200µm.Motor with tips & other accessories (European CE/ FDA (USA)approved)

Pikling kit Specification: Electrically heated and thermostatically controlled pickling unit for acid based pickling agents with low power consumption for pickling of precious metals. Swivel sieve and housing made of shock-proof and acid-resistant polypropylene material

Pin & Ligature wire cutter Specification: tungsten carbide tipped Cuts soft wire pins and ligature wire up to .015” (.38 mm)

Plaster knife Specification: with working length not less than 2 .5inches

plaster spatula Specification: Round ended steel spatula having width of 1.25 inch & length 5-6 inches, with plastic or wooden handle

Plastic filling instrument Ward type

Pneumatic crown remover Specification: Pneumatic, autoclavable tips, Basic Kit Includes Easy Pneumatic Crown and Bridge Remover Bridge remover tip ¬ 1 Single crown remover tip ¬ 2 Single crown remover contrangled tip ¬ 3 Open ¬ended adjustment wrench Rubber gasket Flexi¬wire set

Pneumatic deflasking unit Specification: operates on air pressure. With handheld chisel- provided with detachable tips provided with variable powercontrol with air inlet and tubing length not less than 1.5 meter. Working pressure 1-6 bar

Portable Transcutaneous Electrical Nerve Stimulation (TENS) Specification: unit for pain management with replacement electrodes. The machine should have Burst, Continuous and Modulation pulse modes. Dual, isolated between channels with a pulse intensity of 0-80mA peak into 500ohm load. Pulse rate of 2-120Hz adjustable. Pulse width 40-260 microseconds, adjustable. Maximum voltage: 110V. Maximum charge: 21microCoulombs per pulse

Pressure moulding machine Specification: The unique thermally controlled heater reaches working temperature in few minutes. Power: 230 V, 850 W Working pressure: 0,5 – 6,0 bar Measurements (W x H x L): 450 x 230 x 260 mm

Pulp Tester digital Specification: Preset stimulus speed mode, Battery-9V, Auto-off after 3 min, with autoclavable tips, one touch operation, with digital read out of display

Punch biopsy forceps Specification: Made of stainless steel

Deleted

Rib shear (Doyan) Specification: Made of stainless steel

Ribbon arch plier Specification: For orthodontic work. Made of stainless steel

RME Bender Specification: For orthodontic work. Made of stainless steel

Robinson black bristle brush Specification: having diameter of not more than 2.5 inch.

Root canal explorer Stainless steel (Cow horn design)

Rowe zygomatic elevator Specification: Made of stainless steel (Standard adult size)

Rubber bowl Specification: size-large 13 cm in height made with flexible synthetic rubber material

Rubber dam kit Specification: Rubber Dam Clamp Forceps Rubber Dam Punch Rubber Dam Frame - Adult Universal Rubber Dam Template FDI Rubber Dam Provided with different clamp designs such as molar clamps, bicuspid clamps winged, labial clamps winged it Contains: -Plastic Dental Dam Frame 6"/5" -Wedjets Stabilizing Cord Pack(S) -Hygenic Template 6"/5" -Punch -Forcep -Rubber Dam Sheets 6x6"(36)/Pedo 5x5"(52) -Set of 9 Clamps-Adult/Set of 6-Pedo

Sand blaster unit Specification: Self illuminated chamber. Unit with ventilation slits with rubber gloves, pressure regulator, air filter ,provided with glass pane. Flow of blasting material from 1 to 6 Bar. With wear resistant nozzle tip attached with wear & tear resistant hoses & nozzles. With filter. Micro & macro mode

Sanders Periodontal knife size-1/2

Schluger bone file For use in periodontal surgery

Self retaining retractor- Weit Laner type Specification: Made of stainless steel

Semi adjustable articulator with accessories Specification: wide view Arcon Articulator With spring¬ bow, ear¬piece, face bow, orbital indicator, bite fork & other accessories Standard packaging/physical verification of sample may be made

Separator placement pliers Specification: For orthodontic work. Made of hard tempered steel

Sinus lifting instrument kit Specification: For Lateral & crestal approach with s-reamer/lateral reamers initial drill/crestal drills bone inserter bone spreader bone carrier bone condenser depth gauge chisels of different width sinus curettes- of various designs bone rongeur forceps mallet irrigation syringe & tips & other instruments autoclavable cassette 1 piece

Slide storing cabinet Specification: Cabinet for 1050 slides consisting of 6 drawers each for 175 slides, arranged in single rowFramework made of 15mm plywood with top and sides covered with sunmica laminated sheet.

Slide warming table Specification: Top surface made of Stainless Steel (SS-304 grade) The surface temperature is controlled from ambient to 70°C Supplied complete with pilot lamp, cord and plug To work on 220/230 Volts A.C. Supply

SPIRIT LAMP Specification: Made of stainless steel OF 100 ML CAPACITY WITH WICK & DETACHABLE CAP STAINLESS STEEL body

Spot welder with soldering attachment Specification: • Electrically operated • Voltage110 - 240 volts • Applications / Indication Spot Welding • Power Settings2,000 Amperes • Heat Settings2 • Electrode / Tip Type Hand Electrode • Welding Positions adjustable

Steel mallet Specification: for use in oral surgical work Made of stainless steel length 7.5”, head diameter 20-22mm

Steel slide racks for staining Specification: The 5-Slide Gripper can accommodate 5 microscope slides in one staining procedure.It fits most coplin and round-open staining jars It should be made of a special material which is resistant to all chemicals and solvents which are used in staining It withstands drying temperatures up to 80°C

Step plier Specification: For orthodontic work. Made of hard tempered steel

Surgical elevators- Coopland’s pattern Specification: made of hard stainless steel

Surgical elevators- Cryer’s pattern Specification: made of hard stainless steel Length 145mm, neck diameter 3.6mm, working tip length 9mm for right & left Set of 2 units cryer’s right, left

Surveyor mounted Miling machine Specification: Universal precision milling unit. Areas of application; wax milling and scraping ; milling, fine grinding, drilling and smoothing of metal with the help of the modeling spindle, it can be used as a surveying instrument and for mounting auxiliary parts. Magnetic locking device for model table. Drilling depth stop and connection facilities for additional handpiece for finishing. Advantages: Universal design for measuring, blocking and routing (router head accept spindles, drawing tools and measuring tools). Easily movable double articulating arm free from play. Routing spindle with quick coupling. Controllable, heatable wax knife RPM can be infinitely controlled from 3000 to 35000 rpm. Left/right rotation. Route head with micrometer screw for exact vertical bores. Good illumination due to integrated LED light ISO 13485 OR CE Certificate

Three prong plier Specification: For orthodontic work. Made of stainless steel

Tissue biopsy kit Specification: 1.Small and short scalpel blades (no. 15, 11, 12 or even 5) – 2. Mosquito forceps – 2 pc curved & 2 pc straight 3. Gauze container made of stainless steel- size small 1pc 4. Alley’s tissue forcep 2pc 5. punch biopsy set-one piece of three different diameters (circular blade size 3 mm, 5mm & 7 mm) in each kit 6. Mc Indoe’s dissecting scissor1pc 7. Bone scoop- small1pc 8. Bone curette- tip diameter 3 mm-1pc 9. Sklar Tungsten Carbide Bozeman 10.Needle Holder 8" Tungsten Carbide tipped- 1 pc with catch, 11. Wards needle holder- 1pc 12. Toothed dissecting forcep-1pc 13. Non Toothed dissecting forcep-1pc

Tissue capsules / Tissue embedding cassettes Specification: Made of acetyl polymer;Cassettes should keep specimen safely submerged in liquid, Efficient flow-through slots,Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle. Pore size: 1mm square pores Outside dimensions: 28.5 x 41 x 6.7mm (1.12" x 1.61" x 0.26") Inside dimensions: 26 x 30 x 5mm (1.02" x 1.18" x 0.2")

Tissue floatation water bath Specification: (thermostatically controlled) Inner tank (Single piece) made of black anodized aluminum. Housing made of powder coated aluminum. Front panel consist of temperature regulator knob, mains switch and pilot lamp. Inside black and outer surface finished in powder paint, with wide enough rim for drying the wet slides. Bath size(inner)-225mm*70mm Temperature- controlled by capillary tube thermostat Temperature range- +5 degree c to 70 degree C

Torch, alcohol, dental Specification: Wick Volume capacity 90ml or more, with adjustable needle point flame, body metal or plastic

Torquing pliers male Specification: For orthodontic work. Made of stainless steel

Torquing pliers male Specification: For orthodontic work. Made of stainless steel

Tourniquet- arm Specification: having pressure regulator, tubing and connectors With not less than7 cm inflatable cuff

Tourniquet- leg Specification: having pressure regulator, tubing and connectors With wide 14 cm inflatable cuff

Towel clips (clamps) Backhause type Specification: To secure surgical drapes and to secure plastic and rubber tubing to drapes FEATURES: Sharp prong tips 31⁄2 inchand 51⁄4 inch Additional use: Remove metal temporary crowns Made of stainless steel

Towel Cross Section Clip Specification: Made of stainless steel Used to fix drapes to tissue with minimal trauma during surgical operations

Tracing table Specification: box portable with opaque screen Light Box with LED electrically operated with Ajustbale Illumination. Box dimension 14” x 16” or more

TRANSPARENCY SCANNER Specification: Dual lens system, minimum 6,400 DPI optical resolution, 4.0 DMAX for smooth gradation and fine shadow detection, antireflective optical coating and high reflection mirror, digital ICE technology, 8” x 10” transparency unit built into lead

Trephine Bur Set Specification: of 3. Dia- 2,3,4mm for harvesting bone cores For use in periodontal surgery ISO 13485 OR EC Certificate(directive 93/42/EEC)

Turret Specification: Zero torque For orthodontic work, Made of Stainless steel.

Tweed plier Specification: For orthodontic work. Made of stainless steel

Typhodont articulator Specification: Articulated Model with Soft Pink (Not Transparent) acrylic or plastic Gingiva Material. Included:28 anatomically shaped screwable typhodont ivorine teeth

Ultrasonic cleaner Specification: 220V, 100 -200watt & above, 5 liter capacity, with stainless steel body &cover.

ULTRASONIC DENTAL SCALER Specification: Electrically operated 220/240V 50/60Hz ac with control box,multi frequency handpiece with scaling tips,foot control,water connector, tube & other accessories. Capable of upto 20KHz ultrasonic vibrations/second or more ISO 18397:2016/ ISO/FDA/CE 13485 OR EC Certificate

UNC -15 Periodontal probe plastic Specification: probe with Markings at 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15Colour coded at 5,10 & 15mm, thin shanked probe

UNC -15 Periodontal probe: titanium Specification: probe with Markings at 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15Colour coded at 5,10 & 15mm, thin shanked probe conform to ISO 13485:2003/ EN ISO 13485:2012 ISO 13485 OR EC Certificate(directive 93/42/EEC)

Universal columbia curette Specification: Common properties: 1.triple tempered steel 2.satin steel handle 3.corrosion resistant 4.rust resistant 5.stain resistant 6.can be sharpened by traditional sharpening stones 7.properly designed & balanced handles to reduce chances of “carpal tunnel syndrome” a) In different sizes Handle-10-11cm shank-2.7-3.2cm Blade-length-5.8-6.5mm, Width-1.3-1.6mm,90 degree offset angle Semicircular cross section with convex base b) In sizes of SC4R/4L6 Handle-10-11cmShank-2.9-3.4-cm Blade-length-5.8-6.5mm, Width-1.3-1.6mm, 90 degree offset angle Semicircular cross section with convex base.

University of Michigan O probe Specification: For use in periodontal surgery Single ended probe with markings at 3-6-8mm

Upper canine Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint

Upper incisor Extraction forcep English pattern Specification: Forcep made of hard stainless steel with knurnled handle grip,disc /box type of hinge joint

Upper molar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint Set of one piece right & one piece left upper molar forcep

Upper premolar Extraction forcep English pattern Specification: made of hard stainless steel with knurnled handle grip, disc /box type of hinge joint

Upper Roots forcep Specification: made of hard stainless steel with knurnled handle grip

Upper universal forcep Specification: made of hard stainless steel with knurnled handle grip

UV Steriliser Specification: Dimensions of cabinet: 22 x 12 x 8” Front door with uv protected glass window & magnetic door seal Provided with multiple tray racks not less than four Electrically operated Provided with UV light source

Vacuum investment unit Specification: capable of mixing unit amount of investment material under vacuum through a motor

Vacuum mixing machine Specification: 1. Vacuum mixing machine For mixing investment material 2. Electrically operated motor 1500 watts or more 3. compact 4. automatic regulation of the vacuum 5. the mixing motor remains clean and is easily serviced due to a supporting filter and a fine filter in conjunction with the maintenance-free vacuum pump 6. direct connection between mixing bowl and vacuum pump – no disturbing exterior hose 7. mechanical coupling tolock the mixing bowl in position 8. a mixing bowls (500 g ) ISO 13485 OR CE Certificate

Vibrator Specification: • Electrically operated - Size 4.5 x 8 x 6.5 inches or morePlatform Shaperectangular, Type Heavy Duty • ConstructionEnamel painted body with rubber plate above body,Speed: 3-Speed vibration controller • Platform Shaperectangular

warwick james elevators Specification: made of hard stainless steel Set of 3 units right, left & straight tips

Wax block storing cabinet Specification: Cabinet made out of Duro-board, externally clad in laminated sheet. Dust-proof door is lockable. Provided with smoothly sliding drawers with sixteen compartments each of size 4x4x2" and have puller knobs. Each compartment can store blocks in two rows.

Wax burnout furnace Specification: Maximum temp 1200C working temp 1150C with Digital Display cum temperature controller with safety alarm muffle size : 175x175x225mm 4.0k.w

Wax curver: PKT TYPE Specification: Set of 5 instruments

wax knife Specification: Made of stainless steel With one end bearing knife pointed & other thick, flat with curved end

wax spatula Specification: Made of stainless steel With one end pointed & other end curved

Weingart plier Specification: tungsten carbide tipped

Westcott Curved Tenotomy Scissors Specification: 19mm/21mm Made of stainless steel

WHO Probe Specification: A. Clinical B. Epidemiological A. Clinical – 0.5 mm ball at the tip, Making at 3.5mm,8.5mm,11.5 mm, Colour Coding 3.5-5.55 mm Weight – 5 gm B. Epidemiological- Marking at 3.5 mm & 5.5 mm 0.5 mm ball at the tip

Williams probe Specification: For use in periodontal surgeryth marking at 1,2,3,5,7,,9 & 10mm

Wire cutter Specification: made of hard tempered steel

Wire tucker Specification: For orthodontic work. Tungsten carbide tipped

Wooden / Plastic slide boxes Specification: Framework with finger joints fabricated out of teakwood with sunmica top and plywood bottom. Wooden grooves for standing 3”x1” glass slide in vertical position individually. Inside bottom covered with velvet and inside top with printed index. Provided with brass chromium plated hinges clips and card frame. Finished in natural color niro-cellulose lacquer.

Wooden mallet Specification: having wooden head that is10 cm in length, round at one end of diameter 3 cms while tapered at other end, handle length 28 cms FOR prosthodontic laboratory use

Woodson Periosteal Elevator Specification: Double ended- one end curved(Curved working end- Length: 10-14 mm, width: 5-6mm) Flat Tapered end: Length – 14-16 mm, Width at the widest point- 4-6 mm

KANJI AND SONS SURGICAL

HEALTH CARE PRODUCTS

M/S MS KANJI SURGICAL PVT. LTD.