CONSTRUCTION OF BALANCE WORK OF TARKULANI PUMP HOUSE AT KM. 30.300 ON MALOUNI BUND

Amount

Earth work in trenches in dumat or loamsoil with an initial lead of 30 mtr and initial lift up to 1.50 mtr

Earth work in embankment with levelling and dressing including loading, unloading, carriage,and proper placing in position with mannual compaction etc.

Cement concrete M15 for feeder channel, C C Blocks as per drawings.

Cutting ,bending, binding and Placing In position, Re-inforcement steel incld cost of TMT Steel,binding wire And Tack weldinng with material with labour & all T &P.

Supplying & Laying Local Sand including carriage labour, T&P, manual compaction etc. complete all.

Centering and Shuttering of R.C.C. work including cost of all material and T&P etc. Up to 2 mtr Ht (without staging works)

Centering and Shuttering of R.C.C. work up to 5.0m Height including cost of staging, all material, labour, T&P etc. required for proper completion of work.

Centering and Shttering of R.C.C. work above 5 mtr Height including cost of staging, all material, labour, T&P etc. required for proper completion of work.

Reinforcement Cement Concrete in M-30 for STM Raft,walls,columns,PBM walls, columns, DGBM,CFRW,CRW etc as per drawings

P.C.C. 1:3:6 including all cost of material, labour and T&P etc. (M-10)

S/L of Geo textile sheet of 240gsm including cost of Geo sheet, all labour, T&P etc. under boulder pitching.

Supply and Laying of Mirzapur Stone boulder in pithcing/Launching apron with all cost of stone boulder, cartage, Royality, all labour, lead, lift, T&P etc.

Supplying and fixing water Bar 15cm wide with all cost of material, labour, T&P cartage etc.

Filling of Filter material( 10-20 mm grit) below CC blocks (D/S)

Filling of Filter material by( 10 mm grit) below CC blocks (D/S)

Supplying and Filling of Filter material by coarse sand including cost of material and labour.

Brick masonary works ( 1:4 ) in PRM walls 0.23 mtr thick including Cost of all materials, lab,T&P etc

Cement Concrete in M-20 for wlls footing, toe walls, on slopes of bund,Gen Pedstals etc

Supplying & fixing rolling shutters of approved make of 80x125mm gauge cold rolled M.S laths inter locked through out their entire length and joined together at the end locks and mounted on specially designed pipe shaft with bracket sides guides and arrangment fo inside and out side locking with push and pull operatons complete but excluding the cost of top cover and spring.

Providing and fixing 27.50 cm long wire spring grade no.2 for rolling shutters 3 nos each.

Providing and fixing top cover for rolling shutters 18 gauge.

Providing and fixing ball bearing for rolling shutters .

Providing and fixing Pressed steel door frames confirming to IS: 4351 manufactured from comercial mild steel of 1.25 mm thickness includind hinges jamb,lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means,adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Providing and fixing hand rail of approved size by welding etc.to steel ladder railing ,balcony railing and staircase railing including applying apriming coat of approved steel primer.

Finshing of walls by providing and applying plaster of paris putty of 2mm thick & applying 1 coats of primer of aproved brand and 2 applying 2 coats of Exterior paint (Apex Ultima) including parpre surface even and smooth, cost of all material, labour, T&P etc. required for proper completion of work.

Apply priming coat over new steel and other metal surface after including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured wirh wire brushes fine steel/woodscrappers sand papering and knottning including cost of all material labur and T&P ctc. for proper completion of work.

Silt clearence in channel (Gorra Drain) (Near Tarkulani Regulator) 1000 Mtrx16.00x2.00

Construction of VRB at feeder channel

Supplying and laying of Sal wood Planks 4'' thick size 94.20x0.30x0.10 mtr)

Providing & fixing of 30 mm door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm with a & 28 mm thick as vertical and horizental style.Joints are made using solvent adhesive and GI C-section(39mmx19mmx0.6 mm thick) or MS pipe 40 mm x20 mm stiffner frame insert and telescopic polymetric L corners .The Pannel shall be filled with 3 mm thick high pressure compact laminated as per manufactures specification and direction in Engineer in Chief.cover moulding shall be provided for covering ,fixing screws and elegant look.

Supplying and fixing, of steel gril with fabrication,welding etc. square bar without frame.

12 mm thick cement Plaster (1;4) r on brick masonary as 1 part cement and 4 Part mooram incl scafolding,cost of all materials ,lab,T&P etc

Supplying ,fabricating, fixing of steel gate size (4.20x2.50) incl spandle ,chakari and all cost of materials, labs etc

M/S ASHOK KUMAR