PROVISIONING OF 05 X WATCH TOWERS WITH SECURITY WALL AND BOUNDARY WALL FOR BLDG NO P-24 (OFFICERS MESS) AND RE-WIRING AND LIGHTS OF BLDG NO P-26A, 24, 25, 32, 39, 29, 14, 19 AND P-22 AT 25 WEU INCLUDING MINORS WORKS UNDER GE (EAST) LUCKNOW

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified & directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:4 concrete complete all as specified & directed.

M&L for half brick thick wall with Sub class 'B' bricks straight or curved on plan to any radius in CM 1:4 concrete complete all as specified & directed.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement concrete complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:6 brick work or concrete surface and finishing the surface even and smooth without using extra cement concrete complete all as specified & directed.

M&L for preperation of new wall surfaces and applying two coats of cement base paint over a coat of primer concrete complete all as specified & directed.

M&L for preparation of new plastered surface of wall including wall care putty 2-3mm thick and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specified and directed.

M&L for Complete removal of exiting treatment and applying two coats of oil bound distemper over one coat of wall care putty of wall including preparation concrete complete all as specified & directed.

M&L for preperation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer concrete complete all as specified & directed.

M&L for preparation of new/old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer concrete complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premise concrete complete all as specified & directed.

S&F for vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile not exc 0.36 Sqm in floor etc laid over 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

S&F vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile not exc 0.36 Sqm in floor etc laid over 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

S&F Solid PVC Wall Linning consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame and pvc L-beading at top of wall lining,opening eadge of door&windows as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing concrete complete all as specified & directed.

S&F false ceiling with 4mm thick E-board Everest make white prepainted designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire concrete complete all as specified & directed. Note:- All exposed surface of grid work shall be powder coated white.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.

S&F of Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F pwoder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed.

S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium sanp beading screw , anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) complete all as specified & directed.

S&F powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass complete all as specified & directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed.

S&F of sheet glass 3.0/4.8mm thick,ordinary quality and glazing with aluminium snap beading in squares not exc 0.5 sqm in each pane complete all as specified & directed.

S&F powder coated aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation, etc. or for shafts, well, cesspits, manholes, peir holes, etc. not exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified & directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in hard/dense soil concrete complete all as specified & directed.

Removing excavated material to distance not exc. 50mtr and deposited where directed at level not exc 1.5 mtr above the starting point complete all as specified & directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified & directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

M&L for mild steel framed work as in doors and chowkats or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging fittings (exculisve of steel sheeting or other covering) complete all as specified & directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item complete all as specified & directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm in hard and dense soil complete all as specified & directed.

M&L for cement concrete 1:3:6 types C-2 (usiing 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed.

S&F rolled sections as in main and Cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde- E-250) quality A complete all as specified & directed.

S&F second class hard wood boarding, with nails in any situation (excet flooring and skirting), planed one side with butt joints complete all as specified & directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws incl frame work complete all as specified & directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil complete all as specified & directed.

M&L hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for 125mm thick cement concrete type B-2 1:2:4 (using 40 mm graded aggregate) as in sub base of floor/ path/pavement complete all as specified & directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade including sand cushoing and laying over screed bed or bedding layer of mortor 15mm thick in CM 1:6 for laying floor finishes complete all as specified & directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides complete all as specified & directed.

M&L 35mm thick second class hardwood glazed/gauzed and skelton shutters for doors open rebated and prepared to recive glass, gauze etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20(b) and fixed to chowkats complete all as specified & directed.

M&L 30mm thick second class hardwood glazed/gauzed and skelton shutters for window/ventilators, open rebated and prepared to recive glass, gauze etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clause 8.20 (b) and fixed to chowkats complete all as specified & directed.

S&F for Butt hinges of size 100 mm medium weight cold rolled mild steel complete all as specified & directed.

S&F for Butt hinges of size 75 mm medium weight cold rolled mild steel complete all as specified & directed.

S&F 150mm long aluminium handles, cast type anodised extruded section complete all as specified & directed.

S&F 100mm long aluminium handles, cast type anodised extruded section complete all as specified & directed.

S&F for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F for 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed.

Supply Chain link fence of 75mm x 75mm mesh size (oblong) of 3-4mm dia GI wire complete all as specified & directed.

S&F fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof wall etc fixed with L type or J type or cranked hook bolts in lieu of of screw complete all as specified & directed.

Dismantling of timber boarding(wooden CB) any description fixed in fixed in any position fixed with nails etc complete all as specified & directed.

S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing complete all as specified & directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum.

S&F 150mm long fancy brass handle for cupboard & wardrobe shutter complete all as specified & directed.

S&F continous piano hinges of brass with width 30mm of flap complete all as specified & directed.

S&F hydraulic slider of size 8"x1"x1/2" with steel ball, Aluminium body and striking plate including letting complete all as specified & directed.

S&F stainless steel wardrope trolly of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified & directed. Make of basket - 3 Square, Make of channel - Hettich

S&F stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side complete all as specified & directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F stainless steel modular type basket of size 20x16x6 inches with side sliding roller clip over stainless steel channel on both side complete all as specified & directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F stainless steel modular type basket of size 20x16x4 inches with side sliding roller clip over stainless steel channel on both side complete all as specified & directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F stainless steel half circle modular type basket of size 28x20x4 inches over stainless steel pipe revolving type with sliding rails complete all as specified and directed. Make of basket - 3 Square.

S&F stainless steel modular type basket of size 20x20x4 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side complete all as specified and directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F stainless steel modular type basket of size 20x20x12 inches (pull out 3 shelf) with side sliding roller clip over stainless steel channel on both side complete all as specified and directed. Make of basket - 3 Square, Make of channel - Hettich.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B-0, complete, including taking down old unserviceable sink including 40mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)

S&F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws concrete complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down carefully copper/aluminium sub main wiring from existing concealed PVC conduit complete and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified & directed.

Disconnecting/dismantling of old existing unserviceable DB's any way 240 Volts with their unserviceable.burnt MCB's/Isolators complete all as specified & directed.

Taking down Ceiling/wall/Exhaust fan & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as specified & directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR complete all as specified & directed. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 78 above but 5 Amp socket outlet, independent.

All as per item No 78 above but on the same board.

All as per item No 78 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F switch piano flush type 5 Amp one way single pole, 240 volts complete all as specified & directed.

S&F socket outlet 5 Amp 5 Pin 240 volt flush type complete all as specified & directed.

S&F switch socket outlet two in one 5 & 15 Amp 6 pin multipurpose combination complete all as specified & directed.

S&F ceiling fan regulator for 1200mm/1400mm sweep electronic rotary step type 120/280 volts complete all as specified & directed.

S&F in repair ceiling rose two or three terminals surfaces bakelite 65 x 50mm size complete all as specified & directed.

S&F lamp holder with back plate suitable for batten fittings (white colour) complete all as specified & directed.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified & directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall.

All as per Item No 88 hereinbefore but for one 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 88 hereinbefore but for one 5 A socket outlet on same Board all as specified and directed.

All as per Item No 88 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor

All as per item No.88 above but three module

All as per item No 88 above but six module

All as per item No. 88 above but eight module

All as item No 88 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc.

All as item No 88 above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc.

All as item No 88 above but eight modular plat of including cutting, grooving and plastering etc.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified & directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified & directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified & directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified & directed.

S&F in repair LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified & directed.

S&F of electric chimney single phase 230 Volt including push control, baffle filter, metal blower, min suction power 800 Cum/Hr, black powder coated with min size L-90 cm and S-60cm and all accessories incl Aluminium hose pipe 4/6 inch 8 mtr complete all as specified and directed.( Note-: Al hose pipe rate is included in the item rate and no extra payment will be done to Contractor).

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified & directed.

S&F Modular white cover plate with frame, 12 Module complete all as specified & directed.

S&F Modular white cover plate with frame, 8 Module complete all as specified & directed.

S&F Modular white cover plate with frame, 6 Module complete all as specified & directed.

S&F Modular white cover plate with frame, 3 Module complete all as specified & directed.

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.

S&F in replacement decorative wall mounted fancy light fitting made up of polycarbonate; sutable for retrofit CFL 15W (Spiral B-22 base) & including one No. retrofit CFL 15W spiral type including LED Bulb complete all as specified & directed.

S&F in repair/ replacement bulk head light fitting complete complete all as specified & directed.

S&F in repair/ replacement LED Mirror light fitting 15 watt(2') with extruded aluminium housing and robust construction complete with inbuilt driver complete all as specified & directed.

S&F in repair/ replacement LED street light pressure die cast aluminium housing suitable for 35W IP 66 protection including MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe complete all as specified & directed.

S&F MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified & directed.

S&F MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified & directed.

S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified & directed.

S&F MCB DB SPN 12 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified & directed.

S&F MCCB DB VTPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified & directed.

S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified & directed.

S&F MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified & directed.

S&F MCB SPN 230V, 6-32 Amps capacity complete all as specified & directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as specified & directed.

S&F in replacement TPN three pole 415 volts 100 Amps repturing capacity 25KA complete all as specified & directed.

M&L for wiring with two single core 2.5 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 2.5 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified & directed.

M&L for wiring with two single core 4 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 4.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified & directed.

All as per item No. 125 but two single core 6 sqmm including 6 Sqmm PVC insulated unsheathed stranded copper conductor complete all as specified & directed.

All as per item No. 125 but four run 10 sqmm including 10 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified & directed.

S&F in repair/ replacement 2X2 36 Wattl LED ceiling Light Fitting exquisitely designed luminaire which is bound to deliver extra lumen thruogh its, pure form and glare-less light Recessed full open with required electrical connection with suitable wire (120 lumen /watt) complete all as specified & directed.

S&F wall fan of 300 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified & directed.

S&F wall fan of 400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified & directed.

S&F ceiling fan of 1200 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified & directed.

S&F exhaust fans single phase 230/240 Volts PVC body of size 300 mm sweep 1400 RPM including Cutting wall suitable size of exhaust fan and finishing as per existing colour louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified & directed.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth complete all as specified & directed.

M&L for renewal of Earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr, deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of nut, bolts, check nut 7 washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20mm dia GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR part-I 2010 print complete all as specified & directed.

S&F copper strip of size 20 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground level complete all as specified and directed

S&F Air Termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and directed

S&F epoxy insulator with red colour incl with nut and bolt suitable for fixing size of strip 25 X 3.15 mm complete all as specified and directed

S&F Test Point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexognal head screw complete all as specified and directed.

S&F wall galvanised iron water tubing medium grade 20 mm including provison of all necessary nuts, bolt, steel fittings/accessaries complete all as specified & directed.

M&L for Chemical earthing complete for earthing test point with copper earth plate electrode in ground (Earth pit not less than 2.25 metre below normal ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected and including copper strip 25mm x 4mm (upto the body of euipment ) by means of copper bolts, nuts, check nuts and washers, earth plate surrounded by picked layers of earthing chemical 15 cm thick, all ground top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel, testing on completeion including PCC chamber (1:3:6) using 20mm grade stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 using 20mm grade stone aggregate and 8mm dia deformed TMT bars @ 10 cm C/C both way including form work and MS frame using MS angle of size 45mm x 4 mm x 5mm complete all as shown in electrical plate No. 3 of MES schedule 1991 Part-I complete all as specified & directed.

m/s raghubar dayal

M/S Reliance Construction

ANIL CONSTRUCTION

M/S KAUSHIK CONSTRUCTION

QUALITY CONSTRUCTIONS CO

M/s Arora Trading Co