PROVISION OF SWITCH ROOM AND AIR CONDITIONERS AS PART OF PROJECT NCN AT 07 LOCATIONS IN NOFRA AND PROVN OF DEFICIENT GEYSERS AT COMPANY DSC ND MBI LINE AT INS SHIKRA UNDER GE NW NOFRA COLABA MUMBAI

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.

Material and labour for chipping, removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. Hard concrete should not be removed by force, complete all as specified as directed by Engineer-in-charge.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified.

Material & labour for cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Pidilite or Dr.Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry all as per manufacturer's instructions and complete all as specified as directed by Engineer-in-charge.

Material and labour for replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified as directed by Engr-in-charge.

Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/ Protectsil CIT/Ferogard 903 on concrete surface (this inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibitor the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack as well as cathode, which is purely alkaline in nature (pH-9.5), So it has no carcinogen activity with concrete all as per manufacturer's instructions complete all as specified as directed by Engr-in-charge.

Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete complete all as per manufacturer's instructions and as directed by Engineer-in-Charge Make :- Krishna Conchem, Dr Fixit, Fosroc as approved

Building up the profile of structural member by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar/LW+) (1:5:15 = 1 monobond-5 cement -15 sand) -in damaged area in 30mm thickness including leveling profiling etc complete all as per manufacturer's instructions and as directed by Engr-in-Charge Make :- Dr Fixit, Sita, STP, Fosroc as approved

Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Note :- Reinforcement shall be measured and paid separately rates quoted shall be inclusive of jacketing, formwork and micro concrete etc complete all as specified. Make :- Dr Fixit, STP, Fosroc as approved

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Material & labour for complete removal of existing plastered wall surfaces and applying Finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10mm thick on fair faces of ceilings in CM (1:3) & rendering is to be finishing even & smooth without using extra cement., complete all as specified.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer on 2 mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil emuslion distemper over a coat of primer and 2 mm thick wall care putty (JK/ Birla) all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying 2 coats of oil emuslion distemper over a coat of all as specified and directed.

M&L for preparation of old plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer on 2 mm thick wall care putty (JK / Birla) all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceble tiles to store and rubbish off the permises.complete all as specified & as directed.

M&L, Glazed ceramic tiles coloured of size 350x 250x 7 mm/ 450X 350X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 10 to 15mm thick backing coat in CM 1:4, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, all as specified.

S&F Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame) , complete all as specified.

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partition/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

Supply & fix aluminium anodised grill (minimum thickness of anodising 15 micron) powder coated with and including suitable aluminium anodized 'E'/'H' section frame as required with aluminium rebated/screwed attachment complete all as specified as directed by Engineer-in-charge.. Note:- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd as per Design No DG 102, 7.50mm x 6.0mm and weight shall not be less than 3.131Kg/Sqm or approved design

Taking down chowkats or frames exc 1.5 sqm each but n.exc 4 sqm with shutters (without taking off shutters from the frame)

M&L for 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified.

S&F 30mm thickness Flush shutters, solid core construction, with particle board core, commercial type on both sides and both faces is covered with decorative face veneer with lipping / frame work to match, complete all as specified.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. Complete all as specified and directed by Engr in Charge.

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long, complete all as specified.

S&F extruded aluminium alloy handle fabricated type anodized 150mm long.

S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F in repair for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in repair, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S& F for Framed work such as grills,angle iron, posts, pipe sections, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; door shutters with gusset plates, braces, etc., to be prepared for hanging or sliding with and including eitherr hooks and hinges or steel hanging door fittings and similar work con- forming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed by Engr-in-Charge.

M & L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc and similar articles conforming to Fe-290 Gde E-165

M & L for false ceiling made out of 600x600x 4 to 6 mm thick ceiling board/ tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angel size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/ clits / pin hook etc for securing frame work to ceiling to the snap grid all as directed by Engr-in-Charge including provision of necessary holes / cuttings for providing light/ fan as required including making necessary racesses/ projected pattern complete all as specified and as directed. Make : Armstrong/ Chanakya/ Everest

Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfaced on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire- Polycab/ Finolex/ Havells Make of casing caping- Precision/ Pressfit

Supply and fixing in repair PVC insulated, stranded copper conductor of size 3 core 4.0 Sqmm in connection of Geyser to Socket with fixing arrangement all as specified and directed . Make- Polycab/ Finolex/Havells

Supply and fix in repair single phase sheet metal powder coated double door distribution board 4 way comprising with following :- (a) MCB SPN 40Amps 240Volts, 10KA - 1 No (b) MCB SP 6 - 32Amps 240Volts - 2No Make - Legrand/ Schneider/ GE

Supply and fix submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping / conduit not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping/ conduit and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping / conduit Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

Supply and fix in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners. Make - Legrand/ Schneider/ GE

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR. The rate quoted shall be included copper tubing of any size and upto any length including drain pipe, brackets, all connectiong fitting fixtures at the site as per site requirement.

Replacement of manual call point suitable for addressable system duly painted in red colour paint with front glass (to be broken in case of fire ) complete with test key to check the response with out breaking the glass and die cast aluminum housing with IFD indicator all as specified. Make:- APOLLO / MORLEY

Supply and fixing electronic hooters. Make : APOLLO / MORLEY

Supply and fixing Addressable type Smoke / Heat detector. Make : APOLLO / MORLEY

Supply and replacement, installation, testing & commissioning of Micro processor based 2 wire fault tolerant loop, required loop networkable type 5 Loop (each loop accessing maximum 2 detectors and 02 modules ) fire alarm/detection control panel. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module whenever any alarm is triggered. The panel shall have rectifier, Loop cards, 80 character L C D unit to indicate Fire/Fault Signal with address and analog output. The Panel shall support 02 zones Addressable 2 way Talk Back fire fighter communication, in case of emergency. The panel shall have ability to get integrated with PA System for zone wise annoucements. The panel shall support both Loop Powered & conventional Notification devices for emergency responses. the Panel shall support Auto learn feature. The panel should support networking upto 99 panels with maximum distance of 12 Km between 1 & last & 1.5 KM between adjacent panels on RS485. The Panel shall support IP connectivity if requred to connect on LAN or WAN network. the panel shall support BMS connectivity through Bacnet/Modbus moduels. The Panel Shallbe Sheet Steel Painted, selaed to IP30. The Panel Shall have 02 Zones with Individual LEd Indicators, expandable to 10 LED Indicators. The Panel Shall have 3 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 48 hours with battery charger complete as required and as per specifications. conforming to BS5839 Standards and Duly Approved by EN54/ LPCB/ VDS/ UL/BSA complete all as specified and directed by Engineer-in-Charge, Voice Alarm controller with USB, MP3, AM/FM player )with 1000 watts Power Amplifier. Make :- Cease fire / Apollo

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module. Make- Legrand (Aretor)/ Goldmedal (Nixon)/ Schneider (Zencelo)

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module. Make- Legrand (Aretor)/ Goldmedal (Nixon)/ Schneider (Zencelo)

Supply and fix in repair Modular white cover plate with Frame 3 Module. Make- Legrand (Aretor)/ Goldmedal (WEGA)/ Schneider (Zencelo)

Supply and fix in repair Modular PVC flush box 3 module. Make- Legrand (Aretor)/ Goldmedal (WEGA)/ Schneider (Zencelo)

Supply and fixing in repair PVC insulated, stranded copper conductor of size 3 core 4.0 Sqmm in connection of Geyser to Socket with fixing arrangement all as specified and directed . Make- Polycab/ Finolex/Havells

Supply and fix electric water heater,storage type steel body with copper inner tank testing and commissioning of water heater (geyser) vertical type of 25 Ltrs capacity , single phase, vertical type, Rust Resistant, ABS made with thermal cut off with power consumption 3000 watts, ISI marked, BEE 5 star rating including fixing on wall with chroumium plated screws & nut bolts connected to existing water and electric connection complete all as specifed and directed by Engr-in-Charge. Make- Racold Pronto Neo / Bajaj/ Havells/ Venus/ Jaquar

Supply and fix hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified.

Supply and fix Cold water extension pipe 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified.

Supply and fix 15 Amps plug top, AC 230 volts, ISI marked. Make- Anchor/ Havells/ Legrand

S & F GI Tube medium grade dia 15 mm dia concealed to walls for making water connection of Geysers all as specified and directed. Make Jindal/Tata

S & F of 15mm dia Bib Taps, cast copper alloy, chromium plated, Fancy Type screwed down,high pressure,with crutch or butterfly handle, screwed bothends for ironpipe or for unions and fixed complete all as specifed and directed by Engr-in-Charge. Make : LEADER , ZOLOTO , JAQUAR

S & F of 15mm dia Stop valves, chromium plated, fancy type , cast copper alloy,screwed down,high pressure, with crutch orbutterfly handle, screwed bothends for ironpipe or for unions and fixed complete all as specified and directed by Engineer in Charge. Make : LEADER , ZOLOTO , JAQUAR

Supply and fix in repair submain wiring two single core 4 Sqmm for sub main witing with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping with fixing accessories including one run of 4.0 Sqmm copper conductor. Note :- (i) Two runs of 04 Sqmm cable, one run of 4.0 Sqmm earth cable and one run of PVC casing Capping shall be measured as one running meter. (ii) Each submain wiring shall run in seperate PVC casing caping/conduit Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

Supply and fix sheet metal enclosure 8 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make: ABB, Strandred/ Legrand

S & F , MCB SPN 63 Amps, 10 KA ratingcomplete all as specified and directed. make Siemens or equivalent in GE/Legrand

S & F , MCB SP 6-32 Amps, 10 KA rating complete all as specified and directed. make Siemens or equivalent in GE/Legrand

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. laid in duct / along pole/wall tc including making connection complete all as specified and directed by Engineer-in-Charge.Note : The cost of Al thimbles/lugs and cable gland etc to be included in quoted rate and no extra payment will be made for it.

B P ENTERPRISES

Shree Ayyappa Engineering