Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹49.7 L+₹3.7 L (8.13%)Rejected-Finance WZ 487 2 MS BLOCK HARI NAGAR NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L2 | Rejected-Finance Being other than lowest bidder | |
| 3 | L3₹50.4 L+₹4.4 L (9.52%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bidder | |
| 4 | L4₹54.9 L+₹9.0 L (19.5%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest bidder |
Tender Value
₹46.6 L
EMD Value
₹93,200
Closing Date
28 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
PROVN OF CERTAIN LBW WORKS AND MINOR WORKS UNDER AGE BR II OF GE 865 EWS LEH
2023_MES_607743_3
865/EWS(NIT-73)/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹93,200
Yes
6 Feb 2024
3 Oct 2023
4 Nov 2023
3 Oct 2023
28 Oct 2023
10 Oct 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dence soil complete all as specified and diected by Engr-in-Charge
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits,manholes, pier holes, etc. N exc 10 sq m on plan and n exc1.5 m in depth and getting out hard/dense soil,complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.
Removing excavated material n.exc 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point., complete all as specified and directed by Engr-in-Charge.
M & L for providing PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 (Design Mix) (using 20mm graded aggregates) foundations, including rafts, footings, foundation, beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of concrete, sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge.
S&F mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips , complete all as specified and directed by Engr-in-Charge.
All as per Srl Item No 08 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as per specified and directed by Engr-in-Charge.
M&L for walling of random rubble uncoursed well bonded built in CM 1:6 in retaining walls , abutment , or similar works etc, complete all as specified and directed by Engr-in-Charge.
M&L for flush pointing to random rubble stone masonary uncoursed or brought upto course in CM 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for hard core of broken stone boulders of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for filling behind the weep holes complete all as specified and directed by Engr-in-Charge.
S&F 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for precast cement concrete block masonary type with solid blocks exc. 10cm in width, C-1, (using 20mm graded crushed stone aggregate), set and jointed in cement martar 1:6 complete all as specifeid and directed by Engr-in-Charge.
M&L rendering 15mm thick in CM 1:4 concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete, type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.
S&F 18/19mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in modular kitchen cabinets/cupboards including lipping portion match with laminated colour complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
M&L rendering 15mm thick in CM 1:6 on fair or other than fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium anodized openable fixed type/sliding type door/partly panelled particle wall and partly glazed with 4.5mm thick plain glass sheet/wire mesh and 12mm particle board interior grade both side laminated and aluminium section weight not less than 0.55 Kg/RM with self closing hydraulic door closer and floor spring etc with all fittings complete all as specified and directed by Engr-in-Charge.
S&F three track powder coating for aluminium anodised window openable fixed type /sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass/wire mesh fixed with rubber gasket. The aluminium member of shutter is 65x40mm along aluminium handle and tower bolt etc complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium grills powder coated with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. each shutter shall be of 02 Nos -Aluminium handle, 03 Nos of Aluminium hinges, complete all as specified and directed by Engr-in-Charge.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters,including aluminium jali of 10 mm thick design/pattern as approved and side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified and directed By Engr-in-Charge.
S&F plain sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square or fixed with aluminium section including rubber beads not exceeding 0.5 Sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F plain sheet glass 4.80 mm thick, ordinary quality and glazing with oil putty in square or fixed with aluminium section including rubber beads exceeding 0.5 Sq. m in each pane complete all as specified and directed by Engr-in-Charge.
M&L for 1.50mm thick wall care putty on wall surface complete all as specified and directed by Engr-in-Charge.
M&L for two coats of plastic emulsion paint over a coat of primer on wall including preperation of new plastered surfaces of walls complete all as specified and directed by Engr-in-Charge
S&F Aluminium door closer hydraulically regulated designation No 3 , universal type, suitable for door shutters upto 700mm in width and weight not more than 35 kg and fixed compelte all as specified and directed by Engr-in-Charge. Make : As per PS.
S&F brass handles 150mm long polished bright with brass screws complete all as specified and directed by Engr-in-Charge.
S&F 125mm long brass butt hinges type C11 with brass screws fixed to wooden doors complete all as specified and directed by Engr-in-Charge.
S&F 200mm long brass barrel tower bolt with brass screws in new position complete all as specified and directed by Engr-in-Charge.
S&F 250mm long brass sliding door bolts fixed with brass screws to wooden doors complete all as specified and directed by Engr-in-Charge.
Providing and fixing 30mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture. The density of the door shutter not less than 600Kg /Cum should be 100% lead free door complete all as specified and directed by Engr-in-Charge.
S&F 100mm long extruded brass handle cast fabircated type polished complete all as specified and directed by Engr-in-Charge.
S&F 30mm width of flaps (when open) continous piano hinges, brass complete all as specified and directed by Engr-in-Charge.
S&F magnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and directed by Engr-in-Charge.
S&F factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63mm single rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed by Engr-in-Charge.
M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed by Engr-in-Charge.
M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base floor complete all as specified by Engr-in-Charge.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified by Engr-in-Charge.
M & L for joint free Non-Skid coloured ceramic coloured tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surfaces of size (350x250x7mm /450mm x 350mm x 7mm thick/ first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments. (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thick screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.
M&L for vitrified tiles dark shade/double charged/ shade of 10 mm thick (square/rectangular) polished bright, area of tiles of size 600mmx600mm as in floors/skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in cement mortar 1.6 complete all as specified and directed by Engr-in-Charge. Make as per PS.
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.
S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings like elbow, socket, FTA, MTA etc fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.
S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings like elbow, socket, FTA, MTA etc fixed complete to walls, ceilings or in floors etc. including all fittings for fixing to walls complete all as specified and directed.
S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints, laid in trenches or in floors cement complete all as specified by Engr-in-Charge.
S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints, fixed to walls complete all as specified by Engr-in-Charge.
S&F PVC (SWR) 110mm bore bends any radius, complete all as specified and directed by Engr-in-Charge.
S&F PVC connections 15mm size with chromium plated nuts of length 600mm complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No ALD-8058 or equivalent in Cera/Hindware
S&F 15mm bore Angle valve one way, chromium plated cast copper alloy screw down, fancy type complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No ARI-39053 or equivalent in Cera/Hindware
S&F chromium plated brass paper holder with flap guard fixed on walls complete all as specified and directed. Make Jaquar Cat part No AKP-CHR-35753P or equivalent in Cera/Hindware
S&F chromium plated, brass bib tap, fancy type, screwed down , screwed for iron pipe or for brass ferrule 15 mm bore etc (Min weight 350 gms) complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No ARI-39037 or equivalent in Cera/Hindware
S&F sheet glass shelf assembly fixed on wall with screws complete all as specified and directed. Make Jaquar Cat part No ACN-1173 or equivalent in Cera/Hindware
S&F towel rack chromium plated brass fixed to walls with screws complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No AKP-35781PS or equivalent in Cera/Hindware
S&F chromium plated brass towel ring fixed with and including chromium plated brass screws complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No AQN-7721 or equivalent in Cera/Hindware
S&F soap dish fixed with and including chromium plated brass screws complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No AKN-35731P or equivalent in Cera/Hindware
S&F chromium plated brass 32mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat part No ALD-725 or equivalent in Cera/Hindware
S&F 75mm bore PVC (SWR) pipe bends any radius complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage tank, inner and out white, three layers, ISI marked (cylindrical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, complete all as specified and as directed by Engr-in-Charge. Make as per PS.
M&L for 20 mm thick granite machine cut, (of any type) work (table rubbed and polished) in steps, jambs, pillers, window cills, cooking plateforms and jointed with grey cement slurry and pointed with white cement with admixiture of pigment to match shade of granite stone including and polishing screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM as directed complete 1:6 complete all as specified and directed by Engr-in-Charge.
S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.
M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.
M & L for providing and fixing particle boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.
M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F PPR gate valve 20mm (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.
S&F PPR gate valve 25mm (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed complete all as specified and directed by Engr-in-Charge.
S&F 25mm bore, ball valves (brass insert) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram) conforming to ISO 2000 complete all as specified and as directed by Engineer-in-Charge.
S&F wash hand basin table top type fixed on granite top grooving and cutting if required complete, all as specified and as directed by Engr-in-Charge. Make: Jaquar Cat Part No SLS WHT-6011 or equivalent in Cera/Hindware
S&F pillar tap single lever tall body with 150mm extension body fixed on granite top for supply of hot or cold water fixing with washers complete all as specified and directed by Engr-in-Charge. Make Jaquar cat part No ARI 39005B or equivalent in Cera/Hindware
S&F hand shower (health faucet) CP with 8mm dia 1.2 metre long flexible tube and wall hook complete all as specified and directed by Engr-in-Charge. Make Jaquar cat part No ALD-573 or equivalent in Cera/Hindware
S&F Harrison rails, anodised alloy, with fixing end brackets , stops, dooms etc complete set fixed on wall or wall panels compelte all as specified and as directed by Engr-in-Charge.
S&F single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795 mm complete all as specified and directed. Make: - Jaquar cat No KUSWHT-358515N, or equivalent in Hindware/ Cera
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed.
Demolition of un reinforced cement concrete as in ground floor of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring and finished surface as in to receive tiles complete all as specified by Engr-in-Charge.
Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land.
M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated FRLS copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.
All as per item No 84.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.
All as per item No 84.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.
M&L for point wiring for 3 pin 15 Amps socket outlet independent with FRLS copper conductor cable PVC insulated multistandard 2.5 sqmm with 1.5 Sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing caping with sunk cast iron complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type single pole one way 5 Amps ISI marked complete all as specified and directed by Engr-in-Charge.
S&F ceiling rose surface backlite two or three terminal complete all as specified and directed by Engr-in-charge.
S&F decorative durable LED batten fittings with LED tube 28 watts, 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube including LED retrofit, 4 feet long (white colour) tube of 28 watt having driver, connector block etc with all accessories prewired and connecting to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge. Make : Havells/Bajaj/Philips/Wipro
S&F bulk head light fitting of 13 watts including necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose /PVC connector to light fittings complete all as specified and directed by Engr-in-Charge
S&F switch socket combination, 5 pin, 5 & 15 Amps piano flush type single pole ISI marked complete all as specified and directed by Engr-in-Charge.
S&F switch socket combination, flush type 3/5 pin, 5/6 Amps piano flush type single pole ISI marked complete all as specified and directed by Engr-in-Charge.
S&F socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engr-in-Charge.
S&F recessed mounting white LED luminaries 36 watt, 2x2 (warm/white) powder coated sheet housing LED front frame with translucent cover fixed to the housing fixed in front frame extruded aluminium heat sink projected in false ceiling and connection of 3 core coppper wire with all acessessories complete all as specified and directed by Engr-in-Charge.
S&F Exhaust fan fancy type, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 mm complete all as specified and directed by Engr-in-Charge. Make Havells or equivalent in Bajaj/Crompton Greaves.
S&F sheet metal enclousure SPN DBs with 200 Amps rated bus bar of 12 way 240 volts with blank plate complete with double door complete all as specified and directed by Engr-in-Charge.
S&F sheet metal enclousure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door complete all as specified and directed by Engr-in-Charge.
S&F for MCB SPN 40 Amps 'C' series, 230 volt, 10 KA complete all as speciied and directed by Engr-in-Charge
S&F MCB TPN 63 Amps, 415 VOLTS 'C' series complete all as speciied and directed by Engr-in-Charge
M&L for Sub main wiring with two run of 6.00 Sqmm (2x6.00 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6.00 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6.00 Sqmm (2x6.00sqmm), one run of 6.00 Sqmm (1x6.00 sqmm) cable and one metre of PVC casing caping will be measured as one unit.
M&L for Sub main wiring with two run of 10.00 Sqmm (2x10.00 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 10.00 Sqmm (1x10.00 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 10.00 Sqmm (2x10.00Sqmm), one run of 10.00 Sqmm (1x10.00 Sqmm) cable and one metre of PVC casing caping will be measured as one unit.
S&F MCB SP 6-32 Amps 'C' series complete all as speciied and directed by Engr-in-Charge
Supply and laying, jointing and testing cable, LT XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor in size 50 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge. Make as per PS.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of stranded multistrand conductor of size 16 Sqmm complete all as specified and directed by Engr-in-Charge. Make as per PS.
S&F decorative ultra slim linear LED light fittings 20 watts, 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube 1x20 W LED including LED retrofit, 4 feet long (white colour) tube of 20 watt having driver, connector block etc with all accessories prewired and connecting to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.
S&F Ellipse Neo Hexa bulkhead light fittings 13.5/15 W LED 6000K with connection 3 core copper wire ceiling rose to fitting with complete accessories complete all as specified and as directed.
S&F sheet metal enclousure SPN DBs with 200 Amps rated bus bar of 08 way 240 volts with blank plate complete with double door complete all as specified and directed by Engr-in-Charge.
Supply and fix in replacement of Off load Change over switch (Side handle) with advance neutral, 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directed.
M&L for lamp holder, PVC/polycarbonate type with black plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
S&F LED lamp 9W, 230 volts, 50 Hz AC complete all as specified and directed by Engr-in-Charge
M/S SHIV SHAKTI ENTERPRISES
PARIDHI CONSTRUCTION
RV. Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .