SPECIAL REPAIR TO CERTAIN BLDGS, PROVN OF BATHROOM AT TREHGAM AND CHOWKIBAL UNDER THE AOR OF GE 874 EWS.

Amount

Demolition of brick work or stone masonry built in cement mortar complete all as specified and as directed.

M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed.

All as per item No 2 above but except brick complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 20mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for raised pointing to random or polygonal rubble, un-coursed or brought up to courses in cement mortar 1:4 complete all as specified and as directed.

M&L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified and as directed.

M & L applying one coats of cement base paint over a coat of primer including preparation of old plastered surface of wall complete all as specified and as directed.

M & L applying two coats of oil bound distemper including preparation of newly plastered surface of wall over and including 3mm thick wall care putty complete all as specified and as directed.

M & L applying one coats of oil bound distemper including preparation of old plastered surface of wall complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item ser No 15 above but plain sheet as in roof covering /cladding to wall fixed with tapping screws complete all as specified and as directed.

M&L for excavating in post holes (or similar holes) each n exc .50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and getting out in soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work complete all as specified and as directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and as directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and as directed.

M & L for mild steel work as in roof truss compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, any type of sections in vertical post etc of Fe-410W grade E 250 quality A complete all as specified and as directed.

M & L for mild steel work rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410 -W (Gde E- 250) quality -A complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B0(using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:5 complete all as specified and as directed.

S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 25mm thick PCC 1:2:4 type B0(using 12.5mm graded aggregate) and 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 15mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L 20mm thick granite (of any type) work ( table rubbed and polished) in steps, jambs, pillar, window cills, cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Dismantling of wooden boarding, any description, fixed in any position with nails complete all as specified and as directed.

M & L for 2nd class soft wood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.

M & L for 2nd class clean sawn battens at 30 cm centre to centre of sectional area of 5 but not exc 15 sqcm complete all as specified and as directed.

M & L for 2nd class hardwood boarding 30mm thick fixed with nails in any situation (except flooring and skirting), planed one side and edges tongued and grooved or rebated complete all as specified and directed.

S&F eaves boarding of 20mm thick of soft wood 2nd class with nails in any situation (except flooring and skirting), planed one side with butt joints complete all as specified and as directed.

S & F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work as in wall complete all as specified and as directed.

M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminum snap grid frame work of same size as aluminum Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminum Tee as cross runner and aluminum angle of size 25x25x1.25mm at the perimeter including Gl 6mm adjustable suspender of required length of any description complete all as specified and as directed. Note:- The design and specification of the ceiling board to be approved by GE.

M & L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc 6 Sqcm in section, wrought fixed with nails complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm and n exc 4 sqm sqm each with shutter (without taking off shutter from frame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each (without taking off shutter from frame) complete all as specified and as directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

S& F 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping, frame to match complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skeleton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I, Section-8, clause 8.24 (b) complete all as specified and directed.

S & F in repair for 18/19 prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanized width of flaps (when open) 30mm complete all as specified and as directed.

S & F 250 mm long aluminum alloy anodized sliding door (boil type) and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

S&F pre-coated sheet type door spring, heavy type, 300 mm long including roller and roller plate complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminum alloy, anodized barrel tower boll of extruded section completes all as specified and directed

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S&F for 75mm long mild steel butt hinges medium weight cold rolled all as specified complete all as specified and directed

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

M & L for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a priming coat with red oxide primer over new steel surface over 10 cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and as directed.

M & L for applying one coats of synthetic enamel paint over wooden surface including preparation of old wooden surface exc 10 cm width or girth complete all as specified and as directed.

S& F in repair stainless steel curtain road of 25mm dia of 0.80 mm to 1mm thickness including brackets, stops, roller etc complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified complete all as specified and as directed.

M &L for providing reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as in flat complete all as specified and as directed

S & F for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed not less than 0.90mm dia) complete all as specified and directed.

S & F in repair 15mm size PVC connection with PTMT nuts of length 600mm complete all as specified and as directed.

M & L for cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and as directed.

M & L for 15mm bore `medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for lagging to pipes 15mm bore used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

M & L for lagging to pipes 20 mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

S&F in repair bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 including waste pipe complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified and as directed.

S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including complete all as specified and as directed.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

M & L for 1000 Litre capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 litres complete all as specified and as directed.

S & F of ISI Marked 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S& F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

S& F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 type C-1 (using 20mm stone aggregate) as in paving, plinth protection etc, surfaces finished even and smooth without using extra cement and dividing into panels not exc 1.20 Mtr each complete all as specified and as directed.

Surface excavation n. exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n. exc 1.5m in depth for foundation etc in soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and as directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Returning and filling including spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed.

Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and as directed.

M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and as directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft eams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and as directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygonal flat rough finished surfaces of concrete complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M& L for rendering 15mm thick in cement mortar 1:4 on othe than fair faces of brick work or stone surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only approved integral water proofing compound complete all as specified and directed.

M&L material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L hard core filling under floor, breaking stone or boulder exc 63mm and n.exc 100mm gauge of sand stone complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing etc complete all as specified and as directed..

M&L for 6mm thick plywood (5 Nos of ply) grade BWR type BB fixed with nails to timber frame works, fixed in lining/walls complete all as specified and as directed.

M & L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dove tailed or welded including one shop coat of zinc Chromites primer complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.

S&F Mild steel pressed handle, oval type stove enamelled, black size of handle 100mm complete all as specified and as directed.

Mild steel tower bolt stove enamelled black 100mm long black with bright bolt and fixed complete all as specified and as directed.

S&F MS flat iron as in hold fast complete all as specified and as directed.

M&L PCC type B-1, 1:2:4 (20 mm graded stone aggregate) as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, complete all as specified and as directed.

S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed.

S&F wall mixer chromium plated 15mm dia complete all as specified and directed.

S&F chromium plated shower rose 125mm size complete all as specified and directed.

S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink complete all as specified and as directed.

Soap dish, Vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and as directed.

M&L for PVC (SWR) reducer 110/75mm complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

All as per item no 22 above but erection & fixing only.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Blank

M&L 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed.

M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down shutters n exc 1 Sqm each complete all as specified and directed.

Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed.

M & L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and as directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and as directed.

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and as directed.

M&L for PCC M-10 (Nominal mix) type C-1 using 20mm graded aggregate as in surface channel and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for 14 to 16 mm thick green marble slab for kitchen plate form/shelf and vertical faces duly machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing of type including 15mm thick screed bed layer of cement mortar 1:6 complete all as specified and directed.

All as per item No 134 here in before above but fixing only.

M&L for 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

All as per item No 19 here in before in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and as directed.

M&L brick work with fly ash old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6. complete all as specified and as directed.

M&L brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls, in cement mortar 1:4 complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick, stone or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Dismantling of existing PVC (SWR) pipes 110 mm bore complete all as specified and as directed.

Dismantling of existing PVC (SWR) pipes 75 mm bore complete all as specified and as directed.

M &L 10mm thick coloured paver tiles of size 300 x 300mm over and including a layer of 15mm thick screed bed in C.M 1 :4 joints filled with coloured cement to match complete all as specified and as directed.

M & L for stne walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

All as per Item as per item No 162 above but except stone.

Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone complete all as specified and as directed.

M & L for providing pre-cast cement concrete type C-1 (1:3:6) (20mm graded aggregate) as in bond stone with solid blocks exc. 10 cm in width and setting in mortar 1:4 complete all as specified and as directed.

M & L for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required levels complete all as specified and as directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

M & L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

All as per Item No 168 herein before but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board.

All as per Item No 168 herein before but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per Item No 168 herein before but wiring with 2.5 sqmm copper wire (FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed.

S&F switch socket combination 2 in 1, 6A flush type complete all as specified and directed.

S&F switch socket combination 3 pin 16A, flush type complete all as specified and directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix LED warm Bulb 9 Watt complete all as specified and directed.

S&F building security light fitting in repair LED 35 Watt for energy saving and environmental friendly long life made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 including driver unit and bracket made up of GI tube of suitable size (1.2 Mtr Length) etc complete all as specified and directed.

Supply and fixing in replacement exhaust fan AC single phase, 1200 rpm 230/240V of size 250mm sweep with louvre heavy duty complete all as specified and directed.

Supply and fix in replacement, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V, fixed sunk/flush to the wall complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 16 Sqmm complete all as specified and directed

M & L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion all as specified and directed.

All as per item No 168 herein before but wiring with 4 sqmm copper wire (FRLS) and 4 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers, shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm sweep complete with fixing arrangement and connection including cutting chasses hole in the wall for exhaust fan etc complete all as specified and directed.

Taking up or down steel tubing of 25 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of ser item No 192 above but 50 mm bore pipe.

S&F GI water tubing 25 mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and directed.

All as per description of ser item No 194 above but 50mm bore pipe.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed.

M&L Cutting existing GI water tubing 40 or 50 mm bore for alternations or addition including screwing/threading and jointing with suitable size GI socket/DI specials complete all as specified and directed.

M&L Cutting existing GI water tubing 20 or 25 mm bore for alternations or addition including screwing/threading and jointing with suitable size GI socket/DI specials complete all as specified and directed.

M/S ASMATULLAH SHAH (BID ID -3414126)

MS SHEIKH NADEEM AKBAR (BID ID -3408127)

Concept Engineering & Constructions (BID ID -3415745)

M/S GHULAM AHMAD BABA (BID ID -3414999)

Bidder Name

M/S ASMATULLAH SHAH

POPULARHARDWARESTORE

M/S GHULAM AHMAD BABA

Concept Engineering & Constructions

MS SHEIKH NADEEM AKBAR