REPAIR REPLACEMENT AND MAINTENANCE TO UNSERVICEABLE STREET LIGHT FITTINGS INCLUDING LED FITTINGS GARDEN LIGHTS POST TOP LANTERNS AND ALLIED WORKS AT RANGE HILLS AREA AND AUNDH MILITARY COMPLEX UNDER GE MH AND RH KHADKI

Taking down old Unsv LT UG cables of size upto 50 Sqmm from trenches / poles / ducts etc complete all as specified and directed.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by Engr-in-Charge for following sizes:- Make :- Havells / Gloster / Finolex / Polycab NOTE :- Earth work , bricks , riddled earth , GI pipe for protection of cable will be measured & paid under under relevant items of schdule .

50 Sqmm 3.5 core .

35 Sqmm 3.5 core

25 Sqmm 3.5 core

16 Sqmm 4 core.

10 Sqmm 2 core

6 Sqmm 2 core

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

Ditto item No. 3 above but in hard/dense soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified & dierected.

Returning, filling in soil including spreading levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

Material and Labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as specified and directed. Note - Punned thickness shall only be measured & paid .

Material & Labour for road cutting / foot path and making good with PCC M-10 grade (nominal mix) using 40 mm graded stone aggregate of 150mm X 100mm in respect of width and thickness complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for under ground cable complete all as specified and directed.

Supply & fixing in repair light grade GI pipe of size 40 mm dia conforming to IS 1239 (Part-1): 2004 laid in trenchs or under floors or fixed on pole for cable protection complete all as specified and directed.

Supply & fixing in repair light grade GI pipe of size 80 mm dia conforming to IS 1239 (Part-1): 2004 laid in trenchs under floors or fixed on pole for cable protection complete all as specified and directed.

Material and Labour for plain cement concrete (PCC) 1:3:6, type C2 (40mm graded stone aggregate) for making foundation of Pole/stay assembly complete all as specified and directed.

Material and Labour for plain cement concrete (PCC) 1:3:6, type C1 (20mm graded stone aggregate) for making copings of Poles etc complete all as specified and directed.

Material and labour in repair for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete all as specified & directed Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

Material and labour in repair for earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level , connected to 32 mm x 6 mm GI strip as earthling lead by means blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame, 50 MM dia GI pipe light grade for protection of wire/strip etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed on testing on completion. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

Material & Labour for detection of street light cable fault with and including technician, cable fault location inachive kit detect the cable fault, including necessary excavation of soil / road, hard standing, foot path and refilling the soil, after jointing the faulty cable with new straight through joint kit, testing of cable complete all as specified & directed Note: Cable joint of required size shall be measured and paid separately under relevant item of this BOQ as Supply & fixing .

Supply and fix joint, heat shrinkable type straight through joints for joint LT UG cable 1100 volts grade of size upto 16 sqmm, 2 core/ 3.5 core/ 4 core, complete all as specified & directed

Supply and fix joint heat shrinkable type straight through joints for joint LT UG Cable 1100 volts grade of size 25 to 50 sqmm, 3.5 core/ 4 core, complete all as specified & directed

Supply and fix in repair brass terminal of capacity 63 Amp/ 100Amp 4 pole complete with nut, bolts, washer, complete with backlite/ fibre insulator complete including fixing inside street light junction box complete all as specified and directed .

Taking down old unserviceable rusted damaged street light pole of any type from site complete all as specified and directed.

Supply and errect in vertical position Steel tubular swaged poles in repair, type 410 SP- 31 (09 mtr long) with 300mm x 300mmx6mm mild steel plate continiusly welded to pole, final taper plug, bolts,nuts and screws and making holes as per requirement all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying one coat of red oxide primer, making 05 Nos strip each 30 cm high with super enamel paint ( Black and yellow) from ground level / coping upto 1.5 meter, painting with two coats of aluminium paint for the remaning height complete all as specified and directed. Note :- PCC in foundation, copping, excavation and earth work shall be measured and paid separately under relevent items of sch.

Taking down old unserviceable Flood light fitting of any type/capacity from its location complete all as specified and directed.

Supply and Fix in repair LED Flood light fitting of capacity 120 watts made up of pressure die cast aluminium housing with toughned glass and high power LED's and secondary lenses, having system efficiency greater than 110 lumen per watts with surge protection device included. The luminaries shall be totally enclosed dust and water proof with minimum IP -66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable for making connection (upto 9 mtr length), complete all as specified and directed by Engr-in-charge. Make :- Halonix/Crompton/Havells/Philips/Benlo.

Ditto all as per item No. 23 above but for capacity of 150 watts

Ditto all as per item No. 23 above but for capacity of 200 watts

Dismantling and Taking down old unserviceable street light fitting of capacity upto 120 watts from its location complete all as specified & directed.

Supply and Fix in repair LED Street light fitting of 90 Watt / 100 Watt (Cool White) including LED lens complete with body robust, corrosion resistant, superior finish, made up of high pressure die cast aluminium alloy housing. The luminaries shall be totally enclosed, dust and water proof with minimum IP - 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 to 300 V, AC, frequency 50 to 60 Hz, P.F should be more than 0.95 with Total Harmonic Distoration THD(I) less than 10% , cool white colour and lamp starting time should not be more than 10 second fitting should be provided with 10 KV surge protection. Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection . The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including provision of connection for street light from pole box with 2.5 Sqmm PVC insulated stranded copper conductor FRLSH cable (upto the lenght of 9 mtr) complete all as specified and directed by Engineer-in- charge. Make :- CROMPTON / HALONIX /BENLO

Ditto as per item No. 25 above but for capacity of 60 Watt Make:- CROMPTON/ HALONIX /BENLO

Ditto as per item No. 25 above but for capacity of 45 Watt Make:- CROMPTON / HALONIX /BENLO

Supply & fixing in repairs Bracket for fixing of street light fittings bend to shape, made out of 40 mm dia GI pipe medium grade upto 1.5 mtr long fixed with two sets of MS clamps made out of flat iron of size 50 mm x 6 mm fabricated to shape and fixed with nuts bolts and washers & two coats of aluminium paints over and including a coat of red oxide primer complete all as specified and directed by Engr-in-Charge (Note : MS clamps, nuts, bolt and washer shall be measured seperately under relevant item)

Supply & fixing three core PVC insulated and FR PVC round sheathed, copper conductor 1100 volts grade cable of size 1.5 sqmm (multi stranded) complete all as specified and directed by Engr-in-charge.

Supply & fixing in repair LED post top lantern 40W aluminium housing, with IP 65/66 protection, clear acrylic diffuser, die cast aluminium spigot , spun aluminium powder coated top cover complete with accessoires with suitable size 40/50/60 mm outer dia GI pipe and plastering work wherever reqd complete all as specified & directed. Make :- Halonix cat No. HLPT-04-40-CW or equivalent in Crompton/ Wipro/Surya.

Supply & fixing in repair junction box of size not less then 325mm x 220mm x 150mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 66 / 67 for outdoor Installation with internallly embedded gasket (PUR) including the box fitted with connector 8 way 40 Amps 01 No including Emlex stud type TB 4 Nos incoming / outcoming cable at controlled with MCB SP 6 Amps 01 No & enclosed along pole including fixing with steel tubular poles with two Nos FI clamps 25mm x 3mm with nuts, bolts and washers complete and making connection with 1.5 sqmm copper conductor unsheathed FRLS PVC insulated 3 core from junction box to security lights fittings duly laid inside the streel tubular pole and bracket complete all as specified & directed. Note : (40 mm bore GI pipe light grade, 3 core 1.5 sqmm cable and GI brackets will be measured separately . Make :- Sintex Cat Part No. GSJB-3726 or equivalent in Indokop / Hensel Note :- Cost of flat iron clamp is deemed to include in unit rate of this items.

Supply only LED Drivers of street light fitting suitable for 45 watt / 60 watt capacity street light fitting complete all as specified and directed.

Supply only LED Drivers of street light fitting suitable for 90 watt / 100 watt / 120 watt capacity street light fitting complete all as specified and directed.

Material and Labour for surface preparing by old paint removing by scrubbing with embry paper / wire brush and painting to steel tubular pole 9/11 metre long (any type) with two coats of epoxy based paint aluminium grade paint over and including one coat of red oxide primer and painting up to 1.5 Mtr above PCC coping in black and white strips 5 Nos each 30 cm high starting from bottom of pole including writing of pole number with black enemelled paint of 25 mm high letters in 10 cm dia circle in white paint complete all as specified and directed.

Supply and fix in repair Astro time switch with more than 100 hrs battery back up working on 240 volts , 50 Hz AC supply as per cat No AUTS02AST00 of L&T make or equivalent make of Indoasian/Havells .

Supply and fix in repair 4 pole power contactor of capacity 63 Amps , 415 volts AC for street light timer panel complete all as specified and directed.

Supply and fix in repair MCB 4 pole of capacity 63 Amps "C" curve , 415 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed.

Supply and fix in repair MCB SP of capacity 6 Amps to 32 Amps "C" curve , 240 volts including necessary disconnection of incoming and outgoing cable complete all as specified and directed.

Material and Labour for triming of tree branches with in 2.0 mtr on either side of the electric line/Steet light poles and timmer panels and E/M installation with suitable T & P and desposing the waste complete all as specified and directed.

Material and Labour for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Taking down unserviceable street light panel and Supply, install, commissioning and testing of street light panel outdoor type 415 V/440 Volts of size not less then 0.6 mtr x 0.6 mtr x .03 mtr, confirming to IEC 61439 with IP-54 protection of suitable size made out of 3.15 mm thick CRCA sheet with locking arrangement and complete panel should be powder coated with having neoprene rubber gasket for sealing door, doors of the panel should be removable type, 3 ph indicators lamp etc with provision for 02 Nos of 2 Pole 32 Amp MCB out going, 01 No Incoming TPN 63Amp with Analog street light timer cat No AUTS02AST00 of L&T, copper panel control wiring as per IS direction,make internal compartment for mounting MCBs, the panel shall be mounting on 50 x 50 x 6 mm MS angle iron and 60 cm above the normal ground level & embedded 20 cm below ground level in PCC foundation (1:2:4) type B 1 (20mm graded stone aggregate), connect new UG cable for Incoming from LT panel cable shall enter through cable glands for safety of cable where enter through panel complete all as specified and directed by Engr-in-charge.

Please Enable Macros to View BoQ information