Provn of tiling in room and verandah of M Zone md accn in 34 x qtrs of 22 GARH RIF and certain Rev Wks under GE (East) Fzr Cantt

Amount

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified and directed

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed

All as per item 4 above but using old bricks retrieved from demolition under item 3 above including cleaning and removal of mortar from old bricks.complete all as specified and directed

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed

M&L 25mm thick PCC type B-0, (1:2:4) (using 12.5mm graded crushed stone aggregate for slope correction etc complete all as specified and directed

M&L 50mm thick PCC type C-1, (1:3:6) using 20mm graded stone aggregate as in plinth protection complete all as specified and directed

M&L design mix Reinforced cement concrete (1:1.5:3) type A-1 using 20mm graded stone aggregate as in slabs supported on walls, beams, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. NOte: (form work and reinforcement shall be measured and paid separately).

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished) complete all as specified and directed

M&L Mild steel 10 mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia FE-500/550 confirming to IS-1786-1985 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone wall & etc including racking out joints hacking for Key scrubbing down with water etc.

M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished fair and even complete all as specified and directed

M&L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished fair and even complete all as specified and directed

M&L Rendering/plastering, 5mm thick in cement mortar (1:3) on ceiling surfaces, surfaces finished fair and even complete all as specified and directed

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper and proper finished of new plaster surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint, white or tinted on newly plastered wall surface including preparation of surface.complete all as specified and directed

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash on ceiling and proper finished surfaces complete all as specified and directed

Dismantling terrazzo/ glazed tiles etc as in floors/skirting/ dado including cement mortar bedding ( but not backing ) complete all as specified and directed

M&L brushing neat cement slurry with 3.0Kg/Sqm on top of hacking surfaces for floor tile complete all as spd and as directed

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and incl 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile complete all as specified and directed

M & L Glazed Ceramic coloured tiles vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with coloured/white cement mixed with pigment to match colour of tiles complete all as specified & directed.

All as per item No-21 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.complete all as specified and directed

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate. complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigments confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 50mm thick layer of sand cushioning complete all as specified and directed

M&L for applying three coats of white wash on new plastered wall surface including preparation of surface.complete all as specified and directed

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O complete all as specified and directed

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed

M&L green marble 16mm thick used in floor, pillar and cooking platforms and like jointed in white cement slurry over 20mm thick screed bed in CM 1:6 incl pointing in white cement 1:2 using marble dust and admixture pigment to match the shade complete all as specified and directed

Harmesh Kumar Sharma and Sons

M/s S B Construction Company

M/S N Maini Constrution

HAPPY ELECTRICALS

ABHISHEK AND COMPANY

RAKESH KUMAR SATISH KUMAR