COMPREHENSIVE REPAIR B/R AND E/M WORKS IN 108 TA INF BN, 372 ASC SUPPLY AND OTHER SMALL UNITS IN THE AREA OF AGE B/R-I UNDER GE SAUGOR

Amount

Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub bases of floors, etc finished the surface even and rough to receive the topping layer complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed.

M & L for 9 to 10 mm thick coloured vitrified tiles area of each tiles not exceeding 0.36 sqm in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

All as per Srl item 04.00 above but in dado / skirting etc over 10 mm thick rendering in CM 1:4 complete all as specified and all as directed.

M&L Non skid ceramic coloured tiles 8 to 10 mm thick (Square/rectrangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors, as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

All as per Ser item No. 6.00 above but in dado / skirting etc. over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match,including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm mm thick (Square/ rectrangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm, in floors as joint free etc over and including 15 mm thick cement screed bed in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match,including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L, for glazed ceramic joint free coloured tiles of size 450x 300 x 7 mm thick, on vertical surfaces as joint free such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete,including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L provn Machine cut kota stone slab of area not less than 0.30 sqm as in flooring as in landing and entrance of staircase, etc. 20mm - 25mm thick laid laid over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

All as per BOQ Serial item No. 11.00 but as in skirting / dado /risers of steps with & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 sq. m but not exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each etc complete all as specified and directed.

Taking down of aluminium frames with shutters exceeding 2.0 sqm each & refixing after making serviceable in same opening including easing and adjusting, renewal of unserviceable screws and conditioning of floor spring ,including all necessary fitment for repair complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with wood grain sheet) reinforced with MS square tube, fixing in opening as per specification complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick, with wood free EPS with 2,4 or 6 raised panel design with 4 mm thick 3D wood grain moulded PVC sheet on the front face & 4 mm thick plain wood grain PVC sheet on back face, centre core will be PVC pattern supplying & fixing in frame at site as per specification including 3 Nos 100 mm stainless steel butt hinges complete all as specified and directed.

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed.

S&F 30mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels commercial type on both side including both side decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved & fixed with approved adhesive as per manufacturer instruction complete all as specified and directed.

S&F, second class hard wood, factory made 35mm thick glazed and skeleton shutters factory made, open rebated and prepared to receive glass, gauge, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and directed.

S&F Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F aluminium windows with sutter sliding type three track powder coated consisting of frame bottom of size min 92 X 31.75 mm,side and top of size min 92 X31.75, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick plain sheet glass with rubber gasket,brush and aluminium beading , handle , aluminium grill with fixing arrangement (wt. of grill not less than 2.50 kg/sqm), aluminium wire mesh 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS, complete all as specified & directed. (Weight of Aluminium section of shall be 0.55 as per IS)

S&F fixed type ventilators powder coated of aluminium with frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick Pin Headed glass and half portion will be fixed with louvers with 4mm thick pin headed glass with rubber gasket and aluminium beading, aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified & directed. (Aluminium section thickness should have min thickness 1.50 mm).

S& F aluminum door powder coated of any colour consisting of frame of 100mm x 44.5 mm size with shutter fixed on frame with hydraulic door closer with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80 x 44.45 mm & style of door shutter is 83mmx 44.45 mm glazed with 5mm thick tinted /frasted glass of approved make with handles 2 Nos of 200 mm long in each door , 04 Nos 100 mm SS hinges has fitted on frame as required fixed with rubber gasket & aluminum beading, any No of panels with aluminum handle , locking arrangemen,hydraukic door closer and floor door stopper incl. necessary joining cleats , glazing clips etc complete (aluminum section thickness not less than 2 mm) confirming to IS complete all as specified and directed.

M&L preparing new surfaces of wood & wood based material over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F butt hinges 100mm ISI Marked, long extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) ISI Marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) ISI Marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F MS 150mm, single action spring hinges with steel wire spring, stove enamelled, black complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position/condition complete all as specified and directed.

S&F pre- coated galvalume aluminum zinc coating GI based profile pattern steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated, ec) sheets roofing complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified & directed. including dismantling of Asbestos cement (corrugated, semi corrugated, ec) sheets roofing complete all as specified and directed.

S&F structural steel work as in tubular trusses ,purlin,rafters including special shaped washer complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment Gde Fe 410-O or Fe 310-O complete all as specified and directed

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts including dismantling of Asbestos cement (corrugated, semi corrugated, ec) sheets roofing in any condition complete all as specified and directed.

All as per item no 39.00 as above but except sheets complete all as specified and directed.

S&F 6mm thick Asbestos cement two piece adjustable plain wing ridge, fixed with L-type or J-type or cranked hook bolts including dismantling of Asbestos cement (corrugated, semi corrugated, ec) sheets roofing in any condition complete all as specified and directed.

Supply and fix 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) Design Lake & hill as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion and dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and any description, including cover fillets etc, complete all as specified and directed.

S&F in repairs of 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod/pulmets and making good complete all as specified and directed.

M & L for Green Marble work 18 to 20mm thick(table rubbed and polished,) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.

S&F 18mm to 20mm thick solid factory made PVC board for cupboard /kitchen cabinate shutter with one side 1mm thick printed pvc sheet other side plain pvc sheet suitable fixed with &including suitable pvc frame, matching colured beading to cover all edges & screwed portion of frame, Magnetic catcher with all necessary fixing arrangement as per specification & drawing including taking down existing wooden cupboard/cabinet complete all as specified & directed.

M & L for Machine cut cudappah stone in racks, cup boards,shelves etc slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade Of the slab including ,making grooves in walls to insert, rubbing and polishing complete all as specified and as directed.

Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L RCC 1:2:4 (nominal mix) type B1 using 20mm graded stone aggregate as in landing, cooking platforms, shelves and the like complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete wall, floor and roofs sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking up or down steel tubing & connections incl cleaning for re-fixing or removal from site for 15 mm dia bore complete all as specified & directed..

S&F 15mm dia tubes medium grade gavanised with all fittings and fixed complete to walls and ceiling or laid in floors complete incl the holes in walls and floors shall be bade by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

Taking up or down steel tubing & connections incl cleaning for re-fixing or removal from site for 20 mm dia bore complete all as specified & directed.

S&F 20 mm bore of GI Tubing medium grade with all fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but n.exc 500 ltr and S&F 500 ltr capacity of rotational moulded polyethyline water storage tank, ISI Marked, (Cylindrical vertical with screw lid) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n.exc 1000 ltr and S&F10000 ltr capacity of rotational moulded polyethyline water storage tank, ISI Marked, (Cylindrical vertical with screw lid) hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and directed.

S&F in repairs 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixedm complete all as specified and directed.

S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe fixed, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 254mm, bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair of stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' Trap, etc complete all as specified and directed complete all as specified and directed.

S&Fin repairs PVC low level flushing cistern of 10 Ltr capacity, dual (5 Ltr / 10 Ltr) valve less including flushing pipe bend PVC bend, PVC connection etc. complete all as specified and directed.

S&F in repair vitreous china WHB white flat back size 550mm x 400mm with and including MS brackets, CP pillar tap fancy type - 01 No of 15mm bore, CP waste coupling 32mm dia, 32mm dia PVC waste pipe of suitable length and PVC connections 15 mm size with PTMT nuts of length 450 mm high pressure complete all as specified & directed.

S&F in repairs 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs chromium plated angle valve 15 mm dia, fancy type screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed

S&F in repairs concealed stop valve 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&Fin repairs CP hot & cold water wall mixure unit with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed.

S&F in repairs 125 mm size brass chormium plated shower rose fancy type with long body including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) approximate size 140x 90x50mm fixed to wall etc complete all as specified and directed.

S&F in repairs PVC connections 15mm bore size 450 in length with both end brass/pvc high quality nuts complete all as specified & directed.

S&F in repairs CP tubular towel rail 600mm long between flanges, 20mm dia, D type etc complete all as specified and directed.

S&F in repairs 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified

S&Fin repairs PVC (SWR) Pipe single socketed in any length with rubber ring joint & fixed to wall with clamps for 110mm dia complete all as specified & as directed.

S&F in repair PVC Bends any radius 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia junction, single (single 'T') equal or unequal with access door complete all as specified & directed.

S&F in repair110mm bore PVC (SWR) vent cowl, complete all as specified & directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with & including clamps complete all as specified

S&F in repairs 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified & directed.

S&F in repairs PVC Bends any radius 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia with accessable door complete all as specified & directed.

S&F in repair PVC (SWR) 75 mm dia junction, single (single 'T') equal or unequal with access door complete all as specified & directed.

Demolation of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks (old size), straright or curved on plan exceeding 6m mean radius built in Cement Mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick (old size), in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6),and in finished the surfaces even and smooth complete all as specified & directed.

M & L for applying two coat of interior oil emulsion over a coat of wall primer incl. preparation of newly plastered walls etc and applying white cement based wall care putty 2mm thick in two layers of 1mm each for leveling the surface complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, including cp jet spray, fixing bolts, flushing cistern and flush pipe and connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repairs multi bib tap 2 in 1, cast copper alloy,chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pie or for brass ferrule of 15 mm bore and fixed complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified & directed.

M & L for complete removal of existing treatment on walls and Preparation of old surfaces and M & L for applying necessary levelling course to the surfaces including properly making of V shape crakes and filling of all cracks with crack seal of walls and including applying two coat of interior oil emulsion over a coat of wall primer and applying white cement based wall care putty 2mm thick in two layers of 1mm each complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L 10mm thick plaster in CM 1:4 with WPC @ 200ml per bag of cement will be applied over the roof slab when concrete is green after the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/Sqcm using cement based cement grout. After the surface is repaireds the slab will be tested for water tightness again before proceeding with further treatment , complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down of old existing accsseible/non accsseible roof, roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc .

M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weight not less than 3 kg/sqm and thickness not less than 3mm comprising with following items complete all as specified and directed:-

Item No. 102.00 Contd... (i) The surface of roof,parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain and outlets a groove shall be cut as specified and directed. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv) Laying of water proofing teratment of weight not less than 3 Kg / sqm and thickness not less than 3 mm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (vi) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including M&L for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site complete all as specified and directed. Note:- Aluminium paint/cool roof tiles if required shall be measured and paid separately under respective item.

M&L for cool roof coloured ceramic joint free tiles 9-10mm thick 300x300mm size , white confirming to sun reflective Index (SRI) value minimum of 90, laid with 3 mm thick spacers, & joints should be filled with epoxy joint filling compound on 15 mm thick over & including 1:3 CM screed bed in accessible roof surface, complete all as specified and directed at site.

M & L Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces in non accessible roof,complete all as specified and directed at site .

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc.

M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green .

For one light point or fan point controlled by one switch complete all as specified and directed.

For one Call Bell point controlled by one push button switch complete all as specified and directed.

For 5 Amp independent socket point controlled by one switch complete all as specified and directed.

For one 3 pin ,5 Amp socket point with other switch on the same board complete all as specified and directed.

All as per item No 106.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl conduit of size not less than 20mm ISI marked, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green incl cutting and chasing in stone/brick masonry complete all as specified and directed.

For one light point or fan point controlled by one switch complete all as specified and directed.

For one Call Bell point controlled by one push button switch complete all as specified and directed.

For 5Amp independent socket point controlled by one switch complete all as specified and directed.

For one 3 pin ,5 Amp socket point with other switch on the same board complete all as specified and directed.

All as per item No 107.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable complete all as specified and directed.

S&F Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular fan step regulator 120 Watt -2 module complete all as specified and directed.

S&F Modular bell push 6A one module complete all as specified and directed.

S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

M&L sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping /pvc conduit of suitable size not less than 20mm of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

M&L surface conduit sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar including taking down complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar including taking down complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.

Supply only TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

Supply only box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed.

M/s arjeet singh ahluwalia (BID ID -3381484)

Pandey Construction and Engrs (BID ID -3382085)

shivansh traders (BID ID -3381676)

Mohan singh (BID ID -3381620)

ARAZAENTERPRISES (BID ID -3381765)

dipangashu barick and associates (BID ID -3381127)

maharaja construction and suppliers (BID ID -3381609)

m/s mahendra kumar khare contractor (BID ID -3381660)

siddhant construction (BID ID -3381718)