Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹71.9 L
EMD Value
₹1.4 L
Closing Date
30 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender .
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: - Execution of Any Signaling work.
29 conditions · 14 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last seven financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022).
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022.
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022.
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC 2022.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
Uploading of declaration regarding Employment/Partnership etc. of RetiredRailway Employees as per GCC-2022 .(ANNEXURE ATTACHED).
Uploading of Tender Forms shall embody the contents of the contractdocuments either directly or by reference and shall be as per specimen form, e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc.
Declaration regarding constitution of firm.
Engineers/Personnel .
Performa of Completion Certificate .
All tender conditions shall be strictly complied with as per the Indian Railways Standard General Conditions of Contract (GCC), April 2022, along with all subsequent correction slips issued thereof along with Annexure (L) attached .
Provision of S&T work in connection with Construction of PQRS siding at BURHPURA station.
JHS-N-W-79-26~NCR
JHS-N-W-79-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹1.4 L
5 Oct 2026
5 Oct 2026
16 Oct 2026
111 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 46,55,162.84 | ||
| — | 6.00 | Per Detection 317566.62 Point (DP) | — | ||
| Multi section Digital Axle Counter (MSDAC) supply, design, installation, testing and commissioning of multi section digital axle counter (MSDAC) complete system as per RDSO Specification INo.RDSO/SPN/176/2013 version 3 with Latest amendments or latest. Suitable for commissioning of yard/Auto Section / dual detection (DCTC/AFTC with MSDAC) . MSDAC should have facility to reset track sections. Design of axle counter circuit indoor installation testing and commissioning of multi section digital axle counter (per unit), supply of essential 10% spares covering all types of cards, 'wheel sensors for MSDAC . Supply of Diagnostic system for Remote diagnostics Tool set for wheel sensor mounting and maintenance of MSDAC consisting of torque wrench, ratchet, testing plate , measuring tape , screw driver, gloves and multimeter fluke 115 (1 Nos. per 14 DP). " "NOTE-1 : 1. If any housing is required to keep outdoor equipment, it has to be supplied with the equipment with no extra cost. 2. Maintenance free earthing (supply and installation) for track device/mushroom housing etc to be done by the contractor if required by system design. No extra cost/ payment will be made by this Railway: 3. Automatic resetting facilities through hardware /software for auto resetting to be |provided by contractor by his own materials for this no extra cost /payment will be made by Railways. 4. MSDAC system networking to be done with central control room. Required hardware PC/ network equipment to be provided by the contractor, no extra cost/payment will be made for this by Railway. E1 Channel/media will be provided by Railway for this purpose from nearest Railway station. 5. All other Hardware like TPR, Extra card to make dual DP, Modem, ethernet switches etc if required for commissioning and final track section pick up will be supplied by contractor, no extra payment will be made by this Railway. 6 Separate evaluator for UP and Down line to be provided at Station/RH as decided by Railway site engineer. For the communication between evaluator to evaluator (RH to Station) Quad/ OFC Link (dark fiber) will be provided by Railway. Any other Networking equipment if required will be supplied by contractor at no extra cost. 7. Manual resetting through reset box at station to be provided as per requirement." The DP configuration/track section may vary as per site , therefore material to be supplied as per instruction of engineer incharge. The material to be supplied as per Annexure-X attached. (Inspection Agency:- RDSO). | — | — | — | 19,05,399.72 | |
| — | 1.00 | — | — | ||
| Supply of Electric Point Machine 143 mm stroke, AC Immunity 160V AC, complete with lock detector and slides for lock detector, non-trailable, to op erte on 110V DC, rotary locking with crank handle universal type as per RDSO Spec. No. IRS:S-24/2002 (Amnd. 1) or latest, RDSO DRG. No. S-10800 (ALT.5 WITH JUNCTION BOX TELESCOPIC. THE MOTOR WILL BE AS PER RDSO SPECN. No. IRS: S-37/82 (AMND. 3) WITH RDSO DRG. No. S-10910. This includes supply of Set of tools as per para 20.1 & 20.2 of RDSO SPECN. No. IRS:S-24/2002 (AMND 1) The following set of tools in a suitable tool box shall be supplied along with every set of eight point machines or less. i). Hand operated square drive socket wrenches of 12.5 mm driving square (short type) as per IS: 7381 for M8, M10, M12 & M18 threads. (One 250 mm long 12.5 mm square extension bar as per IS: 7991 along with compatible Tee handle Square drive as per IS: 7975 suitable for above socket wrenches shall also be provided.) ii). Open jaw wrenches (spanners) for M10, M12, M20, M24 & M33 threads as per IS: 2028. iii). Adjustable wrench. iv). Screw driver 300 mm long. Junction box and two numbers of telescopic pipes of approved type shall be supplied as an integral part of the point machine. (Inspection Agency:- RDSO). | — | — | — | 1,00,402.5 | |
| — | 10.00 | — | — | ||
| Supply of gauge tie plate insulation complete set each set consisting plate T- 10372 = 1No., Bush T- 10368= 3 Nos. and washer - T-10371 = 6 Nos. The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:- Consignee). | — | — | — | 3,819.4 | |
| — | 10.00 | — | — | ||
| Supply of IRS Type point machine 'D'/'P' bracket insulation complete set consisting of the following: - Plate LH-S - 3266 - 1 No, RH - S -3265- 1 No., Plate S - 8804 - 1 No., Bush -S-3199 -4 Nos, Bush S - 8813 - 2 Nos. The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:- Consignee). | — | — | — | 4,800.1 | |
| — | 20.00 | — | — | ||
| Supply of stretcher bar insulation complete set consisting of the following: - Plate-T- 10367-1 No., Bush T- 10368- 3 Nos. and washer-T- 10371 -6 Nos.The material to be procured as per RDSO Specification IRS/S/40- 84 or latest. (Inspection Agency:- Consignee). | — | — | — | 7,629.8 | |
| — | 240.00 | — | — | ||
| Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and Non flame propagating type in 6 meter straight length and of size 120 mm outer dia, & 103.5 mm inner dia. (Th e manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One coupler with suitable rubber O-ring should be supplied with every 6m of pipe length. DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified. (Inspection Agency:- Consignee). | — | — | — | 1,45,648.8 | |
| — | 2.00 | — | — | ||
| Supply of Position Light Shunt Signal Unit Complete, Non-Metallic, made of FRP as per Drg. No. SA-23840 (Adv.) or latest, suitable for LED Signal Lighting Unit.(Supply of LED Unit is not covered in this item). (Inspection Agency:- Consignee). | — | — | — | 34,180.88 | |
| — | 1.00 | — | — | ||
| Supply of Off set brackets for Shunt Signal, made of Mild steel, outer diameter 89 mm (3.5 inch), thickness of pipe 4.5 mm with fixing arrangement on Shunt Signal post as per Drawing No. SA-23080/Adv. along with fixing U bolts, nuts and clamps. (Inspection Agency:- Consignee). | — | — | — | 1,897.88 | |
| — | 500.00 | — | — | ||
| Supply of Disconnect Terminal block for four conductors with screwing cage /clamp type, sliding switch disconnect, as per RDSO spec.No. RDSO/ SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate length of rails for fitting terminal blocks. (Inspection Agency:- RDSO). | — | — | — | 96,360 | |
| — | 2.00 | — | — | ||
| Supply of GSR 120-Li Professional 12V Cordless Drill Driver Kit |10mm Chuck Size| No- load Speed (1st/2nd)- 0-400/0-1500 RPM | Torque (Hard/Soft)- 30/14 Nm | 2 Batteries Included| 1 Yr Warranty make-BOSCH or similar. (Inspection Agency:- Consignee). | — | — | — | 14,912 | |
| — | 5.00 | — | — | ||
| Supply of Optical Power Meter, type-B, make-VIAVI Model -OLP-35 or similar make as per TEC spec. GR/OPM-01/03 Feb. 2005 or latest. Consignee shall approve the supply only after successful demonstration at site . (Inspection Agency:- Consignee). | — | — | — | 87,848.45 | |
| — | 2.00 | — | — | ||
| Supply and testing of optical Laser light source of Make- JDSU Model- OLS-35 or having similar specification. Consignee shall approve the supply only after successful demonstration at site. (Inspection Agency:- Consignee). | — | — | — | 1,53,994.88 | |
| — | 2.00 | — | — | ||
| Supply of Optical Laser Torch make -VIAVI FFL 050 or reputed make. (Inspection Agency:- Consignee). | — | — | — | 16,942.84 | |
| — | 1.00 | — | — | ||
| Supply of digital Cable fault locator for metallic S&T cables of reputed branded make like Stanlay- CS90/KHUSHICOMMS Model Venus 120 or similar, to meet tech GR TIE-02/02. JUL 99 or latest . Consignee shall approve the supply only after successful demonstration at site . (Inspection Agency:- Consignee). | — | — | — | 1,87,327.39 | |
| — | 1.00 | — | — | ||
| Supply and testing of cable route tracer and marker locator of make 3M model- 2273MID/ECU 12W-RT or similar, meet to tech GR TIE-01/02.OCT'99& TEC/GR/TX/TIE-007/02.MAR-14 or latest. Consignee shall approve the supply only after successful demonstration at site. (Inspection Agency:- Consignee). | — | — | — | 4,84,073.22 | |
| — | 500.00 | — | — | ||
| Supply of SC to SC Single Mode Simplex Fibre Optic Patch Cable 5m length. Make:- Syrotech/ Supershopper India or superior. (Inspection Agency:- Consignee). | — | — | — | 2,74,710 | |
| — | 500.00 | — | — | ||
| Supply of Patch cord-LC-LC , 5mtr (Connector make: /Syrotech/3M/Huber- Shuner/ R&M/ TE [Connectivity/Raychem or superior). (Inspection Agency:- Consignee). | — | — | — | 1,54,555 | |
| — | 500.00 | — | — | ||
| Supply of optical patch cord LC-SC (3 Mtr).Make Syrotech/D-LINK or superior. (Inspection Agency:- Consignee). | — | — | — | 67,555 | |
| — | 500.00 | — | — | ||
| Supply of FC/PC-LC/PC Single Mode simplex 5 M Fiber Optic Patch Cord Optical Fiber Cables Connector (5M), Yellow. Make - Syrotech / Radiant / Hanutech or superior. (Inspection Agency:- Consignee). | — | — | — | 1,30,050 | |
| — | 2.00 | — | — | ||
| Supply of Insulation resistance tester. Make Fluke1507 or similar or latest version. (Inspection Agency:- Consignee). | — | — | — | 98,627.4 | |
| — | 2.00 | — | — | ||
| Supply and installation of prewired KLCR Box, wooden crank handle lock inside box, with 8 way terminal strips, LEDs of approved type, for fixing of EKT on wooden board inside box form installing KLCRs/EKTs up to 06 no., including supply of all material like board, handle, hinges, glass sheet etc. (Inspection Agency:- Consignee). | — | — | — | 26,718.24 | |
| — | 10.00 | — | — | ||
| Supply and installation of earth electrode as per NCR latest practice. It includes supply of GI pipe of 3m length. It includes connecting the earth electrode to the equipments which are required to be earthed including digging of earth pit 3 mtr deep and fixing earth electrode pipe, casting of cement concrete enclosure with cover (cover as per NCR practice). It includes installation of 7 strand GI wires as earth lead wires, supported on MS flat size 5mm x 40 mm, soldering and nut bolt both, one end of both earth lead wire and MS flat to earth electrode and other end to Location boxes, block equipments, power equipments, cable sheath, signals etc. as per site requirement and as per instructions given by engineer incharge. (Inspection Agency:- Consignee). | — | — | — | 33,535.4 | |
| — | 2.00 | — | — | ||
| Supply, fabrication and fixing of Retro-reflective Signal number plates as per NCR latest practice, on signal post with contractor's own material like clamp, U bolts, nuts etc. (Inspection Agency:- Consignee). | — | — | — | 1,489 | |
| — | 1.00 | — | — | ||
| Fabrication and supply of point rodding (Ground Connection 143 mm ) set for electric point machine (RDSO Type) as per RDSO Org. No.SA- 8800-01, 20-21, 915 1-52, 9000-01,03- 04,9065-66,9101, as applicable. The material to be procured from RDSO approved firm. (Inspection Agency:- Consignee). | — | — | — | 14,729.27 | |
| — | 1.00 | — | — | ||
| Supply, Installation and commissioning of central gateway. Note: Single centre gateway shall cater maximum up to 32 data transmitter node (Modbus).(As per Annexure A). (Inspection Agency:- Consignee). | — | — | — | 2,11,585.5 | |
| — | 19.00 | — | — | ||
| Supply, Installation, testing and commissioning of data transmitter Node in location box. Modbus Type Note: Maximum range 400 meter. (As per Annexure B).(Inspection Agency:- Consignee) | — | — | — | 3,39,477.18 | |
| — | 2.00 | — | — | ||
| Supply, Installation, testing and commissioning of data transmiter Modbus cum repeater for augmenting range of ourdoor data transmiter node (Modbus), where distance of location box is more than 400 meter with respect to central gateway.(As per Annexure C).(Inspection Agency:- Consignee). | — | — | — | 35,734.44 | |
| Apparatus case Led indication status display unit cum allarm system for yard. Single Display system shall cater to maximum 45 no of location boxes.(As per Annexure D). (Inspection Agency:- Consignee). | — | 1.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ADVANCECORRECTIONSLIP7.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP8.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP9.pdf
ATTACHMENT
79-26TENDERBOOKLETPQRSBPW.pdf
ATTACHMENT
GCC-2022change.pdf
ATTACHMENT
GCC 2022 Correction slip 12
ATTACHMENT
AnnexureARailwayretiredmentengg..pdf
ATTACHMENT
GCC 2022 Correction slip 4
ATTACHMENT
AdvanceCorrectionSlipNo_6.pdf
ATTACHMENT
DIPPtendercondition30.05.2025.pdf
ATTACHMENT
GCCcorrectionslip-5.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf
ATTACHMENT
2021Tele523part13425647.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_10.pdf
ATTACHMENT
HQletterProcurementofMSDAC.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCC2022ACS-3AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
BURPHURASIPTentative_compressed_1.pdf
ATTACHMENT
Allfirmsregimplementationoflabourlaw.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-PolicyCorrectionSlipNo.4.pdf
ATTACHMENT
GCC-2022AdvanceCorrectionSlipNo12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .