Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.2 LAccepted-AOC 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | L1 | Accepted-AOC L1 | |
| 2 | L2₹83.1 L+₹3.2 L (3.95%)Rejected-Finance B 604 VASUNDHRA APARTMENTS PLOT NO 16 SECTOR 6 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹84.3 L+₹4.3 L (5.44%)Rejected-Finance GP RAM COLONY AMRITSAR JALANDHAR 144103 | AMRITSAR | AMRITSAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹84.6 L+₹4.7 L (5.91%)Rejected-Finance 32 PANCHWATI NAGAR BATHINDA PUNJAB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Other than lowest. | |
| 5 | L5₹85.3 L+₹5.4 L (6.72%)Rejected-Finance | L5 | Rejected-Finance Other than lowest. |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer services AF Stn Adampur 144103
GE/AF/ADM-25/2023-24
2023_MES_612150_2
GE/AF/ADM-25/2023-24
Open Tender
Civil Works
Item Rate
90 days
Under GE AF Adampur
Refer NIT and Tender Documentrs
8 documents required · 8 mandatory
₹1,000
GE AF Adampur
₹1.7 L
Yes
21 Oct 2023
11 Sept 2023
25 Sept 2023
11 Sept 2023
23 Sept 2023
11 Sept 2023
Amount
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, pipe line etc. not exceeding 10 Sq.m on plan and getting out complete, all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete, all as specified.
Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete, all as specified.
NOTE FOR SERIAL ITEM 1 TO 3 : Excavation & earth work will be carried out by contractor manually and very carefully without endangering existing underground cables, pipe lines and adjoining structures, if any. In case any damage is caused, the same shall be made good by the contractor without any extra cost to the Govt.
Boring holes under roads, paths, hardstanding, pavements, runway, taxi track of any desciption by trenchless technology using ultrasound technique or by maual bring method of hole technique for passing pipe lines (any description) of 80 to 200 mm bore pipe and including HDPE pipe of suitable size as required for 0.4 Mpa working pressure complete.
Drilling trial bore (bore hole size 250 mm) for new bore well with reverse rotary combination rig plant equipment through any kind of soil/rock strata, upto 250 metre depth from ground level, including submisssion of graphically recorded strata details and disposal of retrieved material to a distance not exceeding 50 metre, complete. (For 02 borewells)
Expanding trial bore (bore hole size 675 mm) for new bore well with reverse rotary combination rig plant equipment through any kind of soil/rock strata, upto 80 metre depth from ground level, including submisssion of graphically recorded strata details and disposal of retrieved material to a distance not exceeding 50 metre, complete. (For 02 borewells)
Expanding trial bore (bore hole size 525 mm) for new bore well with reverse rotary combination rig plant equipment through any kind of soil/rock strata, for depth of 80 metre to 250 metre from ground level, including submisssion of graphically recorded strata details and disposal of retrieved material to a distance not exceeding 50 metre, complete. (For 02 borewells)
Mild steel ERW screwed and socketed casing pipe having wall thickness not less than 8mm, ISI marked (IS-4270), in random length upto 6 metre including necessary fittings and jointing duly painted with a coat of bituminous paint on external surface of pipe, assembling & lowering into bore holes, complete of size: -
250 mm bore, lowering to approx depth of 80 metre to 250 metre from ground level.
300 mm bore, lowering to approx depth of 80 metre from ground level.
Low carbon mild steel slotted (slot size 0.793-1.587 mm) screwed and socketed pipe 250 mm bore having wall thickness not less than 8mm, ISI marked (IS:8110), in random length upto 6 metre including necessary fittings and jointing duly painted with a coat of bituminous paint on external surface of pipe, assembling & lowering into bore holes to approx depth of 80 metre to 250 metre from ground level, complete NOTE: Slot size can be varied depending upon the available strata.
Electro logging in pilot bore for precise delineation of granular zone as also the quality of ground water including report interpretation complete. NOTE:- Electric logging shall be carried out by any approved Govt agency.
8 mm thick Mild steel bail plug 250 mm dia with heavy duty iron hook screwed and welded to casing pipe, complete.
Well cap suitable for 300mm bore pipe having internal and external threading with rings, ribs and welded iron handle suitable for casing pipe, complete.
Housing clamp 600 mm long, 200 mm wide, made out of 12mm thick MS plate (Set of two Nos) suitable for 100mm dia GI column pipe including nuts bolts complete.
Packing, pea gravel of size 2-5mm around casing pipe and slotted pipes in the bore, complete.
Development of tube well by means of over pumping high velocity with 600 PSI air compressure all as specified in IS: 8110-2000, complete. (For two borewell, 24 hour each)
Development of tube well by means of over pumping for subsequent hour unit clear discharge as per 9.3 of IS 2800 (Part-I) 2009 complete.(For two borewell, 8 hour each) NOTE:- Over pumping will be carried out by pumping the well at higher capacity not less 25% the yield of well.
Yield Testing of tube well bore with heavy duty pump of appropriate capacity but not less than 150 Cu.m per hour upto 24 hours so as to determine safe pumping yield, complete.
Galvanised iron 100 mm bore heavy duty, flanged, ISI marked, pipe in 3 metre pieces jointing and lowering into borewell as column pipe with & including suitable size rubber gaskets, nuts, bolts and washers complete all as specified. NOTE: Flanges having thickness not less than 11 mm shall be welded to GI pipe to the entire satisfaction of Engineer-in-Charge.
Fabrication of strata sample box, made out of 20 mm thick veneered particle board and partition with 12 mm thick ply wood with 25 x 25 x 2 mm thick aluminium angle bearer, overall length 1200 x 750 mm with 10 partitions of size 150 mm x 150 mm x 100 mm deep with front glass sheet sliding type cover with aluminium frame all round, 2 Nos key hole plate of size 40 mm x 25 mm x 3 mm, complete all as specified and shown on drawing. Name of tube well, location and strata sample with depth shall be written as directed by Engineer-in-Charge. NOTE: Strata samples and strata chart shall be provided by contractor alongwith the strata sample box without extra cost to the department.
Testing of water for chemical analysis as well as bacteriological potability from any Govt Laboratory and the report shall be submitted to the department, complete.
Submersible pumping set, 5 stage, of discharge capacity 6000 gallon per hour at 90 metre head, and including 3 phase, 50Hz, 415 Volts, suitable capacity electric motor of the same manufacturers, including MS adopter or reducer, tail piece, flange and all accessories for proper functioning of pumping set etc including installation, testing and commissioning complete.
PVC Insulated & PVC Sheathed submersible flat copper conductor cable 3 core of size 10 Sq.mm 3 core, suitable for working voltage 1100 Volts conforming to IS 694 including making connections to motor/starter, complete all as specfied.
Providing water proof cable joint to submersible cable of size 10 Sq.mm 3 core copper conductor, complete.
Lowering of MS centering guide into bore well, made out of flat MS rings, ribs suitable for 300/250mm bore MS casing pipes, complete.
MS reducer, of wall thickness 8mm, screwed at both ends of size 300 x 250mm including necessary fittings and jointing at appropriate length, complete.
Pressure guage 0 to 10 kg/Sq.cm range with necessary siphon and 15mm dia stop valve including 15mm dia GI pipe not exceeding 0.25 metre in length, 15mm brass bib cock on rising main including drilling tapping on GI / DI pipe line complete.
GI Air release valve of 25mm bore with required length of GI heavy duty pipe, clamp etc complete all as specified
MS flat iron clamp 2 No. (150mm x 16mm thick) for holding with 300 mm bore housing pipe including pre-cast PCC block of size 1200mm x 1000mm x 1000mm in (1:2:4) type B-1 using 20mm graded stone aggregates including 100mm bore MS pipe 2 No each 1.5m long with cap plug and cap top for feeding pea gravel for bore well complete.
Tripod provision for bore well, made by 75mm, 6 m long x 3 Nos, heavy duty GI Pipe with one end 150mmx150mm MS Plate 5mm thickness with spikes and another end 16mm thickness, 150 mm dia O ring made by plain SS rod, joining with nut bolt to each other and 500 mm x 3Nos chain sling arranagement for tripod distance allignment suitable for removing/lowering of 100mm dia MS coloumn pipe of bore well complete.
Cutting the existing CI/DI pipes in position for inserting new pipe attachment system, fittings, valves / tees or for making new branches etc. complete all as specified:-
100 mm bore
150 mm bore
Ductile iron pipes, class K-9, centrifugaly cast, flanged ends, ISI marked in any length, laid in trenches/ducts with & including suitable size rubber gaskets, nuts, bolts and washers complete all as specified, of size: -
100 mm bore
150 mm bore
NOTE APPLICABLE TO SERIAL ITEM NO. 30 & 31: Excavation & earthwork and supply only DI specials will be measured and paid for separately under respective item of BoQ.
Supply only DI specials/ fittings of any type, radius, angle, tapers, increasing, decreasing sockets, tees, tail pieces, and collars etc complete.
Cast Iron sluice valve flanged type, class PN 1.6, ISI marked (IS- 14846-2000) complete with stainless steel spindle flanged both ends drilled CI gate with brass ring and iron wheel handle complete all as specified with & including necessary flanged joints & jointing material, suitable for DI/CI pipe of size: -
100 mm bore
150 mm bore
Cast Iron Non return/Reflux valve 150 mm bore, flanged Type, class PN 1.6, ISI marked (IS- 14846-2000) complete with stainless steel spindle flanged both ends drilled CI gate with brass ring and iron wheel handle complete all as specified with & including necessary flanged joints & jointing material, complete, all as specified.
Construction of brick masonary valve pit with and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm x 5 mm with fixing arrangement hinges and locking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation and earth work in any type of soil, returning, filling in approved soil, disposal of surplus soil to a distance not exceeding 50 metre, 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, brick work using pulverised fuel ash lime bricks in cement mortar 1:6, 15 mm plastering in cement mortar 1:4 both internally and externally, 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring complete all as specified, including demolition of existing valve pit having iternal size: --
Earthing with and including GI earth plate electrode 6 mm thick of size 600 mm x 600 mm with 32 mm x 6 mm GI strip earthing lead complete all as shown in electrical plate No. 3 and as specified in Particular Specifications clause 19.5.1 of contract.
Stailess steel high intensity reflective sign board made of hardened ACP sheet 2mm thick pop rivetted to stailess steel rectangular pipe of size 50x25mm frame of 900x1200mm. Frame support with bolts over 60mm round 3 metre long stainless steel pipe of 16 gauge with stainless steel bonded clamp. all stainless steel sheet parts should be polished. sign board should be reflective on side with wide hip sheet and overlay film of blue colour with computer cut letter sign and border & two board on single frame are fixed back to back look one for double side board complete
LT panel board, outdoor type, CPRI approved all as specified in particular specifications of contract clause 19.6 including installation, commissioning & testing, comprising the following components/acessories:- (a) Multifunctional meter electronic with suitable CTs, showing Amp, Volt, PF, HZ and other parameter rating Amp upto 300A & volt upto 500V -01 Set. (b) LED indicating lamp for R,Yand B phases-01set (set of three) (c) Internal power & control wiring with suitable size PVC insulated multistranded copper wire (d) Copper bus bar of 160 Amp capacity, 4 strip mounted on porcelain insulators. (e) MCCB 4 pole, 415 volt, 100 Amp, 25 kA -01No. (Incomming) (f) MCCB 4 pole, 415 volt, 63 Amp, 16 kA - 02Nos. (Outgoing). (g) MCB SPN, 32 Amp, 10 kA, 240 volt, C curve - 02 No.(Outgoing). (h) Automatic star delta starter 40 hp complete wiring with 3 nos contactors ML-1.5 with 1 No overload relay, single phase preventor VSP-II, start stop push button with indicators, and digital Amp meter - 01 Set.
Pooja Singla Builders And Engineers Pvt Ltd
AAR KAY BEE ENTERPRISES
GEMINI PROMOTERS AND BUILDERS PVT. LTD.
ELECTRA ENGINEERS
siddharthenterprises
M/s Sahib and Company
R D Bansal
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .