Renovation of FIP lab in bldg No P-7 at 7BRD and certain minor works at 7BRD, AF

Amount

Dismantling floor hearth or wall tiles including cement mortar (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L Non skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour for Non Skid, coloured ceramic tiles (400x400x7mm thick, in floors etc. set and jointed in neat cement slurry complete all as specified and directed by Engr-in-charge.

M&L for Screed bed or bedding layer of mortar 15mm thick, cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick cement plaster as backing coat in cement mortar (1:4) in skirting/dados complete all as specified and directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles 10 mm thick (Square /rectangular) polished area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (450x350x7mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existings complete all as specified and directed by Engr-in-charge.

Taking down of chowkhat with shutters of any description exceeding 1.5 Sqm and not exceeding 4 Sqm etc. complete all as specified and directed by Engr-in-charge.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 nos.) suitable handle (1 no.) complete all as specified and directed by Engr-in-charge.

S&F ordinary quality sheet glass 4.80 mm thick, ordinary quality and glazing not exceeding 0.5 Sqm in each complete all as specified and directed by Engr-in-charge.

M&L for Formwork for flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, rough finished surface of concrete complete all as specified and directed by Engr-in-charge. .

M&L for Formwork for flat surface to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engr-in-charge.

M&L for providing reinforced cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

M&L for providing reinforced cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in chajjas and landing complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class "B" brick (using old size bricks)straight or curved on plain exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-charge. (9+3.5)

M&L for rendering in cement mortar (1:4), 15mm thick on fair faces of brick or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. (30+11)

M&L for rendering 10 mm thick in cement mortar (1:6) finished even and smooth as on brick work surfaces complete all as specified and directed by Engr-in-charge. (25+8)

M&L for Preparation on newly plastered surface of wall and applying two coats of cement base paint on wall surfaces complete all as specified and directed by Engr-in-charge.

M&L for Preparation of new surface and applying two coats of oil bound distemper over a priming coat using chalk whiting, on wall surfaces complete all as specified and directed by Engr-in-charge.

M&L for rendering 5 mm thick in cement mortar (1:4) finished even and smooth as on concrete surfaces (without using extra cement) complete all as specified and directed by Engr-in-charge.

M&L for Preparation of newly plaster surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for 2nd class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and directed by Engr-in-charge.

S&F 2nd class hardwood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003 complete all as specified and directed by Engr-in-charge.

M&L for Preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge.

M&L for applying Two coats of synthetic enamel paint including preparation of new steel surfaces any description exceeding 10cm width or girth complete all as specified and directed by Engr-in-charge. (4.5+95)

S&F aluminium anodised 150 mm long tower bolt complete all as specified and directed by Engr-in-charge.

S&F aluminium anodised 125 mm butt hinges complete all as specified and directed by Engr-in-charge.

S&F Extruded aluminium ally handles, fabricated type, anodised 125mm long complete all as specified and directed by Engr-in-charge.

S&F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed by Engr-in-charge.

S&F Floor door stopper of aluminium alloy 150mm body and tongue, anodised, with hard drawn steel spring in floor complete all as specified and directed by Engr-in-charge.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engr-in-charge.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed by Engr-in-charge.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and directed by Engr-in-charge. Note: Frame work for ceiling shall be measured and paid separately.

M&L for Preparation new ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.50 mtr depth for foundation etc or for shafts, wells, cesspits , man holes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft /loose soil complete all as specified and directed by Engr-in-charge. (2.7+2.7)

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified and directed by Engr-in-charge. (0.3+0.3)

S&F 9 mm thick Prelaminated particle boards interior grade, prelaminated one side with decorative choice lamination & other side bancing white lamination fixed with screws to timber frame work fixed in repairs complete all as specified and directed by Engr-in-charge.

Extra over item of Prelaminated particle board for external teak wood lipping, 6mm thick, fixed with nails suitable for 12mm thick complete all as specified and directed by Engr-in-charge.

S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed by Engr-in-charge.

M&L for 40 mm brass dia cupboard knobs fixed with nuts, screws and washers of mild steel, bright finished complete all as specified and directed by Engr-in-charge.

Rounding to edge of stone slabs one edge such as steps, cooking platform and other similar situation complete all as specified and directed by Engr-in-charge.

M&L for granite slab (of any type) 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting and polishing etc., complete all as specified and as directed, including rounding to edges of stone slabs and demolition of old stones. slabs and tiles of any description Etc. complete all as specified and directed by Engr-in-charge.

M&L for Preparation of old treated surface by complete removal of existing treatment and applying two coats of oil bound distemper over a priming coat using chalk whiting, on wall surfaces complete all as specified and directed by Engr-in-charge.

M&L for applying one coat of Synthetic enamel paint for wooden surfaces including necessary preparation of old wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed by Engr-in-charge.

S&F MS TMT steel bars 10 mm dia and over cut to length bent to shape reqd. incluing cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape reqd. including cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

M&L for Providing, precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weathering, throating etc complete all as specified and directed by Engr-in-charge.

S&F Aluminium grill (DG 104) 10mm x 5.2 mm thick on 'F' extruded aluminium section of suitable size and fixed with Aluminium windows/ventilators including channel complete all as specified and directed by Engr-in-charge.

Excavation in post holes each 0.50 cum getting out, returning filling in layers not exceeding 25 cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre as in soft/loose soil complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

Demolition of brick work or stone/boulder masonry built in cement mortar of any specification and in any position complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of wall and applying three coats of colour wash complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick Cement concrete ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick Cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate) for finished surface even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also welding fastening and fixing complete Fe-410-W (Gde E-250) quality ‘A’ complete all as specified and directed by Engr-in-charge.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality-B complete all as specified and directed by Engr-in-charge.

S&F structural steel work Fe-410-W(Gde-E-250) quality-B as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Roof/valley gutter/ cladding to wall, fixed with self tapping screws, all joints to be sealed by silicone sealant to the satisfaction of Engr-in charge complete all as specified and directed by Engr-in-charge.

S&F Plain, black, mild steel sheeting in ridges 0.63mm, hips valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engr-in-charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , exceeding 22.5cm and not exceeding 30cm long dia of shank 16 to 20mm complete all as specified and directed by Engr-in-charge.

Removing excavated material exceeding 50 M but not exceeding 250 M complete all as specified and directed by Engr-in-charge.

Returning filling in spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engr-in-charge.

Taking down carefully copper/aluminum point wiring (light/fan /socket power) complete , including fixture and fitting such as switches, ceiling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-charge.

Taking down existing sub main wiring of any size & type and description including removal of teak wood batten/pipe etc complete all as specified and directed by Engr-in-charge.

M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC casing capping medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and directed by Engr-in-charge. Make of Wire: Polycab/Havells/ Plaza

One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way. (30 + 24)

One socket outlet 5/3 pin 5 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 5 AMPS controlled by one switch on indipendent board.

One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC casing caping medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire complete all as specified and directed by Engr-in-charge.

S&F in replacement of Modular switch piano type 10 Amps 0ne way single pole 240 volts A.C complete all as specified and directed by Engr-in-charge. (42 + 24) Make-Crabtree/Legrand/Havells

S&F in replacement of Modular switch piano type 20 Amps complete all as specified and directed by Engr-in-charge. Make-Crabtree/Legrand/Havells

S&F in replacement of Modular socket outlet 10 Amp, 5 pin 240 Volts multi socket for cell phone pin or 2 pin + 3 pin complete all as specified and directed by Engr-in-charge. Make-Crabtree/Legrand/Havells

S&F in replacement of modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed by Engr-in-charge. Make-Crabtree/Legrand/Havells

S&F Ceiling Rose, 3 Phase / PVC/ Polycarbonate, Isolated Body Complete complete all as specified and directed by Engr-in-charge. (20 + 24) Make: Havells/ Legrand/Philips.

S&F LED tube light fitting 1x20 watt LED (4 ft), T-8 LED fitting including LED Tube 20 watt in cool white, 230 volts energy saving, environmental friendly, long life, impact proof, surface mounting , batten suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC Housing in opal finish suitable for wet location with brightness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed by Engr-in-charge.

S&F in replacement of sheet metal enclosure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified and directed by Engr-in-charge. Make : Havells/L&T/Legrand

M&L for replacement of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 125Amp capacity and 12 Nos+ 12 Nos Out going MCB SP complete all as specified and directed by Engr-in-charge. Make: Havells/ L&T/Legrand. Note:- MCCB & MCB's are measured and paid in separate item.

S&F in replacement of MCB SP upto 40 Amps 240 volts, 'C' curve 16 kA complete all as specified and directed by Engr-in-charge. Make: Havells/ L&T/ Legrand

S&F in replacement of MCB SPN capacity 63 Amps 240V, 'C' curve 16 kA complete all as specified and directed by Engr-in-charge. Make : Havells/ L&T/Legrand

S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed by Engr-in-charge. Make : Havells/ L&T /Legrand

M&L in replacement of sub main wiring with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 6 Sqmm and including drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 6 Sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire : Polycab/KEI/Plaza. Note:- One run of conduit, three runs of 6 Sq mm copper conductor is measured as one unit.

M&L in replacement of sub main wiring with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 4 Sqmm and including drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 4 Sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire : Polycab/KEI/ Plaza . Note:- One run of conduit two run of 4 Sq mm copper conductor & one run of 4 Sq mm copper conductor is measured as one unit.

M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete all as specified and directed by Engr-in-charge. Note: GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

M&L for wall mounted fan 400mm sweep 230 Volt single phase plastic body with suitable fastening elements of Input range 140-280 V and Output range 240 + 5 V complete all as specified and directed by Engr-in-charge. (8 + 24) Make:- Cat No. 400 mm stylus wall signal white of Orient or Equivalent in Havells/ Bajaj.

S&F in replacement of metal clad sheet metal plug and socket with 2 pin earth plug including 20 Amps SP MCB, 240 Volt complete including making all connections complete all as specified and directed by Engr-in-Charge. Make: L&T Cat No DBMPS120SD/HAGER Cat No VYA120C/ INDO ASIAN Cat No 811956

Supply, installation, commissioning and testing of split type air conditioning indoor/outdoor complete with cordless remote control unit and within built with BEE 5 Star rating with CFC refrigerant, 2 TR capacity complete, comprising of the following:- (a) Room evaporative indoor unit with speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Outdoor condensing unit of capacity 6500 K cal/Hr capacity with condenser fan motor of appropriate capacity - 01 No air cooled condenser 2 TR capacity – 01 No shall be installed outside the building on and including suitable factory made mild steel brackets/stand fixed on wall using fasteners for fixing and installation of AC’s. (c) Refrigerant copper pipe of suction and discharge line with insulation, condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable shall be fixed. (d) Making good the disturbed surfaces to match the existing surface after plugging the holes etc. Notes: (i) Cutting holes in walls/window of any thickness for installation of AC etc, connection and making good the disturbed surfaces to match with the thickness for installation of AC etc, connection and unit rate quoted by contractor shall deemed to be inclusive of this aspect. (ii) Electrical cable of required size & length to connect outdoor unit with indoor unit and indoor unit to voltage stabilizer is deemed to be included in the quoted rates of contractor. (iii) Copper piping/with insulations and drain piping shall also deemed to be inclusive in quoted unit rate. Make: LG / Blue Star / Voltas as per model approved by GE.

Supply and installation of voltage stabilizer of 5 KVA, 240 Volt, Single phase supply complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable panel light of any type/size/make with proper saftey arrangement complete all as specified and directed by Engr-in-Charge.

S&F LED panel light of 36 Watt LED recessed mounted aluminium frame fitting including LED panel in white, 230 Volt energy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC housing in opal finish suitable for wet location with brightness LED edge lit luminaire suitable for armstrong/grid ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make: Havells/Halonix/C&S

S&F 1'x1' size LED panel lighting luminaire glare free illumination fitting size 300x300x70 mm (LxWxH) of 15 Watt capacity surface mounting with high brightness SMD LEDs complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No PLUTO1X1PLR15WLED840S or equivalent in Halonix/C&S

S&F round shape 12 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make: Havells/Halonix/C&S

S&F round shape 15/18 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make: Havells/Halonix/C&S

M&L in replacement of sub main wiring with two single core PVC insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 2.5 Sqmm and including drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit accessories of ISI marks medium grade including 2.5 Sqmm copper wire for earth continuity wire and connected of common earth dolly complete all as specified and directed by Engr-in-Charge. Make of Wire : Polycab/KEI/ Plaza . Note:- One run of conduit two run of 2.5 Sq mm copper conductor & one run of 2.5 Sq mm copper conductor is measured as one unit.

S&F, installation and testing of LED high bay of capacity 150 Watt with aluminium die cast housing & high efficient LEDs without lens having IP-65 round shaped and complete with all accessories and fixed in the production hangers of height 18 mtr from gound level complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No GAZELLAHBP150WLED857PBOTG or equivalent in Halonix/C&S

S&F LED flood light of 150 Watt, 230 Volt AC with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistant with driver and lamp complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No JETAIRISFL150WLED757ARNBLTG or equivalent in Halonix/C&S

ANAND ENTERPRISES