DVK-SIDS-SCHOOLRENOVATION URUVATTI

Amount

Renovation of school Building (East ) @ Uruvatti ( Panchayat Union Middle school -Two class room ) in Uruvatti Panchayat

Dismandling the existing damaged Pressed including all labour charges etc complete

Finishing with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm (25% New )

Dismantling the demaged plastering including all labour charges etc

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Pointing for RR Masonry with cement mortar 1:3 mix including cost and conveyance of all materials to site and all labour charges etc

White washing two coats, including cost and conveyance all materials and scaffolding charges etc., complete

Oil bound Distempering painting with single coat, Using Oil bound Distemper including cost and conveyance all materials and scaffolding charges etc., complete

Re Painting the walls with Two coats with first class quality Plastic Emulsion Paint of approved colour over a priming coat including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed etc

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting two coats with approved Black Oxide for Old Black board including cost and labour charges etc

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300mm down rod on the existing clamp. (SD No. 107) ( ISI std company)

Providing for 15W LED Bulb SD80

Providing for Rainwater pipe

Providing for Bala Picture paints with Water based Putty plastic emulsion paint for clarity and long life

Chappal rack outside the class room

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastic Emulsion Paint of approved colour over a Two coats including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed ets

Providing cuddapah slab 25mm for shelfs etc., all complete

Construction of new cupboard with shutter

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Distembering single coats with best approved colour with Priming Coat over the including cost and conveyance of all materials to site and all labour charges etc complete

Providing cuddapah slab 25mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Renovation of school Building (North ) @ Uruvatti ( Panchayat Union Middle school -Two class room ) in Uruvatti Panchayat

Dismandling the existing damaged Pressed including all labour charges etc complete

Finishing with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm (25% New )

White washing two coats, including cost and conveyance all materials and scaffolding charges etc., complete

Oil bound Distempering painting with single coat, Using Oil bound Distemper including cost and conveyance all materials and scaffolding charges etc., complete

Re Painting the walls with Two coats with first class quality Plastic Emulsion Paint of approved colour over a priming coat including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed etc

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting two coats with approved Black Oxide for Old Black board including cost and labour charges etc

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300mm down rod on the existing clamp. (SD No. 107) ( ISI std company)

Providing for 15W LED Bulb SD80

Providing for Rainwater pipe

Providing for Bala Picture paints with Water based Putty plastic emulsion paint for clarity and long life

Chappal rack outside the class room

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastic Emulsion Paint of approved colour over a Two coats including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed ets

Providing cuddapah slab 25mm for shelfs etc., all complete

Construction of new cupboard with shutter

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Distembering single coats with best approved colour with Priming Coat over the including cost and conveyance of all materials to site and all labour charges etc complete

Providing cuddapah slab 25mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Renovation of school Building (south ) @ Uruvatti ( Panchayat Union Middle school -Two class room ) in Uruvatti Panchayat

Dismandling the existing damaged Pressed including all labour charges etc complete

Finishing with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm (25% New )

White washing two coats, including cost and conveyance all materials and scaffolding charges etc., complete

Oil bound Distempering painting with single coat, Using Oil bound Distemper including cost and conveyance all materials and scaffolding charges etc., complete

Re Painting the walls with Two coats with first class quality Plastic Emulsion Paint of approved colour over a priming coat including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed etc

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting two coats with approved Black Oxide for Old Black board including cost and labour charges etc

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300mm down rod on the existing clamp. (SD No. 107) ( ISI std company)

Providing for 15W LED Bulb SD80

Providing for Rainwater pipe

Providing for Bala Picture paints with Water based Putty plastic emulsion paint for clarity and long life

Chappal rack outside the class room

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Plastic Emulsion Paint of approved colour over a Two coats including through scraping,clean removal of dirt. The rate includers cost of brushes sand papper,plaster of parries, putty wherever required and neat finishing etc.complete complying with standard specification and as directed ets

Providing cuddapah slab 25mm for shelfs etc., all complete

Construction of new cupboard with shutter

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Distembering single coats with best approved colour with Priming Coat over the including cost and conveyance of all materials to site and all labour charges etc complete

Providing cuddapah slab 25mm for shelfs etc., all complete

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Renovation of school Toilet Building @ Uruvatti ( Panchayat Union Middle school) in Uruvatti Panchayat

Dismantling the demaged plastering including all labour charges etc

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification..

Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification

New door 1.00X1.80m

New door 0.75X1.80m

supply and fixing of Indian type water closet

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

MUTHURAMAN CHANDRAN (BID ID -1155980)