GE/C-45/2024-25 PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10

Amount

M&L for P.C.C 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4.

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed.

Material and labour for preparation of old plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas. Notes for item No 4: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid otherwise tender will be cancelled. (d) A guarantee amount of 5% of contract of work done for item No 4 of BOQ will be retained for 5 years of the completion of work.

M&L for new plaster surface two coat of oil bound destemper over 3mm thick of white putty including preparation of newly plastered surface etc all as specified.

Dismantling of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for glazed ceremic colour tiles (600x300x6-7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).

M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .

Ditto as item No 11 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

S & F in repair for floor mounted EWC one piece incl all necessary fittings incl hydraulic seat cover complete all as specified and directed by Engr -in-charge.

Supply & fixing in repairs vitreous china wash basin, white, flat back of size 550mm x 400mm with Pedestal including 32mm dia PVC flush pipe with coupling and set of brackets incl complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified.

S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern single lever and connection to pipes complete all as directed.

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water single lever for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified.

S&F in repairs CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified.

S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S&Fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L, PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, fitting and mass concrete

M&L, two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation .

S&F 3mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.

M&L PCC 1 : 4 : 8, type D2, using 40mm graded stone aggregates, as in foundation or subbase etc complete all as specified.

M&L chequered cement concrete tiles 30cmx 30cmx 20-25mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6

S&F curtain rod made out of 20mm dia(outer dia )pipe of stainless steel and having including brackets and knobs complete all as specified and directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm)

S&F 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F in repairs magnet catches and striking plate including letting in and fixed, complete all as specified.

Taking down chowkats or frames exc. 1.5sqm but n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

S& F MS framed work such as grills, gratings, chowkhat etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Fe 165 complete all as specified and as directed.

S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.

S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b)

M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.

Supply & fix butt hinges, 100mm medium weight, cold rolled mild steel.

S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Mild steel rolled section or hollow pipes( square or round pipe) as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc. complete all as specifed and directed.

S&F 3mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.

Excavation in trenches n. exceeding 1.5m wide and n. Exc 1.5 mtr in depth, for foundation etc, ior for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in any type of soil.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finsihed fair and even without using extra cement complete all as specified.

M&L for PCC 1:3:6 , type C-1 using 20mm graded stone aggregate as in coping, all as specified and directed.

M&L for two coat cement base paint over a coat of primer on new plastered surfaces of wall complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

Supply mild steel galvanized chain link fencing 3.15mm dia of mesh wire, mesh size 100x100mm with straining bolts, 10mm dia round bars with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc), binding and jointing complete, including necessary drilling, bolting or revetting etc, complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for sepaRately as supply only.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire compete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long and dia of neck 5 to 10 mm, complete all as specified & directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and as directed.

Removing of excavated material n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. all as specified and directed.

M&L 100 mm thick PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc.

M & L 25 mm thick sand filling under floors or in foundations including watering and consolidation.

S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.

M & L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 80 mm thickness M-40 Grade complete all as specified incl 20mm thick.

M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed.

One light /Ceiling fan/exhaust fan point controlled by one switch.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

All as per item No 67 above but point wiring with 4 sqmm single core copper cable and earth continuity wire 2.5 sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engr-in-Charge.

M&L switch Modular type 6 Amp SP One way, 1 module, 230V AC complete complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement LED batten luminaire surface mounted T-8, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

M&L switch Modular type type 16 Amp, 1 way, 1 module with modular plate light marking 230 V AC complete all as specified and directed by Engr-in-Charge.

M&L in replacement modular socket outlet 2/3 pin 6/16 amp universal socket 2 module

S&F Modular socket outlet 2/3 pin 6 amp socket 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fixing wall mounted angular electric chimney black colour of suction power not less than 1200cum/ AI casette with stainless steel outer layer touch control panel, 3 speed motor with 250 watt with decorative smart cokker hood SS and glass, energy efficient LED light iwth digital display, including ducting not less than 12 feet as per site required complete all as specified and directed by Engr-in-Charge.

Schdule of Credit

SHAKYA ENTERPRISES (BID ID -3145464)

HANUMAN BUILDERS (BID ID -3139526)

M/s M M BAHL (BID ID -3146865)

a.k constructions (BID ID -3146031)

DEEP BUILDER (BID ID -3136069)

Lamba Enterprises (BID ID -3136043)