Providng and Fixing stage left and right clusters, OEM Couling plate, Low profile High SPL, passive coaxial two-way point source monitor loudspeake, Compact Indoor Outdoor type IP55 rated wall mount Music Loudspeaker, 8 channel class D etc

Amount

Supply of stage left and right clusters having 14" LF driver or better and multiple MF/HF drivers (More than 4), Biamplified 2 or 3 Way line array loudspeaker system, with Individual Module free field Frequency Range (-10dB) of 55Hz - 18kHz or better & Continuous Power Handling of >= 750W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have Horizontal near dispersion pattern of 90º or better, vertical dispersion of the array shall be 70 degrees or better. The Modules shall be of Baltic birch plywood construction with IP55 weather rating. Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply of OEM Couling plate for array modules, array frame pull back hardware for extreme pitch angles & array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply of Low profile High SPL all weather Fill / Monitor loudspeakers with 5" LF Driver & 1.5" or better VC compression driver; Frequency Range of 90 Hz - 18 kHz or better; Nominal Dispersion : 90°H x 90°V with rotatable horn; Long term Power handling of 150 W or better; Sensitivity : 90 dB; Max SPL : 118dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 80W OEM Input transformer kit for Distributed system applications. Standard wall bracket shall be included. Shall be rated for IP55 outdoor installations as per IEC 529 specs. Approved Make: Bose / L-acoustics / d&b audiotechnik / EAW

Supply, installation, testing & Comissioning of passive coaxial two-way point source monitor loudspeaker with a single 8-12" LF driver and compression driver with 2" or better Voice coil. Frequency Range (-10dB) of 75Hz - 20kHz or better & long term Continuous Power Handling of 150W or better. The Loudspeaker module shall have a Max. SPL (Peak) of 128dB or better. It should have Horizontal dispersion pattern of 110º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a baltic birch plywood enclosure suitable for monitor placement with perforated steel grille. Approved Make: Bose / L-acoustics / d&b audiotechnik / EAW

Supply , installation , testing and commissioning of Compact Indoor/Outdoor type IP55 rated wall mount Music Loudspeaker: Free field Frequency range (-10dB) of 80Hz to 16kHz; Power handling of 64 Watt peak; Nominal dispersion of 150 H X 150 V; Free field Sensitivity of 84 dB SPL and Max SPL of 103 dB SPL peak; Nominal Impedance 8 Ohms; Integral multi-tap Transformer with tap settings of 2/4/8/16 W @ 100V. with Powder-coated steel grille; Brackets with pitch/yaw adjustment included. Approved Make: Bose / EAW / Martin Audio

Supply, installation, testing & Commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Dante based Digitial audio input card for offered multichannel amplifiers.; Port Modes : Switched (default), Redundant Legacy Hardware Isolated (for control only); Interface Data: Dante network audio and control data ; Format 48 kHz, 24 bit PCM; Shall support redundant connections compelte with standard accessories Approved Make: Bose / L-acoustics / d&b audiotechnik

Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz; THD <0.3%; Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs. Approved Make: Bose / PowerSoft/ Ashly Audio

Supply, Installation, testing and commissioning of intregrated low impedence Class D, with Amplifier Power as 2 x 50 W @ 4 Ω, 2 x 25 W @ 8 Ω ; Frequency Response - 40 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤0.3 % (at full rated power) ; Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (any input to speaker output or aux output) ; Maximum Input Level : +10 dBV or better Approved Make: Bose / PowerSoft/ Ashly Audio

SITC of 4-way wideband antenna splitter operating in the frequency range of 470 to 1,810 MHz. Approved Makes: Beyerdynamic/Sennheiser/Shure

SITC of 5o ohm low impaedance coaxial for UHF signals(as per actual)

Floor Mount Box for microphone connectivity (4 x XLR)

Floor Mount Box for floor monitor connectivity (2 x XLR)

Digital Multimedia Lectern

2 Megapixel Fixed Lens Camera IR Dome Type 1/2.8" Progressive scan CMOS 1920x1080 at 25 fps,2.8 mm Fixed Lens 0.028 Lux at F1.2.ICR

CAT 6 Connector

Hard Disk 6 TB

Installation Charges of Cameras

Supply and installation of computer system as required