Additional Civil works for heifers Calves rearing station Karumandurai, Salem

Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excavated earth in layers of not more than 15cm the watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the departmental officers and as per standard specifications.

Earth work Open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling with M-Sand for foundation and basement to required thickness well rammed, watered and consolidated etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and filling with gravel for foundation and basement to required thickness, watered, well rammed and consolidated, etc., completed as directed by the departmental officers.

Plain Cement Concrete 1:4:8 (One Cement, Four M-sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering for flooring and foundation and including side shuttering, compaction, curing etc., complete as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two m-sand and four hard broken stone jelly) using 20mm jelly for the machinery bed and other bed blocks works and flooring including curing (excluding centering) etc., complete as per standard specifications and as directed by the departmental officers.

Supplying , erection and steel centering for all RCC works using M.S Sheet, M.S. angles casurina props C.W.joints for all type of RCC works (ie) beams, roof slab, lintel, column footing, column & roof beam etc., including necessary supports with all cross bracing, filling the slits and holes the reprieved materials should be taken by the contractor and side shuttering etc., complete as directed by the departmental officers- Up to basement Column surface

upto basement - Plain surface

above basement level 3.30m heightPlain surface

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half m-sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers -for Foundation and Basement

Above basement up to 4.50m ht

Supplying, fabricating and placing in position of reinforcement, grills for all RCC works including cost of steel and binding wire , cutting and tying etc., complete by the departmental officers. RTS rods in all floors.(Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in Cement Mortar 1:5 (one part cement and five parts m-sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification-for Foundation and Basement

for above basement up to 4.50m ht.

Brick partition walls of 11.50cm thickness using best qualityII class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three M-Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)Ground floor

Paving the Flooring with ceramic anti-skid tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M-Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (MAKE-Kajaria/Somany/Johnson/CERA).

Paving the Flooring with ceramic anti-skid tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M-Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (MAKE-Kajaria/Somany/Johnson/CERA).

Plastering with Cement Mortar 1:5 (One cement and Five M-sand), 12mm thick in all floors including curing and scaffolding etc. complete complying with standard specification and as directed by the departmental officers.

Supplying anf fixing of Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.(Solid panel PVC door with frame) as directed by the departmental officers.

Supplying, fabricating and fixing inposition Aluminium anodised natural colour matt finish louvered ventilator size 750mm x 450 mm of with outer frame section with 62x38x2mm at 1.174 kg/m and the louvered with moving arrangements made with aluminium channel of size 60x30x4mm with necessary 4mm thick plain glass panel for louvers including cost of all materials, labour and power required for fabrications, chipping dismantling making holes in RCC, masonry and made good to the original condition after fixing etc., complete.

fabricating, Supplying and fixing in position of mild steel (RHS) Rectangular steel hollow section following thickness including cutting, welding and fixing in purlin etc., completed as directed by the departmental officers.

Supplying and fixing in position of Powder coated galvalume colour sheet of 0.47mm thickness with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (Exterior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete as directed by the departmental officials.

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications-20mm dia PVC Pipe

25mm dia PVC Pipe

32mm dia PVC Pipe

40mm dia PVC Pipe

Supplying and fixing in position first quality and approved varity with ISI mark PVC specials and Brass ball valve etc.,-20mm dia Elbow.

25mm dia Elbow.

32mm dia Elbow.

40mm dia Elbow.

20mm dia Tee.

25mm dia Tee.

20mmx15mm Reducer

25mmx20mm Reducer

32mmX25mm Reducer

32mmX40mm Reducer

25mm dia UPVC Ball valve

32mm dia UPVC Ball valve

40mm dia UPVC Ball valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the departmental Engineer before use on the works) -15mm dia S.D Tap

supply and fixing of 15mm dia long body tap etc., complete complying with standard specification

Supplying and fixing position PVC Nahani Trap / Floor Trap of the Nahani Trap of size 75x 50mm with PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification.

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings. etc as directed by the departmental officers.(make-Parryware/Neycer/CERA)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications etc as directed by the departmental officers. (make-Parryware/Neycer/CERA)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (make-Parryware/Neycer/CERA)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.

Supplying and fixing in position "PVC Soil pipes" of pressure - 6kg / cm2 of the following best approved quality and make conforming to ISS of the following diameter and providing leak proof joints with cement, spun yarn etc., including fixing the wall with necessary teak wood plugs, brass screws, mild steel clamps etc., and giving connections to all sanitary fittings including dismantling brick masonry, RCC floor or roof slab etc., wherever necessary and redoing the disturbed porition to the original condition including painting the cast iron pipes and fitting with two coats of anti-corrossive paint etc., complete complying with standard specifications- Below Ground Level -75mm dia PVC Pipe

110mm dia PVC Pipe

Supplying and fixing in position of the following PVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesive etc., including fixing to walls with necessary teak wood plugs screws etc., and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc., complete complying with standard specifications- standard specifications-75MM dia PVC Elbow

110MM dia PVC Elbow

110mm dia PVC Tee

75mm dia PVC door Elbow

110mm dia PVC door Elbow

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Moulded Chamber Burnt Bricks of size 9" x 4 1/2" x 3"with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification- (CLEAR SIZE 0.45 X 0.450)

(CLEAR SIZE 0.60 X 0.60)

Supplying and fixing of Watermark Silver Brass Foot Operated Valve 15mm ,pillar cock & connecting tube for Wash Basin including cost of materials all accessories and labour fixing charges etc., as directed by the departmental officers.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush withwall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Lightpoint / fan point (for electronic regulator) ( 4 points / Coil) Higher End etc., completed (SD 297)

Supply and fixing of bulk head fitting with guard suitable for 18W LED outdoor wall mount with all accessories etc., completed (Make -Luker) SD 83

supply and fixing of 30W/36W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B)with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads withMS clamps and with painting . etc., completed (SD 532)

Supply and fixing of Finolex Multi 2 Core Copper Flexible Cable, 4 sq mm etc., (LR)

Supply and fixing of electrical lamps, fittings and connected accessories etc., -20W 4 Feet LED Fitting with LED (Higher end)

Ceiling Rose (Jumbo) white

5/6A Switch

16/20A Switch with indicator

Supply and fixing of Elbow, bend, Junction box ,Clamps ,screws & Indicator other petty items etc.,

Supply and fixing of RCC fencing post of Size of 0.15 x 0.15 and height of 2.45m including shuttering reinforcement casting finishing fixing in position anc concenyance etc complete

Supply and Fixing of GI Chain link fencing 3" x 3" - 10 G including 6mm plain rod for stiffner (top, middle & bottom) conveyance GI Bending wire etc.,

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Clearing and Levelling the compound fencing portion removing small trees and heavy jungle etc by using JCB (office incharge to be maintained log book and furnish certificate )

Supplying and fixing best quality and make of ready mixed HDPE water storage Water tank having 2000 litres capacity -made of PVC materials- including necessary provision for conveying, jointing delivery line, scour pipe, over flow pipe etc., and lifting the tank to the top of the building placing in position etc., complete as directed by the departmental officers. (The plastic water storage tank should be got approved by the Executive Engineer before fixing in position.)

Manufacturing, Supplying & fixing of Round RCC Precast Rings of 1200mm dia Height of 305mm and thickness 32/40mm including material with transport charges & labour charges etc, completed as directed by the departmental officers.

Supplying and fixing of UPVC (Un-Plasticized Polyvinyl Chloride) Fixed Glass Partition arrangements of required size with 5mm Thickness black /plain glass UPVC Frame with made up of multi chambered section with wall thickness 2mm galvanized steel reinforcement with 1.2mm 100% corrosion free and fitted with imported hardware fittings and EPDM gasket with wall using anchor fasteners and filled with white sealant etc., complete as directed by the departmental officers.

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride(UPVC) sections. The profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. the window unit should be designed with all corner joints mitred and fusion welded. windows should be steel reinforced with 25x24x25mm steel reinforced with a thickness of 1mm to have dimensional stability. the sash should be of 60x102mm. the mullion should be of 60x74mm.the profiles should have co-extruded seals. all the hardware like friction stays, handles should be screwed with self tapping screws.thhe handles, locks should be designed so that they cannot be released from outside. the window system should be glazed with 5mm plain float glass/6mm bison lam installation. the profiles should be cut to length and welded 45 degrees. the window should be designed such that the water drainage does not pass through the reinforcement chamber. the window system should be fixed directly to the plastered brick wall using self expanding nylon piug and driving ms electroplated screws into pilg. the door should be got approved from the executive engineer before use on work.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD 106)

supply and fixing of 18W LED Round type Recessed fitting with LED on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD 531)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc completed. (SD 114)

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)